Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor Repair Across West Hollywood
Gate motor repair in West Hollywood usually runs $240 – $640 depending on whether it’s a control board, a hinge post, or a full operator swap. Most of the calls we take from homeowners off Santa Monica Boulevard, Fountain Avenue, and the streets north of Melrose come down to two things: a motor that won’t hold a cycle, or a keypad that stopped talking to the board. We know West Hollywood’s older courtyard buildings and 1920s bungalows don’t work like a new build in a planned subdivision. Call (469) 530-2485 and a live person answers, any hour.
Why Carver Gate Repair Is West Hollywood’s Preferred Gate Motor Repair Company
Homeowners in West Hollywood call us because our process is written down and it doesn’t change at the door. Every job starts with a written price, delivered before work begins. The technician who shows up is background-checked and in uniform. If the repair doesn’t hold, we come back free inside the guarantee window. That’s the Garrison Standard, and it’s been the operating rule since 2008. Lonnie Burke, who leads our repair crews, holds every technician to it, on every call, in every neighborhood from the Norma Triangle to West Hollywood West.
We work on nine gate motor brands, which matters in West Hollywood because the city’s housing stock is not uniform. A swing operator on a 1930s courtyard property off North Kings Road is a different job than a slide gate off Doheny Drive. We carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means we are not ordering a board and disappearing for a week. The right part is already on the truck, and the repair happens on the first dispatch.
Response time to West Hollywood is fast because our dispatch and scheduling run out of the brand’s Los Angeles office, and crews serve West Hollywood locally. You don’t get a call center script and a four-hour window that slips. You get a named technician, an arrival window, and a phone number that a person answers at 2:00 a.m. if your gate has failed open.
Gate Closer Spring in West Hollywood
Gate closer spring replacement in West Hollywood typically runs $180 – $340 for parts and labor on a standard swing gate. The spring is what brings the gate back to closed and takes the load off the operator motor. When it snaps or stretches, the motor works harder, pulls more current, and burns out the control board. In West Hollywood’s older courtyard buildings, we also see closer springs that were never spec’d for the gate’s actual weight. A 90-year-old iron gate is heavy. The original spring might have been wrong from the day it was installed.
We see this often on the Spanish and Mediterranean revival properties between Fairfax and La Cienega. The gate looks fine when it’s static, but the spring has been losing tension for years. The first sign is usually the gate slamming shut instead of easing closed. That’s the spring gone, and it’s also a safety hazard if a child or a delivery driver is crossing the threshold.
Post Footing and Hinge Integrity
In West Hollywood, a gate closer spring job is rarely just a spring swap. On fifty-to-ninety-year-old properties, the hinge post is often set in a footing that was undersized when it was poured. If the post has shifted even a quarter inch, the gate hangs low and the new spring will wear unevenly from day one. We check the post before we touch the spring. If it needs resetting in concrete, that’s part of the written quote, not a surprise add-on.
Gate Operator Keypad in West Hollywood
Gate operator keypad replacement in West Hollywood runs $220 – $410, including the new keypad, wiring repair where needed, and reprogramming to the existing board. The keypad is the most exposed component on the whole system. It sits out in the sun, the rain, and on streets close to the hills, the salt air that pushes through the Cahuenga Pass. Contacts corrode. Buttons stop registering. The operator still works fine, but you’re standing outside punching a dead keypad after dark.
We were called to a courtyard property off North Kings Road where the client’s LiftMaster swing gate operator had stalled mid-cycle and the keypad entry had gone dead. The real culprit was a rusted hinge post footing that had shifted, throwing the gate off level and tripping the operator’s safety photocell every time the cycle started. We reset the post footing, corrected the sag at the hinge post, replaced the LiftMaster control board, and re-tested the safety photocell and reversal before we left. The gate has run clean through every cycle since.
Wiring Runs and Design Review
West Hollywood’s rent-control and historic-preservation overlay on many 1920s – 40s bungalow and courtyard properties means a swing gate operator that would be a simple swap in a neighboring city often requires preserving the existing hinge post and concealing new wiring and conduit to pass design review. That’s not a paperwork nuisance. It’s the reason we run conduit inside the post or along a concealed route rather than surface-mounting UV-degraded cable across a stucco wall. The keypad has to work, but it also has to look like it belongs on the property.
Trusted Brands We Service in West Hollywood
We service FAAC, BFT, Linear, and Viking operators across West Hollywood, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock local parts for these brands so a scheduled repair doesn’t turn into a two-week parts wait. Viking and FAAC are common on older courtyard gates because they were built for continuous-duty cycles and heavy leaf weights. BFT and Linear show up more on newer installations. We match the parts to the system already in the ground. No one gets sold a brand swap because we happen to have a different motor on the shelf.
Common Gate Motor Repair Problems We See in West Hollywood Homes
- Intermittent mid-cycle stalls on swing gates. Salt air and coastal fog migrating inland through the Cahuenga Pass corrode gate operator control boards and keypad entry contacts faster than in inland LA. The gate starts, stops halfway, then reverses, and the board eventually locks out entirely.
- Operator motors overheating from sagging gates. Fifty-to-ninety-year-old courtyard and bungalow properties often have undersized or non-existent post footings. A sagging gate loads the hinge post until the operator motor overheats trying to compensate, and the motor burns out long before its rated life.
- Loop detector and safety photocell failures. Narrow lots and shared driveway easements across West Hollywood’s dense residential blocks mean loop detector and safety photocell wiring frequently gets pinched or cut during landscaping and trash-day traffic. This silently defeats UL 325 entrapment protection, which is a legal and a personal safety issue.
- Keypad contact corrosion. Gate operator keypads exposed to West Hollywood’s sun and periodic marine layer corrosion develop dead buttons and intermittent codes. The operator is fine, but the entry system fails, and most people don’t realize the keypad is a separate component from the motor.
Pricing for Gate Motor Repair in West Hollywood, CA
Gate motor repair in West Hollywood typically runs $240 – $640 for board replacement, limit switch correction, hinge and footing work, and keypad or spring replacement. A full operator replacement with new arms, photo-eyes, and safety testing runs $1,400 – $2,800 depending on the leaf weight, the brand, and whether the post and footing need work. The price is written down before we start. It doesn’t move at the door. You get a 365-Day Done Right Promise in writing, and if the repair fails inside the guarantee window, the second visit is free. Call (469) 530-2485 for a free estimate.
We Also Serve Cities Near West Hollywood
Our crews handle Gate Motor Repair for West Hollywood homeowners and also cover Beverly Hills, Culver City, Glendale, and Burbank. If your property sits near the border, call us and we’ll confirm coverage. Visit our Gate Motor Repair in West Hollywood page for area-specific details or call (469) 530-2485.
Serving West Hollywood, CA – Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in West Hollywood
Check whether anything is physically blocking the gate path, then look at the hinge post. In West Hollywood, sagging post footings on older properties are the most common reason a swing gate operator reverses mid-cycle. The safety photocell trips when the gate sags out of alignment. Call us at (469) 530-2485 and a technician can diagnose it, usually within one visit.
No, and that’s by design. A new gate motor installation in West Hollywood requires measuring the gate leaf weight, checking the post footing, running power, and testing the UL 325 entrapment protection. Rushing that work produces a gate that fails in a year. We schedule a free measure, deliver a written price, and complete the installation on a scheduled date. Call (469) 530-2485 to book the measure.
Gate motor repair in West Hollywood typically costs $240 – $640 for component-level work like control board replacement, limit switch correction, hinge and footing repairs, and keypad or spring replacement. Full operator replacement runs $1,400 – $2,800. Your exact price is written down before we begin, and it doesn’t change. Call (469) 530-2485 for an exact quote. Estimates are free.
Yes. We service all nine brands including FAAC, BFT, Linear, and Viking, and we stock parts locally for West Hollywood customers so repairs happen on the first dispatch. The technician arrives with the right board, arm, or keypad. Call (469) 530-2485 with your operator’s brand and model.
Yes. Under UL 325, which California law incorporates, automatic gates in West Hollywood must have a monitored entrapment protection system: photo-eyes, a reversing edge, or both. Older courtyard gates sometimes have these defeated by pinched wiring or outdated boards. We test the photo-eyes and reversal function on every repair. Call us at (469) 530-2485 if your gate isn’t reversing properly.
Contact Carver Gate Repair in West Hollywood
If your gate motor is stalling, your keypad is dead, or the gate just stopped responding, call Carver Gate Repair at (469) 530-2485. A live person answers. You’ll get a free estimate, a written price before any work starts, and a repair guaranteed in writing for a full year. That’s how we work in West Hollywood.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving West Hollywood.