Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Cleburne
A driveway gate that won’t open in Cleburne isn’t something you can put off until next week. It blocks your vehicles in or out, and it leaves your property exposed. Our gate repair crews answer Cleburne calls around the clock, and in most cases we have a technician at your property the same day you call. The phone number is (469) 530-2485, and a real person picks up. We work on gate operators, hinges, posts, track systems, and full gate installations throughout Cleburne, from the neighborhoods around Nolan River Road out toward the western edge of town.
Cleburne’s soils and weather do specific things to gates, and we’ve spent enough time working on this ground to know what those things are. Heavy clay expands and contracts through wet and dry cycles. North Texas hail and wind storms hit gates hard. The result is that posts shift, gates sag, and operators work against a structure that’s no longer square. We check the footing before we touch the hinge, because in Cleburne that’s usually where the problem actually lives.
Why Carver Gate Repair Is Cleburne’s Preferred Gate Repair Company
Carver Gate Repair runs on The Garrison Standard. Every technician who pulls up to a Cleburne home is background-checked and uniformed, so you know exactly who you’re letting through your gate. The price is written down before any work starts. It doesn’t move at the door. And every repair carries a written guarantee, good for a full year. If the repair fails inside that window, we come back and make it right at no charge. That’s the 365-Day Done Right Promise, and it’s not an upsell. It’s the way every Carver job operates.
Lonnie Burke leads the team, and the standard he holds is simple: show up when you say you will, explain the work in plain English, put the price in writing, and leave the site clean. Cleburne homeowners who’ve dealt with no-shows and estimates that grew halfway through the job tend to notice the difference. We dispatch from our Dallas-Fort Worth office, and crews serve Cleburne locally, so a technician who knows your streets is usually close by.
We work exclusively on gates and gate motor systems across nine major brands. That focus means the technician at your house has likely seen your exact failure mode before. When a homeowner off Country Club Road called about a 16-foot slide gate dragging and tripping its LiftMaster operator, the operator was fine. The post footing had shifted in the clay and pulled the track out of plumb. We re-set the footing, re-leveled the track, adjusted the rack and pinion, and re-tested the safety photocell before we left. That’s the kind of repair that looks like an operator problem and turns out to be a ground problem, and it’s common in Cleburne.
Driveway Gate Repair in Cleburne
Driveway Gate Repair in Cleburne starts with a footing check. The clay soil here expands when wet and shrinks when dry, and that cycle applies steady pressure against gate posts. A swing gate that drags or won’t latch is often sitting on a post that’s no longer vertical. In Cleburne, a typical driveway gate repair runs $180 to $650 depending on whether we’re correcting a post, replacing hinges, re-leveling a track, or swapping a damaged operator arm. A full operator replacement lands higher, usually $850 to $2,400 with the parts and labor included.
Swing Gate Post and Hinge Correction
On a swing gate, the post is everything. When clay movement torques the hinge post out of plumb, the gate sags, the latch misses, and the motor fights the misalignment until something burns out. We re-set the post in new concrete, re-hang the gate square, and verify the operator’s open and close limits before we call the job done.
Slide Gate Track and Roller Repair
Slide gates in Cleburne take a beating from storm debris, wind-driven grit, and the same shifting ground. When a roller wears flat or the track gets knocked out of level, the gate drags and stalls. We replace rollers, re-level track sections, and inspect the rack and pinion mesh so the operator isn’t pulling against a bound-up gate.
Gate Welding in Cleburne
Gate Welding in Cleburne covers the steel repairs that keep a gate from falling apart after years of North Texas weather. Hail dents panels, wind cycles flex welds until they crack, and moisture wicks into joints and starts rust that expands and splits the metal. Most Cleburne gate welding jobs run $220 to $780, with the range set by how much of the frame we’re repairing, whether we’re cutting out rusted sections, and whether the gate needs to come off its hinges for the work.
Cracked Frame and Hinge Welds
When a weld cracks at a hinge point, the gate starts to move in ways it wasn’t designed to. We grind out the failed weld, re-weld the joint, and reinforce the area if the original design put too much stress on one point. The gate gets re-hung and lubricated before we leave.
Rust Repair and Panel Patching
Rust on a gate frame isn’t cosmetic. It thins the steel and eventually causes structural failure. We cut out rusted sections, weld in new steel, and grind the repair smooth. If the gate is painted, we’ll match the finish as closely as the existing coating allows and recommend a rust-inhibiting treatment for the repaired area.
Trusted Brands We Service in Cleburne
Our technicians are trained on the systems already installed in Cleburne homes, so we don’t show up and tell you to buy something new because we don’t know your equipment. We work on Linear and Viking swing and slide operators regularly, and we service DoorKing and Ghost Controls units as well. Because we stock parts for these brands locally, turnaround on Cleburne repairs is faster than waiting on a special order. If your operator is an older model that’s been discontinued, we’ll tell you straight and give you options that fit the existing gate rather than pushing a full replacement.
Common Gate Repair Problems We See in Cleburne Homes
- Hinge-post movement in clay soil. The post shifts over wet-dry cycles, the gate squares itself against the ground, and the operator strains until it trips or burns out. Fixing this means re-setting the post, not just swapping hinges.
- Storm damage to slide gate tracks and rollers. Hail and high wind knock tracks out of level and trash rollers. The rack and pinion then falls out of mesh, and the operator stalls mid-travel.
- Safety photocells and edge sensors knocked out of alignment. A gate that runs but doesn’t reverse properly violates the UL 325 entrapment protection requirement. We test every safety input on every service call.
- Operator failures from overwork. When a gate fights a misaligned post or a dragging track long enough, the operator’s limit switches and gears wear out. The operator looks like the problem, but the ground is where it started.
Pricing for Gate Repair in Cleburne, TX
Most Cleburne gate repairs land between $180 and $780. Basic hinge and latch work starts around $180. Track and roller repairs typically run $300 to $550. Post re-setting on a swing gate is usually $400 to $750 depending on footing size. Gate welding work is $220 to $780. A full operator replacement runs $850 to $2,400. We give you the written price before any work begins, and that number doesn’t change unless you approve additional work in writing. Call (469) 530-2485 for a free estimate on your specific gate, and we’ll tell you what it costs and what it takes to fix it.
We Also Serve Cities Near Cleburne
Our crews cover Cleburne and the surrounding communities. If you’re in Keene, Joshua, Alvarado, or Burleson, the same Gate Repair team and The Garrison Standard apply. For more about how we serve this area specifically, see Gate Repair in Cleburne. Same written pricing, same background-checked technicians, same full-year guarantee.
Serving Cleburne, TX – Our Local Coverage Area
We’re based in the Cleburne area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Cleburne
Because the hinge post is almost certainly moving in the clay. Cleburne’s expansive soil pushes against the footing as it cycles through wet and dry seasons, and the post drifts out of plumb. New hinges don’t fix a leaning post. The footing has to be corrected and the post re-set before the gate will hold square. Call (469) 530-2485 and we’ll check the footing before we touch a hinge.
No, and anyone who promises that is skipping steps. A proper automatic gate installation requires setting posts in concrete and letting the concrete cure, running power to the operator, mounting the operator and safety edges, and testing the full UL 325 entrapment protection sequence. In Cleburne’s clay soil, rushing the footing cure is exactly how gates end up leaning in a year. A typical installation takes a few days from groundworks to final testing. We’ll quote you a written price and a realistic schedule before we start.
Not necessarily. In Cleburne, the more common cause is a mechanical bind from a shifted post or a dragging track that stalls the gate while the operator still cycles. If the operator runs and the gate doesn’t move, the operator may be fine. We check the footings, track level, and drive mechanism before condemning the operator. It’s cheaper to fix a binding track than to replace a motor that was never the problem.
We carry parts and repair experience for Linear, Viking, DoorKing, Ghost Controls, and five other major gate-motor brands. If your gate runs on any of those, we can usually repair it without replacing the whole system. We’ll tell you if your operator is too far gone or discontinued, and then give you written options that work with your existing gate.
Your gate should stop and reverse when it encounters an obstruction, and its safety photocells and edge sensors must be aligned and functioning. After hail, wind, or any ground movement, those sensors get knocked out of alignment easily. Every Carver service call includes a UL 325 safety test, and we’ll show you the results before we leave. If your gate hasn’t been tested after a storm season, call (469) 530-2485 and we’ll check it.
Get Your Cleburne Gate Working Right
If your gate is sagging, stalling, or not running at all, call Carver Gate Repair at (469) 530-2485. A live person answers, we schedule a background-checked technician to come to your Cleburne property, and you get a written price before any work starts. Every repair carries a written one-year guarantee through the 365-Day Done Right Promise. We’re not the cheapest bid in Cleburne, and we don’t try to be. We show up, fix the actual problem, and stand behind the work.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Cleburne since 2008.