Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Lewisville
A new driveway gate in Lewisville, TX typically runs $1,800 to $5,600 for a single swing gate, and $2,900 to $8,400 for a slide gate with a motorized opener, depending on width, material, and ground prep. Most installations take one to two days on site, and every project starts with a written price agreed before we touch a post hole. We serve homes across Lewisville, from Orchard Valley Estates to Bellaire Blvd to the neighborhoods north of Main Street.
We know what Lewisville ground does to a gate. The clay soil here swells and shrinks through wet and dry seasons, which punishes shallow footings. A gate that runs fine in August can bind by March. That’s why our crews re-pour and re-set more post footings in Lewisville than almost any other work we do. If you’re planning a new gate, call (469) 530-2485 and we’ll send a technician to measure the opening, check the grade, and write your price.
Why Carver Gate Repair Is Lewisville’s Preferred Gate Installation Company
Lewisville homeowners call us because gate work is all we do. Carver Gate Repair operates under the Garrison Standard, a written set of rules our crews have followed since 2008: background-checked, uniformed technicians on every job, a written price before any work starts, and a 365-Day Done Right Promise on every installation we complete. If something isn’t right within a year, we come back and fix it. That guarantee is in writing.
Lonnie Burke leads our Lewisville-area installation work, and he holds the crew to three non-negotiables: clean post holes, level track, and safety reversal testing on every operator before we leave. We answer the phone with a live person 24 hours a day, so when a Lewisville homeowner calls about a gate that won’t close or a quote for a new install, a real human picks up. No voicemail box. No call-back queue.
Our technicians carry parts for the brands most common in Lewisville: Linear, DoorKing, FAAC, Viking, and more. That means fewer return trips for a missing bracket or control board. We schedule a written estimate at your home, measure the actual opening, and give you a fixed number. The crew that installs your gate is the same crew that honors the guarantee if anything goes wrong.
Sliding Gate Installation in Lewisville
Sliding Gate Installation in Lewisville is often the better choice on narrow lots and along the I-35E corridor, where driveway width is tight and a swing gate would crowd the turnaround. A slide gate runs on a ground track or a cantilever rail, and it takes up no arc space in the driveway. In Lewisville, we recommend deep-post slide gate installs because the soil moves with the seasons. A shallow footing tilts the track within a year, and then the motor overloads and trips. We pour deeper than most DFW crews because we see what happens when we don’t.
Footing and Track Work
The most important part of a slide gate isn’t the gate panel. It’s the footing beneath the track. Lewisville clay expands when wet and contracts when dry, so we dig below the movement zone, set the post in concrete, and check the track with a level after the concrete cures. We recheck it before we hang the gate. That second check catches the quarter-inch shift that ruins an operator’s gearbox later.
Rack and Pinion Setup
A rack and pinion drive on a slide gate gives the motor a mechanical relationship to the gate that a chain or belt drive can’t match. The rack bolts to the gate panel, the pinion engages it directly. If the post heaves, we re-set the rack so the pinion doesn’t bind. A customer in the Orchard Valley Estates area off Main Street had a 12-foot slide gate dragging and tripping its LiftMaster operator every third cycle. The hinge post footing had heaved from clay soil, not a dead motor. We cut out the old footing, re-poured a deeper pad, re-set the rack and pinion, and re-aimed the safety photocell so the gate tracked clean. The gate now runs its full open-close cycle without stalling.
A slide gate installation in Lewisville for a single gate typically runs $2,900 to $8,400, including the operator, track, rack assembly, and safety edges. Wide driveway double slide gates run higher. We’ll quote an exact number before we start.
Gate Opener Installation in Lewisville
Gate Opener Installation in Lewisville means matching the right operator to the gate’s weight, cycle rate, and the Lewisville ground it sits on. You can’t bolt any opener onto any gate and expect it to survive a North Texas summer and a wet spring. Undersized motors burn out on heavy steel gates. Oversized motors slam gates against their stops. Our technicians spec the operator to the gate’s measured weight and width, then run the low-voltage power and set the force limits correctly.
Retrofit on an Existing Gate
Many Lewisville homes already have a manually operated gate, and the homeowner wants automation added. That’s a normal retrofit job. We check the hinges and post for sag first. Reusing sagging mounts is the fastest way to kill a new opener, because the gate binds and the motor strains against its own travel limits. Then we mount the operator, run conduit for power, and wire the safety loop detector if you want vehicle detection.
Safety Reversal and Photocell Testing
Every gate operator we install in Lewisville, TX gets tested to reversal before we call the job done. That means we put a test object in the gate’s path, run the gate closed, and confirm the operator reverses on contact. We also test the non-contact photocell. UL 325 entrapment protection is not a suggestion. A gate that doesn’t reverse is a hazard, and a gate that can’t pass that test when we leave is a gate we haven’t finished.
Gate opener installation in Lewisville typically runs $950 to $2,600 for the operator and installation labor, with higher-end swing and slide operators at the top of that range. The price includes wire pulls, safety edge or photocell setup, and full reversal testing. We quote the number before any work happens.
Trusted Brands We Service in Lewisville
Our Lewisville crews install and service operators from Linear, DoorKing, Viking, and Ghost Controls, plus FAAC, BFT, LiftMaster, Elite, and Mighty Mule. If your existing gate already has a DoorKing or a Viking opener, we can service it without trying to sell you a replacement you don’t need. We keep common parts stocked for Lewisville jobs: control boards, limit switches, loop detectors, and safety edges. That means a faster turnaround when a board fails or a limit switch drifts. Call us at (469) 530-2485 if you’re not sure what brand is on your gate. We’ll identify it and tell you what’s actually wrong.
Common Gate Installation Problems We See in Lewisville Homes
- Shallow post footings on clay soil. A slide gate set on a pad that doesn’t reach below the movement zone tilts after the first wet season. We dig deeper in Lewisville than in most DFW suburbs to stop the operator from seeing a slope later.
- Reused hinges with uncorrected sag. A fresh swing gate panel bound at the hinge post will strain even a properly sized opener. We correct the post before we hang the panel, not after.
- Safety photocells wired but never reversal-tested. We see gates installed by other crews that pass visual inspection but fail the UL 325 entrapment test. We test every install and put it in writing.
- Mismatched operators on heavy gates. A gate that weighs 900 pounds needs an operator rated for 900 pounds, not a 400-pound unit on sale. Wrong spec burns motors within a season in Lewisville heat.
Pricing for Gate Installation in Lewisville, TX
A single swing gate installation in Lewisville runs $1,800 to $5,600. A slide gate with a motorized operator runs $2,900 to $8,400 depending on the gate’s width and material. Adding an opener to an existing gate runs $950 to $2,600. Double gates, custom steel fabrication, and brick or stone columns push toward the top of these ranges. These are Lewisville market numbers, not national averages.
What moves the price is ground prep, electrical runs, and gate weight. A 20-foot heavy steel slide gate needs a bigger motor and a deeper footing than a 10-foot ornamental swing gate. We measure, we write the number, and we do not change it at the door. Call (469) 530-2485 for a free, no-pressure estimate.
We Also Serve Cities Near Lewisville
Our crews cover Lewisville and the surrounding areas, including Lake Dallas, Coppell, The Colony, and Flower Mound. If you’re in one of those cities and need Gate Installation, the same Garrison Standard applies: written price, background-checked technician, and a full-year guarantee. Or if you’re closer in, see Gate Installation in Lewisville for the details on our local work.
Serving Lewisville, TX – Our Local Coverage Area
We’re based in the Lewisville area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Lewisville
We set post footings below the clay soil movement zone, which in Lewisville means digging deeper than the frost line and anchoring below where the soil expands and contracts with moisture. That’s typically 36 to 48 inches, but the exact depth depends on the soil we hit when we dig. A footing that stops short of that depth will tilt the track within a year. Call (469) 530-2485 and we’ll look at your site before quoting.
A slide gate usually fits better on a narrow Lewisville lot, because it runs parallel to the fence line and doesn’t swing into the driveway. On Bellaire Blvd and other streets with shallow setbacks, a swing gate can eat up turnaround space. We’ll measure your driveway and side yard, then tell you which option actually fits before you spend anything.
We install and service Linear, DoorKing, Viking, Ghost Controls, FAAC, BFT, LiftMaster, Elite, and Mighty Mule. If your operator is an older DoorKing or Viking, we can often repair it same-day with parts we stock. Call us at (469) 530-2485 and a live person will help you figure out what you’re dealing with.
Yes. Every installation in Lewisville includes safety photocell and reversal testing before we leave. We put a test object in the gate’s path, run it closed, and confirm the operator reverses. That test is documented on your paperwork and covered under our 365-Day Done Right Promise.
Yes, if the gate and hinges are structurally sound. We check the post for sag, confirm the gate’s weight and width, and spec an operator that handles the load. If the post is heaving, we’ll re-set the footing before mounting the opener. The estimate is free. Call (469) 530-2485 to schedule a measurement at your home.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Lewisville under the Garrison Standard.