Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Mountain View
Gate Repair – Mountain View covers installation that typically runs $3,400 to $8,900 for an automatic driveway gate, and a well-built install on a level lot takes one to two days once parts are on hand. That range covers the post footings, gate fabrication or assembly, operator mounting, safety edges and photo-eyes, and final reversal testing. We work across Mountain View from Shoreline West to Rex Manor and down through Waverly Park, and we quote the job in writing before anything gets dug or drilled.
Call (469) 530-2485 and a live person answers, any hour. You won’t get a call-back queue, and you won’t get a price that moves once the work starts. Lonnie Burke set the standard here, and every Mountain View job runs under The Garrison Standard: background-checked technicians, a written price up front, and a written guarantee on the work.
Why Carver Gate Repair Is Mountain View’s Preferred Gate Installation Company
Most Mountain View driveway gates sit on properties platted during the post-WWII Eichler-era buildout and the 1960s-70s tract expansions, where the driveway apron often slopes 1 to 3 degrees. That’s a grade an operator manufacturer’s install manual assumes is flat. Because of that chronic slope, we set almost every hinge post and operator pad in this city with a string-line level check before we drill a single hole. This is not something crews doing flat-lot work in most of the country bother with, and it’s the difference between a gate that tracks clean for years and one that binds after the first winter.
Mountain View homeowners tell us the same thing: they’ve had technicians no-show, quote one number and charge another, or leave the site littered with cutoff and stripped fasteners. We run a different operation. Every technician who walks onto a Mountain View property is background-checked and uniformed. You know who’s coming through the gate because we tell you in advance, and the price is on paper before the first hole is dug.
We’re part of the Garrison Partners family, operating to The Garrison Standard since 2008. The guarantee is written on every install: if it’s not done right, we make it right, with a full year of coverage from the date of service. A free second visit follows within that window if anything fails. No charge, no argument.
For the full picture of how we work, see Gate Installation across our service area.
Automatic Gate Installation in Mountain View
Automatic Gate Installation in Mountain View means pairing the gate you choose with an operator sized for your actual driveway grade, then wiring entrapment protection that meets UL 325 and gets reversal-tested on site. The gate itself is only half the job. The operator, the safety edges, the photo-eyes, and the loop detector are what make it safe and keep it working when a delivery truck idles at the curb or a kid runs for a basketball near the driveway.
A complete automatic install in Mountain View typically runs $4,800 to $8,900 for a single swing or slide gate, including the operator, safety photocells, two post-mounted keypads, and the control board. Sloped driveways add some labor because hinge posts have to be set plumb against a string line, and the operator pad may need shimmed or adjusted to match grade.
Driveway and Slide Gate Operators
For a sloped Mountain View driveway, we spec slide operators and swing arms with enough torque for the grade, not just the gate weight. The wrong operator on a 2-degree fall skips the rack or overheats the limit switch, and the gate starts drifting out of square within a season.
Pedestrian and Security Gates
Pedestrian gates get the same footing and level-check treatment as the big driveway gates. On Mountain View lots where the side path runs next to a fence on expansive clay, we dig deeper and set the post below the shrink-swell zone so the latch stays put after winter rain.
Gate Installation Services in Mountain View
Gate Installation Services in Mountain View cover the full job, not a bare gate hung on a two-by-four post. We dig the footings to the right depth for local clay, set hinge posts plumb, run power or size the solar array, hang the gate, mount the operator, wire the entrapment protection, and reversal-test everything against the current UL 325 standard. Then we haul off the scrap and sweep the apron.
A standard single swing gate install in Mountain View, with a manual latch and no operator, typically runs $3,400 to $5,200 depending on gate width and whether we’re working with existing posts or setting new ones. Double gates run higher because both leaves have to be hung, matched, and adjusted to meet clean in the middle.
Double Gates and Wide Driveways
Waverly Park and the wider lots off Grant Road often have double gates across a two-car driveway. Both leaves get set independently, then matched with a center stop and drop rod so they don’t sag or bounce in the wind.
New Builds and Tear-Outs
When a Mountain View homeowner replaces a rotted wood gate or a rusted iron one, we tear out the old posts and hardware first. Then we check what’s underneath. More than once we’ve found a footing poured shallow on expansive clay that never should have held a gate in the first place.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mountain View
Our Mountain View crews carry parts and know the programming for Linear, Viking, Ghost Controls, DoorKing, and five more major gate-motor brands. That matters when a board fails on a DoorKing swing operator and the homeowner doesn’t want to wait a week for a part to ship from a distributor. We stock common control boards, limit switches, remotes, and safety-edge contacts locally, so a repair or a new install doesn’t stall for want of a $40 relay. If you already have an operator on the gate, we match the new install to what’s there rather than forcing a brand swap.
Common Gate Installation Problems We See in Mountain View Homes
- Post footings set too shallow for expansive clay. Mountain View’s adobe and clay soils shrink and swell with winter rain. A footing poured 18 inches deep shifts, the hinge post racks, and the gate hangs out of square by March.
- No entrapment protection on older installs. We see plenty of pre-2016 automatic gates in Mountain View that run without photo-eyes or edge sensors. That’s a UL 325 violation and a real safety issue, not a nuisance fix.
- Operators sized for flat lots on sloped driveways. A 1-to-3-degree grade is enough to make an undersized operator skip the rack or burn a limit switch. We check grade before we spec the operator.
- Slide gates on surface-mounted posts. On a Waverly Park driveway with a 2-degree fall from the street, the old slide gate had been surface-mounted to a post footing that was never dug below the frost-line equivalent, so the rack and pinion kept skipping whenever the ground swelled after winter rain. We poured a deeper footing, reset the hinge post plumb against a string line, hung a new slide gate, and paired a LiftMaster operator with a safety photocell and loop detector. The gate has tracked clean through two wet seasons since.
Pricing for Gate Installation in Mountain View, CA
Here’s what Mountain View homeowners can expect, on paper, before we start:
- Manual single swing gate, new posts and hardware: $3,400 to $5,200
- Automatic single swing or slide gate with operator and safety photo-eyes: $4,800 to $8,900
- Double gate, automatic, both leaves with matched operators or a single slave setup: $6,500 to $11,000
- Pedestrian gate, manual latch, new post: $1,900 to $3,100
- Solar operator retrofit on an existing gate (no trenching): $2,200 to $3,800
These ranges assume standard lot access and existing power that doesn’t require a panel upgrade. What moves the number: gate width, double versus single, slope correction on the driveway, and whether we’re trenching power or sizing a solar array. Every Mountain View job gets a written price before work starts. The number on that sheet is the number you pay. Estimates are free. Call (469) 530-2485 for an exact quote.
We Also Serve Cities Near Mountain View
Our crews run Gate Installation work throughout the South Bay and Peninsula. In addition to Mountain View, we cover Los Altos, Sunnyvale, Stanford, and Cupertino. Dispatch and scheduling are coordinated from the brand’s San Francisco Bay Area office, and the same Garrison Standard applies on every job, in every one of those cities.
Serving Mountain View, CA – Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Mountain View
Yes. A sloped driveway means the hinge post has to be set plumb against a string line, and the operator has to be sized for grade, not just gate weight. On Mountain View driveways with a 1-to-3-degree fall, we shim the operator pad and check travel with a level before we anchor anything. An operator spec’d for a flat lot will skip or bind on that slope. Call (469) 530-2485 and we’ll look at the grade before we quote.
We run a dedicated circuit from the panel when municipal power is available, and we fit photo-eyes and a monitored safety edge as standard on every automatic install. Both get wired to the control board, then we reversal-test the gate at the close and open limits on site. If the gate doesn’t reverse under pressure, it doesn’t pass, and we don’t call the job done.
We dig below the shrink-swell zone, which in most of Mountain View means 30 to 36 inches, then set the post in concrete with rebar and let it cure before we hang the gate. Shallow footings are the number-one reason Mountain View gates rack out of square after winter rain. We’d rather wait a day for the pour to set than come back in March to reset a leaning post.
Yes. For single swing gates and lighter slide gates, we install solar operators with a panel sized for the gate’s cycle count and Bay Area winter sun exposure. The trade-off is cycle speed and how many open-close cycles the battery bank handles between charges. For a heavily used double gate, we usually recommend hardwired power. We’ll give you both options, priced in writing, before you choose.
Yes. We install and service Linear, Viking, Ghost Controls, DoorKing, and five other major brands, so if the operator we put in needs a board or a limit switch down the line, we stock the common parts locally and don’t have to order from a distributor and make you wait. Every repair we do, including on a gate we installed, carries the written one-year guarantee. Call (469) 530-2485 to schedule.
Written by Lonnie Burke, Owner at Carver Gate Repair.