Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Maplewood, WA
We’re Carver Gate Repair, the gate specialist serving Maplewood, WA. When a gate stops opening in Maplewood, it usually comes down to one of three things: a motor that’s given out, a hinge or wheel that’s worn past adjustment, or a control board that stopped talking to the remote. This page explains what gate work costs here, which neighborhoods we cover, and what makes Maplewood jobs different from work in Seattle or Tacoma. If you need a technician today, call (469) 530-2485 and you’ll reach a live person, not a voicemail box.
Why Maplewood Homes Are Different
Maplewood sits in the wet side of Washington’s climate, and that changes gate work in ways homeowners don’t always expect. Steel posts set in soil that cycles between soaked and dry will shift. Powder-coated iron holds up better than raw steel, but the hinges take the real beating when moisture gets under the coating. We see gate jobs in Maplewood where the post is solid and the gate leaf itself is fine, but the lower hinge has worn into an oval from a gate that was never re-leveled after the first wet season.
Homes here run the full age range. Older properties often have swing gates hung on masonry pillars, which means repair work has to account for what’s behind the stucco or brick before we drill. Newer construction favors aluminum driveway gates with slide operators, and those need a different set of parts than a wrought-iron swing gate. The terrain matters too: a gate on a slope works against its operator every time it opens, and the fix usually involves adjusting the limit switch and checking the arm geometry, not just bolting on a bigger motor. Maplewood homeowners also deal with the same county setback rules as the rest of the region, so we always confirm where the gate sits relative to the property line before recommending an installation.
Our Main Maplewood Services
Most calls from Maplewood homeowners come in for a gate that’s stuck, followed closely by a full replacement. Here’s what each job involves and where to find the detailed page.
Gate Repair in Maplewood
A typical Gate Repair in Maplewood call starts with a gate that won’t open or won’t close all the way. We check the hinge alignment first, because a sagging gate leaf is the most common cause of a motor that trips its breaker. Then we go through the operator: limit switches, control board, and the chain or belt drive if it’s a slide gate. Maplewood’s wet climate means we pay extra attention to corrosion on exposed brackets and the wiring connections inside the motor housing. Every repair gets a written price before any work starts, and the fix carries a written guarantee good for a full year.
Gate Installation in Maplewood
For a full Gate Installation in Maplewood, we start with a site measure and a written quote before anything is ordered. That quote covers the gate itself, the operator, the posts or pillars, and the electrical run if power needs to be pulled. Maplewood soil tends to hold water through the spring, so we pour deeper footings than the bare minimum on any gate wider than ten feet. We also check the swing path against the driveway grade, because a gate that drags on the uphill side will eat operators. The written price is the price you pay, with no add-ons at the door.
Gate Motor Repair in Maplewood
When the gate leaf is sound but the operator won’t move it, that’s a Gate Motor Repair in Maplewood job. We work on FAAC, BFT, Linear, and Viking operators, among others, and we match the replacement parts to the brand already mounted on the post. In Maplewood we see a lot of control boards that have taken on moisture through a cracked housing seal, and limit switches that have corroded from condensation inside the cover. We diagnose the motor, explain what failed in plain terms, and give you a written price before we swap anything. The repair is covered by our 365-Day Done Right Promise.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Maplewood
Our technicians are trained on the gate motors Maplewood homes actually have. We service FAAC and BFT swing operators, Linear slide operators, and Viking gate systems. Parts for these brands are stocked in our local vans, which means most motor repairs in Maplewood are completed in a single visit. See the full list on our brands page.
Pricing for Gate Company in Maplewood, WA
These are the ranges we typically quote for gate work in Maplewood. The final number depends on what we find when we open the operator and check the gate itself.
| Service | Typical range in Maplewood |
|---|---|
| Diagnostic call (credited toward repair if you proceed) | $49 – $89 |
| Hinge replacement (standard pair) | $180 – $340 |
| Wheel or roller replacement (slide gate) | $150 – $280 |
| Limit switch adjustment or replacement | $110 – $220 |
| Control board replacement | $280 – $520 |
| Gate motor replacement (swing) | $650 – $1,150 |
| Gate motor replacement (slide) | $800 – $1,400 |
| Full swing gate installation (single, up to 12 ft) | $2,800 – $5,200 |
| Full slide gate installation (single, up to 16 ft) | $3,500 – $6,500 |
| Keypad or intercom installation | $320 – $580 |
In Maplewood, the two things that push a repair toward the top of the range are corrosion that requires grinding off old hardware, and gates that have been out of alignment long enough to damage the operator’s internal gearing. Whatever we quote is the number you approve before any work starts, and it’s the number on the invoice.
Neighborhoods We Serve in Maplewood
We run gate service across all of Maplewood and the surrounding area. Our typical response time for a Maplewood address is same-day for emergency gate failures and 24 to 48 hours for scheduled work, depending on parts availability. The neighborhoods below represent the areas we visit most often, but if yours isn’t listed, call and ask.
- Maplewood Heights
- Lower Maplewood
- Maplewood Terrace
- North Maplewood
- Maplewood Estates
Service Area – Cities Near Maplewood
While this page covers Maplewood, our crews also serve the wider region. If you’re in Seattle, WA or Spokane, WA, we can route a technician from the nearest dispatch point. We also handle gate work in Tacoma, WA and Vancouver, WA. Scheduling is coordinated from our Seattle office, and the same written-price guarantee applies everywhere we work.
Serving Maplewood, WA – Our Local Coverage Area
We’re based in the Maplewood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Maplewood
For a gate that’s stuck open or stuck closed, we aim for same-day service in Maplewood. Scheduled maintenance or non-emergency installation measures run 24 to 48 hours out. Call (469) 530-2485 and the person who answers can give you a real arrival window, not a guess.
For repairs, almost never. For a full installation or a new gate at the street, some Maplewood properties fall under HOA architectural rules or county setback requirements. We’ll flag what applies on your property during the measure, and we’ll work from the approved plan before we pour or mount anything.
We cover all of Maplewood plus the surrounding communities. As long as the address is within our dispatch zone, the same written price and 365-Day Done Right Promise applies. If you’re on the edge of the service area, call and we’ll tell you straight whether we can get a crew to you.
If your gate isn’t working the way it should, call Carver Gate Repair at (469) 530-2485. A live person answers, we’ll give you a straight price, and the work is guaranteed in writing for a full year.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Maplewood Customers Say
"Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.