Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Arlington
Gate repair in Arlington typically runs $180 to $680 for most jobs, with a technician dispatch to your door in the same day on emergency calls. That range covers the usual failures we see here: a sagging steel gate dragging across a driveway on the Fort Worth side, a Viking operator that stops responding after a freeze, hinge posts that have shifted out of plumb from clay movement. Call (469) 530-2485 and we’ll have a background-checked, uniformed technician at your Arlington property with a written price in hand before any wrench turns.
We work Arlington every day, from the established streets off Park Row to newer subdivisions east of Highway 360. The crews know where the clay soils are worst, which neighborhoods run older DoorKing units, and how quickly we can get from our DFW dispatch office to a gate down near the Mansfield line. Tying every failure back to its local cause is what keeps a repair from becoming a repeat call six months later.
Why Carver Gate Repair Is Arlington’s Preferred Gate Repair Company
Arlington homeowners tend to be direct about what they want: a real person on the phone, a technician who shows up when he says he will, and a price that doesn’t move after the job is open. Every Carver call lands in that lane. Our Arlington dispatches operate on Gate Repair work only, not garage doors, not fencing sidelines. The benefit to you is a stocked truck and a technician who has seen a hundred Arlington gate failures before he pulls into your driveway.
We answer the phone around the clock with a live person, not a menu. When a gate jams open at 11 p.m. and the only thing protecting your backyard is an automated slide panel that won’t move, that matters. Lonnie Burke leads the crew, and the standard he holds is simple: written guarantee on every repair, good for a full year, and a free second visit if it fails within that window. No argument, no requote.
The Garrison Standard is how the crew operates, on every job in Arlington. Technicians arrive background-checked and uniformed. The price is written before work starts. The site is left clean. If the repair fails inside a year, we come back at no charge and make it right.
Metal Gate Repair in Arlington
Metal Gate Repair in Arlington is mostly about steel and wrought iron, and the specific way our expansive Blackland Prairie clay works against a weld or a hinge. A steel gate that looked square when it was installed in 2014 may now be dragging on the latch side because the post footing heaved after a wet April. We repair the gate, but we first correct the footing that shifted it.
Typical metal gate repair here runs $220 to $480. That covers welding a cracked hinge, splicing a rust-thinned bottom rail, re-hanging a gate that has dropped, and reinforcing the post where it meets the operator arm. A full frame rebuild or custom steel work goes higher, and you get the exact figure before we start.
Hinge and Post Work in Clay Soils
Hinges and posts bear the entire weight of the gate, and in Arlington they sit in soil that swells after spring storms and shrinks through August. A post that was perfectly plumb in March can be a half inch out by July. We reset the footing in compacted aggregate, then re-clamp the leaf so the operator no longer fights a misaligned gate.
Weld and Rust Repair
Steel gates near Lake Arlington catch humidity off the water and rust faster than yards a mile inland. We grind back corrosion, weld in new steel where the old has thinned, then prime and paint to match. The goal is a repair that outlives the rust cycle, not a surface patch that opens up again next year.
Wood Gate Repair in Arlington
Wood Gate Repair in Arlington means cedar and pine gates that twist, split, and sag as they age. Wood moves with moisture, and DFW’s swing from soaking spring to oven-dry summer is hard on a wood gate that carries an automated opener. The frame can stay square while the boards cup enough to throw the latch out of alignment.
Expect $190 to $440 for most wood gate repairs. That includes straightening a sagged panel, replacing rotted rails or pickets, recutting the latch throw, and re-balancing the gate so a Ghost Controls or Mighty Mule operator doesn’t strain itself. If the wood is too far gone to hold a hinge, you’ll know before we spend your money.
Sag Correction Before Operator Repair
A wood gate that drags is often blamed on the operator. In Arlington we look at the post footing first, because the clay here moves footings around. We brace the post, correct the sag, and only then touch the operator. Fixing the opener without correcting the sag just means a second call in a few months.
Rotted Rail and Picket Replacement
Water sits in the bottom rail of a wood gate and rots it from the inside out. We cut out the bad section, sister in pressure-treated stock, match the profile and paint, and reset the hinges. The gate ends up stronger at the repair point than the surrounding original wood.
Trusted Brands We Service in Arlington
Carver technicians are factory-trained on the gate operators Arlington homes actually run: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters when a limit switch fails on a Viking or a Ghost Controls board throws a fault code, because we arrive with the right diagnostic knowledge and the right parts already know the equipment. We keep common Arlington repair parts stocked on the truck, so most motor and operator repairs are done the same day.
Call (469) 530-2485 and tell us the brand on your keypad or the motor housing. It speeds up the repair because we’ll pull the right components before we head your way.
Common Gate Repair Problems We See in Arlington Homes
- Clay soil moving the post footing. Blackland Prairie clay swells after spring storms and shrinks in August. Post footings move with it, and a gate that latched in May can drag by July. We reset the footing in aggregate and re-level the gate, rather than adjusting the operator arm to compensate for a structural shift.
- Freeze-thaw damage on the hinge post. Repeated DFW winters crack the post footing and shift the hinge post. A swing gate goes out of plumb and the latch won’t line up. The operator usually gets blamed first.
- Slide gates binding in summer heat. A slide gate on a rack and pinion drive can bind when the metal expands in 100-degree afternoons. The operator trips its limits and the gate stops halfway. We adjust the rack alignment and reset the limit switches.
- Operators dead from power issues at the driveway. No power at the gate means no opener, and Arlington driveways run long. We test the run from the panel to the operator, check the transformer and safety loops, and repair the electrical path, not just the motor.
Pricing for Gate Repair in Arlington, TX
Gate repair in Arlington runs $180 to $680 on most service calls. Hinge and post work sits at $220 to $480. Motor and operator repairs range from $240 to $680 depending on the board, limit switch, or transformer involved. Wood gate repair runs $190 to $440. A full installation of a new gate and operator is a separate job, measured and scheduled, and we provide a written quote after the site visit.
Every price is written before any work starts. No number moves at the door. Call (469) 530-2485 for a free estimate on your gate.
We Also Serve Cities Near Arlington
Along with Arlington, our crews cover Mansfield, Kennedale, Burleson, and Cedar Hill. If you’re on the southern edge of Arlington and your gate backs up to the Kennedale line, we’re already working those streets. The same Garrison Standard applies everywhere we run a truck.
Serving Arlington, TX – Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Arlington
Yes. A dead power run is one of the most common gate failures in Arlington, and we repair the electrical path from the panel to the operator before touching the motor itself. We test the transformer, the breaker, the ground, and the wiring through the conduit, then repair or replace what failed. Most power-loss gate repairs are completed the same day. Call (469) 530-2485 and we’ll walk through what to check before the technician arrives.
Most Arlington calls are reached the same day, and emergency calls at night are answered by a live person around the clock. Because our dispatch runs from a DFW office and our technicians carry Arlington-specific parts stock, a standard repair is often completed in one visit. A broken gate that’s stuck open is treated as an urgent call, not an appointment for next week.
Yes. We work throughout Arlington, from the older streets around Park Row and Cooper to neighborhoods east of Highway 360 and south toward the Mansfield and Kennedale lines. We also cover homes near Lake Arlington where gate hardware rusts faster from the lake moisture. No area of Arlington is outside our service range.
Not meaningfully. Pricing runs about the same across the metro because the cost driver is parts and labor time, not the city line. The difference you control is whether the repair holds. Our Arlington work is built around footing correction on clay soil and freeze-thaw damage, so you don’t pay twice for the same repair. Call (469) 530-2485 for a written quote before any work starts.
Yes. Every Carver repair carries a written guarantee for a full year from the date of service, regardless of who installed the gate originally. If the repair fails within that window, the second visit is free, no argument and no requote. The guarantee covers the repair itself, in writing, on every job.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Arlington with written pricing and guaranteed gate repair.