Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Lynnwood, WA
Carver Gate Repair handles gate repair, gate installation, and gate motor repair for homeowners across Lynnwood, WA. If your gate won’t open, sags on its hinges, or the motor runs but the gate won’t move, call (469) 530-2485 and a live person answers, day or night. Lynnwood’s mix of 1960s through early-2000s housing stock, wet winters, and sloped lots means gate posts shift, motors work harder, and hinges corrode faster than homeowners expect. We write the price down before any work starts, so the number you approve is the number you pay.
Why Lynnwood Homes Are Different
Lynnwood’s weather does most of the damage. From October through April, rain works its way into post footings and hinge welds. Wood gate frames swell. Steel hardware rusts. In the Alderwood and Meadowdale neighborhoods, we see gates that have spent twenty years in wet soil, and the posts lean just enough to bind the latch. On sloped lots near Scriber Creek, a gate that swings downhill pulls hard on the top hinge and sags within a few seasons. That’s normal here, and it’s repairable.
Housing stock matters too. Many Lynnwood homes were built between the 1960s and 1990s, which means gate openers installed in the 2000s are now hitting the end of their service life. Limit switches wear out, loop detectors fail after years of exposure, and articulating arms develop slop at the joint. The city also has a patchwork of HOA communities with their own rules about gate appearance and replacement, so we coordinate with homeowners on what the association requires before ordering materials.
Our Main Lynnwood Services
Most Lynnwood homeowners call us first about a gate that stopped moving or a motor that runs without moving the gate. Here’s what each job involves locally.
Gate Repair in Lynnwood
A sagging gate is usually the post, the hinge, or the frame. In Lynnwood, we often find the post itself has loosened in wet ground, which means re-setting it in concrete rather than just tightening bolts. Hinges on older steel gates seize from rust, and we replace them with sealed-bearing hardware sized for the gate’s weight. If the gate drags on the driveway, the frame may need a diagonal brace added. Every repair gets a written price first. Full details are on the Gate Repair in Lynnwood page.
Gate Installation in Lynnwood
New gate installations in Lynnwood start with the post depth. Wet soil freezes and shifts, so posts need to go below the frost line and be set wider than code minimums on sloped ground. We build gates from steel or wood, match the hardware to the weight, and set the opener only after the gate swings true by hand. The goal is a gate that doesn’t sag in year three. We measure, quote, and schedule at your pace. See Gate Installation in Lynnwood for the full scope.
Gate Motor Repair in Lynnwood
When an opener hums but the gate doesn’t move, the cause is usually a failed capacitor, a stripped gear, or a limit switch that’s out of adjustment. Rain intrusion into the control box is common in Lynnwood, especially on openers mounted without a weather hood. Our technicians work on Linear, Viking, Ghost Controls, and DoorKing systems, and we carry the common boards and gears for same-visit replacement where the diagnostic is straightforward. See Gate Motor Repair in Lynnwood for pricing and turnaround.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lynnwood
We service gate motors from Linear, Viking, Ghost Controls, and DoorKing, among others. Our techs carry common replacement boards, gears, and limit switches for these brands on the truck, which means many Lynnwood motor repairs finish on the first visit. Check our brands page for the full list of supported equipment.
Pricing for Gate Company in Lynnwood, WA
| Service | Typical range in Lynnwood |
|---|---|
| Gate repair, minor (hinge adjustment, latch realignment) | $125 – $250 |
| Gate repair, moderate (post reset, frame straightening) | $250 – $500 |
| Gate repair, heavy structural (replace steel frame section, rehang gate) | $500 – $900 |
| Automatic gate opener repair (limit switch, gear, or capacitor) | $180 – $350 |
| Gate motor replacement, single swing | $700 – $1,200 |
| Gate motor replacement, slide gate | $900 – $1,500 |
| New gate installation, single swing (steel) | $2,500 – $5,000 |
| New gate installation, double swing (steel) | $4,000 – $8,000 |
| New gate installation, slide driveway gate | $5,000 – $9,000 |
| Access control wiring (keypad, intercom, loop detector) | $400 – $800 |
Prices in Lynnwood run higher than flat, inland lots when posts need extra concrete work or the gate hangs on a slope where gravity fights the hardware. Whatever the number is, it goes in writing before we touch the gate. No surprises at the end of the job.
Neighborhoods We Serve in Lynnwood
We cover all of Lynnwood, including Alderwood, Meadowdale, and the residential streets near Scriber Creek. Most repair calls get a technician dispatched the same day or next morning, depending on when you call and how urgent the problem is.
- Alderwood
- Meadowdale
- Scriber Creek area
- North Lynnwood
- Picnic Point
Service Area – Cities Near Lynnwood
Our Lynnwood crews also cover the neighboring communities, so if you live just outside the city limits we can usually reach you the same day. We serve Mountlake Terrace, WA, Kenmore, WA, Edmonds, WA, and Bothell, WA. Dispatch and scheduling are coordinated from our Seattle office, with crews working Lynnwood locally.
Serving Lynnwood, WA – Our Local Coverage Area
We’re based in the Lynnwood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lynnwood
For a gate that’s stuck open or won’t close, we typically dispatch a technician the same day you call. Non-emergency repairs are usually scheduled within one business day. Call (469) 530-2485 and a live person tells you the first available slot.
If your neighborhood has an HOA, check your covenant documents before ordering a new gate. Some associations require approval for style or color changes. We can provide the specifications your board asks for, but the approval itself comes from the association.
Yes. Gate motor repair is one of our core services in Lynnwood, and many opener problems are fixed in a single visit because our techs carry the common parts for Linear, Viking, Ghost Controls, and DoorKing motors on the truck.
Contact Carver Gate Repair in Lynnwood, WA
If you need gate repair, gate installation, or gate motor repair in Lynnwood, call (469) 530-2485 now. A live person answers 24/7, gives you a straight answer on scheduling, and books your free estimate. Every job gets a written price before work begins, and every repair carries our written guarantee for a full year. That’s the standard on every Lynnwood job, no exceptions.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lynnwood Customers Say
"Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.