Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Mountain View, CA
Gate work in Mountain View follows the housing stock: a mix of 1950s and 1960s ranch homes, 1970s townhouse complexes, and newer builds north of El Camino Real. The older properties often have gates that were installed decades ago, with hardware that has settled and motors that no longer match anything in a parts catalog. We handle that by carrying nine gate-motor brands and writing a price before any work starts. If you need a gate fixed, replaced, or automated in Mountain View, call (469) 530-2485.
Why Mountain View Homes Are Different
Mountain View sits on flat terrain for the most part, which means most gates we see are swing gates rather than slide gates. That sounds simple, but it is not always. The soil here is dense clay in several pockets, and that clay moves with the wet and dry seasons. Gate posts set in clay without deep concrete footings lean within a few years. We see it regularly in the Waverly Park and Rex Manor neighborhoods, where thirty-year-old gates have pulled their hinges out of true.
The climate is the other factor. Mountain View gets enough winter rain and coastal damp to corrode zinc-plated hardware quickly. Gate hinges, latch pins, and motor housings that would last a long time in a drier climate rust here. We specify powder-coated or galvanized hardware on Mountain View jobs by default. It costs a little more up front and it is the difference between a gate that opens cleanly for fifteen years and one that binds at the hinge after two wet winters.
Our Main Mountain View Services
Three jobs make up nearly all of our Mountain View calls: repairing an existing gate, installing a new one, and repairing the motor that opens it. Each has its own page with local detail and pricing.
Gate Repair in Mountain View
Most gate repair calls in Mountain View are sagging gates, rusted hinges, broken welds on steel frames, or latch and lock hardware that no longer lines up. On older ranch homes off Cuesta Drive and Grant Road, the original wood gates are often worth keeping, but the hardware has simply given out. We replace hinges, posts, and frame members where needed, and we quote the repair in writing before touching the gate. Gate Repair in Mountain View
Gate Installation in Mountain View
New gate installation in Mountain View usually means a steel or aluminum frame gate sized for a driveway or a side yard. We measure on site, check the post depth and footing, and build the gate to match the existing fencing. HOA requirements matter here; several Mountain View communities have standards for gate height, style, and color. We work with that paperwork so you do not have to manage it alone. Gate Installation in Mountain View
Gate Motor Repair in Mountain View
Gate motor repair in Mountain View is where we spend a lot of our time. Limit switches wear out, control boards fail after power surges, and swing arms lose their alignment. Because Mountain View has thousands of gated driveways on flat lots, we stock common boards, remotes, and safety sensors locally. If your motor is dead or opening halfway and stopping, we diagnose it on site and quote the repair before doing it. Gate Motor Repair in Mountain View
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Mountain View
We work on Linear and DoorKing motors most often in Mountain View, and we also service Viking and Ghost Controls systems. Those four cover a large share of the operators installed on Mountain View driveways. Parts for common failures are kept on our trucks, which keeps most motor repairs to a single visit. See our brands page for the full list.
Pricing for Gate Company in Mountain View, CA
| Service | Typical range in Mountain View |
|---|---|
| Gate repair service call | $90 – $150 |
| Hinge replacement | $180 – $340 |
| Gate post reset (clay soil common in Mountain View) | $350 – $600 |
| Wood gate repair (rot or frame damage) | $220 – $450 |
| Steel gate weld repair | $150 – $300 |
| Gate latch or lock replacement | $120 – $250 |
| New standard driveway gate installation | $1,800 – $4,500 |
| New side-yard gate installation | $600 – $1,400 |
| Gate motor replacement (parts included) | $650 – $1,600 |
| Limit switch replacement | $140 – $260 |
| Control board replacement | $250 – $500 |
| Loop detector installation | $300 – $600 |
What pushes a Mountain View gate job higher than these ranges is usually a bad post footing, hidden corrosion, or an HOA that requires a specific finish. The figure we give in writing before any work starts is the figure you pay. That is the entire point of the written price under The Garrison Standard.
Neighborhoods We Serve in Mountain View
We run gate jobs across Mountain View every week. The neighborhoods below are where most of our calls come from, but we cover the whole city and the surrounding streets without a trip fee inside the service area. Response time for a gate repair in Mountain View is typically same-day or next-morning, depending on when you call.
- Old Mountain View
- Waverly Park
- Rex Manor
- Cuesta Park
- North Whisman
Service Area – Cities Near Mountain View
Our Mountain View crews also cover the neighboring cities along the Peninsula and the South Bay. Homeowners in Los Altos, CA, Sunnyvale, TX, Stanford, CA, and Cupertino, CA call us when a gate stops opening or a motor fails. Same crew, same written pricing, same guarantee.
Serving Mountain View, CA – Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mountain View
Most Mountain View repairs are scheduled same-day or next-morning. Calls are answered by a live person around the clock, which means you will speak with a dispatcher, not a voicemail box. Emergency gate-down calls get routed to the next available tech.
It depends on your community. Several Mountain View HOAs and townhouse associations require written approval for gate style, material, and height before installation. We prepare simple spec sheets and work with your management office so the gate gets approved the first time. Call (469) 530-2485 and we can talk through your specific HOA.
Every gate repair we do in Mountain View carries a written guarantee good for a full year from the date of service. If the same repair fails inside that window, the second visit is free. That is a plain debt we write into the work order, not a promise made over the phone.
If you are in Mountain View and a gate will not open, sags, or has a dead motor, call (469) 530-2485 for a free estimate. Written price first, background-checked technician at the door, and the work guaranteed in writing for a full year.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mountain View Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.