Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Old Fig Garden, CA
Gate repair in Old Fig Garden, CA usually runs between $180 and $380 for common fixes like hinge realignment or a failed limit switch, while a full gate motor replacement typically lands between $850 and $1,900 depending on the operator and access. Old Fig Garden is an unincorporated pocket of Fresno County wrapped almost entirely by the city of Fresno, and its homes skew older with larger lots and established landscaping. That combination means gate systems here are often retrofit installations on posts that have settled over decades, and our crews schedule Old Fig Garden work around those realities from the first visit. If your gate is stuck or making noise, call (469) 530-2485 and we will give you a straight answer.
Why Old Fig Garden Homes Are Different
Old Fig Garden is not a standard subdivision. The neighborhood was built mainly between the 1920s and 1950s, and many properties still have original or early-generation fencing and gate framing. What that means in the field is this: posts lean, concrete pads crack, and swing gates that once cleared the ground now scrape against soil that has built up over sixty or seventy years of irrigation.
Summers are hot. The Fresno area regularly pushes past 100 degrees through July and August, and electronic components inside gate operators fail faster in that heat, especially when the operator box sits in direct sun. Capacitors swell, circuit boards crack solder joints, and limit switches drift. Those are the exact problems our technicians see most on Old Fig Garden service calls.
Also relevant: Old Fig Garden has no homeowners association with uniform gate rules, but Fresno County does enforce setback and right-of-way clearance on any gate facing a public road. If a gate swings outward over a sidewalk or easement, that is a permit conversation before any install work begins. We walk each Old Fig Garden job through that check so the gate does not get flagged after it is already in the ground.
Our Main Old Fig Garden Services
Most Old Fig Garden homeowners reach out about one of two things: a gate that no longer opens reliably, or a gate they want replaced with something better suited to the property. Each service has its own page with full pricing and detail.
Gate Repair in Old Fig Garden
Most Old Fig Garden repair calls involve gates that sag, drag, or refuse to close squarely. That is almost always a hinge, post, or wheel-track problem rather than a motor problem. Our technicians work through a written checklist on site: they inspect the hinges and post anchors, check the gate’s throw and clearance, test any locks or drop rods, and only then look at automation. On older Old Fig Garden properties we regularly find the original gate was hung on wood posts that have since twisted, and the fix is reframing rather than adjusting. Full detail, including what a typical repair costs in this area, is on the Gate Repair in Old Fig Garden page.
Gate Installation in Old Fig Garden
Installing a new gate in Old Fig Garden is rarely a like-for-like swap. Older properties often have non-standard openings, so new gates are built or cut to fit the existing set-back rather than forcing a stock panel into place. We measure the opening, check hinge-post depth, confirm ground clearance, and quote a written price that includes the gate, hardware, concrete work if needed, and any electrical run for future automation. Before any work starts, we also confirm the gate’s swing direction against the county right-of-way rules that apply in this neighborhood. See the Gate Installation in Old Fig Garden page for pricing and a full scope breakdown.
Gate Motor Repair in Old Fig Garden
When a gate still moves by hand but will not respond to a remote, keypad, or vehicle sensor, the issue is in the operator or its controls. In Old Fig Garden, the heat is the usual aggravator: sun-exposed circuit boards and aging capacitors fail earlier here than in coastal climates. Our technicians carry boards, remotes, receivers, and limit switches for nine major gate-motor brands, so a second visit for a part is usually avoidable. We diagnose the operator, test the safety inputs, and quote the repair in writing before any part is replaced. The Gate Motor Repair in Old Fig Garden page has the full cost ranges.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Old Fig Garden
We service and stock parts for FAAC, BFT, Linear, and Viking operators, among the five other brands we support. Parts for the common FAAC and Linear boards used in the Central Valley are kept in local inventory, so most Old Fig Garden motor repairs are completed on the first trip. For less common failures, we tell you the exact part lead time before we leave the property. See our brands for the full list of equipment we work on.
Pricing for Gate Company in Old Fig Garden, CA
| Service | Typical range in Old Fig Garden |
|---|---|
| Gate repair, on site | $180 – $380 |
| Hinge replacement or realignment | $150 – $400 |
| Wheel and track alignment | $180 – $350 |
| Gate motor repair | $200 – $450 |
| Circuit board replacement | $250 – $550 |
| Limit switch replacement | $150 – $300 |
| Remote or keypad programming | $100 – $200 |
| Gate motor replacement | $850 – $1,900 |
| New gate installation (manual) | $1,200 – $3,500 |
| New gate installation (automated) | $2,800 – $7,500 |
The numbers above move higher in Old Fig Garden when a job involves a badly settled post, heavy ornamental steel, or an operator that has to be sourced from a distributor outside the area. The number you are quoted is the number you pay. Written price first, no moving number at the door.
Neighborhoods We Serve in Old Fig Garden
Old Fig Garden is small enough that we treat the entire community as one service area, and we schedule calls here almost every week. Crews typically reach any address in the neighborhood the same day or next morning, depending on when you call.
- Old Fig Garden proper
- The streets east of Maroa Avenue
- The blocks off Van Ness Boulevard
- Areas bordering Bullard Avenue
- Homes near the Fig Garden Loop
Service Area – Cities Near Old Fig Garden
We serve Old Fig Garden as part of our broader California coverage. Our offices and dispatch run from Fresno’s Central Valley location, and we answer calls for gate work across the state. If you own property outside this neighborhood, we also serve Los Angeles, CA, San Diego, CA, San Jose, CA, and San Francisco, CA.
Serving Old Fig Garden, CA – Our Local Coverage Area
We’re based in the Old Fig Garden area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Old Fig Garden
Most Old Fig Garden calls are scheduled the same day or the next morning. Because dispatch runs from the Fresno Central Valley office, we keep Old Fig Garden on the regular route board rather than treating it as an outlying area. Call (469) 530-2485 and a live person will give you the next available window, not a voicemail.
It depends on the gate’s height, location, and swing direction. Gates over seven feet and any gate swinging over a public right-of-way or sidewalk generally need Fresno County review. We check setback and clearance on every Old Fig Garden installation before work begins so the finished gate does not create a compliance problem.
Every repair we perform in Old Fig Garden carries a written 365-day guarantee. If the same failure returns inside that year, we come back and fix it at no charge. The guarantee is in writing on every job, and a second visit for a covered failure is free, no argument.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Old Fig Garden Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.