Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Carrollton
Gate repair in Carrollton typically runs $150 – $450 for common fixes like hinge replacement, realignment, and weld repairs. Motor and operator replacement lands between $650 – $1,800 depending on the brand and whether new groundworks are needed. We dispatch crews from our Dallas-Fort Worth office directly into Carrollton neighborhoods, and every job gets a written price before work starts. If your gate is dragging, binding, or dead at the keypad, call (469) 530-2485 and a live person answers, day or night.
Why Carver Gate Repair Is Carrollton’s Preferred Gate Repair Company
Carrollton homeowners call us because we show up when we say we will and quote a number that does not move. Since 2008, every Carver location has operated under The Garrison Standard: written prices, background-checked uniformed technicians, and a full-year guarantee on every repair. Our Gate Repair crew works on nine motor brands, including FAAC, BFT, and Viking, which means we match the right parts to the system already bolted to your property instead of forcing a generic fix.
We know Carrollton’s housing stock. The city spreads across three counties and includes everything from 1970s ranch homes near Josey Lane to newer builds east of the Bush Turnpike. That matters because gate hardware ages differently depending on the era of construction. Older steel tube gates on brick columns need different attention than modern aluminum panels on powder-coated posts.
Lonnie Burke runs our crew, and he holds every technician to The Garrison Code: arrive within the scheduled window, lay out the price before touching a tool, and leave the site cleaner than we found it. Carrollton residents who have been burned by no-shows or price creep at the door tend to mention that second part first.
Driveway Gate Repair in Carrollton
Driveway Gate Repair in Carrollton usually means one of three things: a swing gate that scrapes or drops, a slide gate that binds halfway, or an operator that hums but does not move the panel. On a typical Carrollton lot, we diagnose the failure right at the post, quote the fix, and complete most repairs in a single visit. Expect $180 – $400 for hinge and roller work, and $200 – $500 if the gate needs realignment after the ground shifts.
Hinge and Post Work
Carrollton’s blackland clay causes posts to lean over time. We reset hinge-post footings deeper and wider than the original, which holds the post in place through wet springs and dry summers. Sagging gates here are usually a footing problem, not a panel problem.
Operator and Access
When the gate itself moves fine but the motor strains, the issue is often limit switches out of position or a loop detector that no longer reads the vehicle. We rebuild or replace motor mounts and rewire keypads so the system works from both the remote and the keypad without jumping over anything.
Gate Welding in Carrollton
Gate Welding in Carrollton covers cracked steel frames, rusted-through bottom rails, broken pickets, and hinge tabs that have torn loose from the post. Homeowners in older Carrollton neighborhoods with original steel entry gates call us for this most often. Welding repairs on a driveway gate in Carrollton typically run $150 – $500 depending on how many points have failed.
Rust Repair and Reinforcement
Years of North Texas heat and humidity hairline-crack the factory welds on older gates. We cut out the rotten section, weld in fresh steel, and grind the repair flat before priming and painting. The gate looks like it was built that way, not patched.
Cracked Rail and Structural Welds
A crack through a bottom rail means the whole gate flexes every time it cycles. Left alone, the motor works harder and the panel eventually drops. We weld the rail, check the other load points, and reinforce any joint that already shows hairline stress. This is the difference between a repair that holds and one that comes apart again in a year.
Trusted Brands We Service in Carrollton
Our Carrollton crew stocks parts and control boards for the systems most common in this market. We regularly work on FAAC swing operators, BFT slide motors, Linear openers, and Viking residential units. Because we carry common boards, limit switches, and remotes for these brands in our service vehicles, we can often complete a repair in one trip instead of quoting a part and waiting a week for it to arrive. When your FAAC gate in Carrollton stops responding or your Linear keypad starts flashing errors, the fix typically does not require replacing the whole system. Most operator failures come down to one failed component.
Common Gate Repair Problems We See in Carrollton Homes
- Post shift from blackland clay: Carrollton’s expansive soil moves with every wet-dry cycle. Swing gates sag and slide gates bind at the hinge post even when the panel itself is straight. We reset footings deeper than the original so the post stops moving.
- Storm surge damage to control boards: Lightning strikes and power surges during spring thunderstorms cook operator control boards. LiftMaster and Linear units are the ones we replace most after a bad storm season.
- DIY groundworks that fail: Gates installed without a proper concrete base or conduit pull the keypad and sensor wiring loose within a season. We rebuild the electrical run and the footing before touching the gate itself.
- Worn articulating arms on swing operators: The arm connects the motor to the gate leaf and takes thousands of cycles a year. When it wears, the gate jerks or stalls mid-travel. We replace the arm and test the full cycle count before we leave.
Pricing for Gate Repair in Carrollton, TX
Here is what Carrollton homeowners should expect to pay. Basic hinge and roller replacements run $150 – $350. Gate realignment after post movement runs $200 – $500. Weld repairs on cracked or rusted steel gates run $150 – $500. Operator or motor replacement runs $650 – $1,800 depending on brand and whether new electrical or concrete work is needed. The price we quote is the price on the invoice. We write it down before work starts and we do not add to it at the door. Call (469) 530-2485 for an exact quote on your gate. Estimates are free.
We Also Serve Cities Near Carrollton
Our Gate Repair in Carrollton team also runs calls to Addison, Coppell, Richardson, and Lewisville. If you are on the edge of town in the north Carrollton corridor or just across the county line, the same crew and the same written-price standard cover you.
Serving Carrollton, TX – Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Carrollton
The post footing has shifted. Carrollton sits on expansive blackland clay that swells when wet and shrinks when dry. The visible gate looks straight, but the underground footing has rotated enough to drop the panel. Fixing it means resetting the hinge-post footing, not just adding washers to the hinges. Call (469) 530-2485 and we will give you a written price for the footing work.
Yes. Under UL 325, every automatic gate operator must have a functioning entrapment protection system, which means photocells, a reversing edge, or both. In Carrollton we test these on every automated gate we touch because sensors fail slowly and quietly. If the gate does the job but the safety edges are dead, the system is not compliant until it is fixed.
Usually, yes. Most operator failures come down to one bad limit switch, a fried control board, or a stripped gear. We replace the failed component when the motor itself is sound, and that runs a fraction of the cost of a new operator. When we do replace an operator, we install it, set the limits, and test the safety edges and reversal cycle before we leave.
Groundworks first, then the gate. A proper installation includes a concrete footing poured deep enough to hold against the clay movement, conduit run for power and data, the gate panel hung and leveled, the operator installed and its limits set, and safety edges with reversal testing completed. Skimp on the footing and the gate fails. Skimp on the wiring and the keypad dies. Call (469) 530-2485 for a written price on the whole job, not just the part that broke.
Most hinge, weld, and realignment repairs take one visit of two to four hours. We schedule Carrollton calls based on arrival windows that account for traffic on Belt Line Road and the Bush Turnpike. Operator replacements that require new concrete work take longer because the footing needs to cure. We will tell you the window and the full timeline before anything starts. Call (469) 530-2485 and a live person schedules the visit.
Call Carver Gate Repair in Carrollton
If your gate is dragging, sticking, or dead at the control, call (469) 530-2485. We answer the phone, schedule a window, and send a background-checked, uniformed technician to your Carrollton home. You get a written price before work starts, a written one-year guarantee when the job is done, and a free second visit if the repair fails inside that year. That is The Garrison Standard. Lonnie Burke and the crew stand behind it on every gate in Carrollton.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Carrollton under The Garrison Standard since 2008.