Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Hillsborough, CA
Hillsborough gate work centers on large estate properties, many with long driveways and heavy custom gates. The lots, the setbacks, and the salt air off the bay all shape how a gate is installed and repaired here. This page covers what Hillsborough homeowners should know about gate service in town, along with local pricing, neighborhoods, and how our crew works. If you need a repair right now, call (469) 530-2485 and you’ll get a live person.
Why Hillsborough Homes Are Different
Hillsborough isn’t like most Bay Area neighborhoods. Minimum lot sizes run half an acre, and a good number of properties sit on an acre or more. That means driveway gates aren’t decorative afterthoughts here – they’re the first line of the property, often set back from the road, wired for intercoms and cameras, and built heavy to match the rest of the estate.
The soil matters too. Hillsborough sits on a mix of clay and serpentine in places. Clay expands and contracts with the season, which shifts gate posts slightly over the years. A gate that worked fine in October can bind by March because the post has moved a fraction of an inch. We see this constantly on the older estates near Burlingame and along the Ralston Avenue corridor.
The coastal air is another factor. Homes on the hills catch morning fog from the bay, and that moisture works on exposed hinges, track rollers, and circuit boards. A gate motor installed five years ago can look clean on the outside and be corroded at the control board connectors. Hillsborough homeowners also deal with stricter Hillsborough city code enforcement on fence and gate setbacks, so any new installation has to be measured carefully before we order materials.
Our Main Hillsborough Services
Most calls fall into three buckets: a gate that won’t open, a gate that needs to be replaced or added, and a motor that runs but won’t move the gate. Each has its own Hillsborough page with full details and pricing.
Gate Repair in Hillsborough
Most of our Hillsborough repair calls start with a gate that’s sagging, dragging, or refusing to cycle. The underlying causes here are usually a post that’s drifted out of plumb, a hinge that’s been carrying too much weight, or a wheel that’s worn down on a long gravel or paver driveway. Our technicians inspect the full gate before touching anything, then hand you a written price that covers the fix. That number doesn’t move once work starts. See the full scope on our Gate Repair in Hillsborough page.
Gate Installation in Hillsborough
A new gate in Hillsborough has to handle the slope, the setback rules, and the weight of whatever design you choose. Whether it’s a sliding estate gate, a swing gate at the top of a driveway, or a pedestrian gate next to the main entry, we measure the site first, check the existing posts and power run, and give a written quote that includes materials, labor, and the operator system if you want it automated. Details and pricing are on the Gate Installation in Hillsborough page.
Gate Motor Repair in Hillsborough
When the opener runs but the gate barely moves, the issue is typically a limit switch, a worn gearbox, or a loop detector that’s no longer sensing the vehicle. Hillsborough’s long driveways put more cycles on motors than a typical suburban gate, and the marine air accelerates wear on boards and connections. We carry parts for the major brands and come prepared to test the full electrical path, not just guess at a board swap. See Gate Motor Repair in Hillsborough for specific motor pricing and symptoms.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Hillsborough
We work on Viking, Ghost Controls, and DoorKing motors most often in Hillsborough, along with Elite operators on larger estate gates. Parts for these brands are stocked in our Bay Area service vehicles, so a single-visit repair is common. See our brands page for the complete list.
Pricing for Gate Company in Hillsborough, CA
| Service | Typical range in Hillsborough |
|---|---|
| Gate repair, general | $180 – $340 |
| Gate motor repair | $220 – $450 |
| Gate motor replacement | $550 – $1,100 |
| Full gate installation | $2,500 – $7,000+ |
| Hinge replacement | $120 – $250 per hinge |
| Track and roller replacement | $280 – $520 |
| Limit switch replacement | $130 – $220 |
| Loop detector replacement | $160 – $300 |
| Control board replacement | $280 – $520 |
| Intercom or keypad wiring | $160 – $340 |
Prices in Hillsborough trend toward the upper end of these ranges when the gate is oversized, the driveway is steep, or the existing wiring needs to be pulled and re-run. That’s also why we put the written price in your hand before any work begins – the number you approve is the number you pay.
Neighborhoods We Serve in Hillsborough
We cover all of Hillsborough, from the estates near the Burlingame Hills border up through the roads off Ralston Avenue. Response is typically same-day for repair calls, since our Bay Area dispatch coordinates Hillsborough jobs locally.
- Ralston Avenue corridor
- Burlingame Hills border
- Lower Hillsborough flats
- Upper estate roads off Skyline
- Crystal Springs area
Service Area – Cities Near Hillsborough
While this page covers Hillsborough specifically, our crews also handle gate work in nearby cities. Homeowners looking for service south of the city can check San Jose, CA or Los Angeles, CA. To the east and north, we serve San Francisco, CA and San Diego, CA.
Serving Hillsborough, CA – Our Local Coverage Area
We’re based in the Hillsborough area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hillsborough
Most Hillsborough repair calls are handled same-day. Our Bay Area dispatch coordinates Hillsborough schedules based on the order calls come in. Emergency situations – a gate stuck open or one that won’t secure – are prioritized. Call (469) 530-2485 and a live person will give you a straight arrival window.
Hillsborough enforces setback and fence-height rules on new gate installations. A direct replacement of an existing gate typically doesn’t require a permit, but a new automated gate or any change to the driveway approach often does. We check the specific requirements for your property before we order materials.
Every gate repair we perform in Hillsborough carries a written 365-Day Done Right Promise. If the repair fails inside that year, we come back and correct it at no charge. That’s a written guarantee, not a verbal one, and it applies to every repair we do.
If your gate is acting up in Hillsborough, call (469) 530-2485. A live person answers around the clock, and we’ll give you a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hillsborough Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K.