Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in SeaTac, WA
Gate repair in SeaTac comes down to two things: heavy rainfall and gates that get used more than almost anywhere else in the metro. SeaTac sits directly under the airport flight paths, so many homeowners install security gates and driveway gates to cut noise and unwanted traffic. That means swing openers, slide operators, and access keypads accumulate wear through wet, cold months and near-constant cycling. We’re Carver Gate Repair, and we run every SeaTac job to the Garrison Standard: a written price before work starts, a background-checked technician in uniform, and a written one-year guarantee on every repair. Call (469) 530-2485 and you’ll speak with a live person, any hour.
Why SeaTac Homes Are Different
SeaTac’s housing stock spans mid-century ramblers, newer townhome clusters, and small-acreage properties along the eastern slope toward Angle Lake. Driveway gates here tend to be surface-mounted slide operators or chain-driven swing arms rather than high-end hydraulic kits, and they see real rainfall from October through May. Water intrusion into limit switches, loop detectors, and photo-eye housings is the most common failure we see in SeaTac, especially on gates that face west into incoming weather off Puget Sound. In neighborhoods near Tyee Valley and along International Boulevard, soil movement from saturated clay can also shift gate posts over time, throwing off alignment enough to bind a gate mid-cycle.
SeaTac also sits in unincorporated King County for many parcels, which means some gate installations trigger county permitting review rather than city-level approval. It’s not always required, but when it is, the process adds a few days before any post concrete goes in. We flag that early so nobody loses time.
Our Main SeaTac Services
The two calls we get most from SeaTac homeowners are a gate that won’t open or close reliably, and a motor that runs but no longer moves the gate. Each service has its own page with pricing and process details for SeaTac work.
Gate Repair in SeaTac
Gate repair in SeaTac usually means one of three things: a gate that’s fallen out of alignment, a hinge or roller that’s failed under constant use, or a keypad and receiver that’s stopped responding. We arrive, diagnose the exact failure, and hand you a written price before we touch anything. On swing gates near Bow Lake and the residential streets off South 188th, we often find the issue is post movement rather than hardware failure, which changes the fix. If your gate is hard to move by hand or dragging on one side, see Gate Repair in SeaTac for what’s involved.
Gate Installation in SeaTac
New gate installations in SeaTac start with the driveway itself. Slope, drainage, and gate width dictate whether a swing or slide design makes sense. On narrower lots in the neighborhoods around SeaTac Community Center, a single swing leaf is often the cleanest fit; on wider driveways along Des Moines Memorial Drive, a slide gate can save space and hold up better against wind. Every SeaTac installation includes a measured site visit, a written proposal with the full price, and a start date you sign off on. Details are on the Gate Installation in SeaTac page.
Gate Motor Repair in SeaTac
Motor work is the most weather-sensitive repair we do in SeaTac. Rain and condensation work their way into control boards and transformer housings over time, especially on operators installed without a weather hood. We open the unit, test the limit switch and capacitor circuits, and identify whether the motor or the board is the failure point. On gates along South 200th Street and near Angle Lake, we’ve seen salt-adjacent air from winter road treatment corrode terminals faster than expected. For what a motor repair or replacement costs, see Gate Motor Repair in SeaTac.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in SeaTac
We stock common parts for Viking, Ghost Controls, DoorKing, and Elite operators on our local trucks, so SeaTac calls don’t wait on a parts shipment for routine failures. View the full list on our brands page.
Pricing for Gate Company in SeaTac, WA
| Service | Typical range in SeaTac |
|---|---|
| Gate repair service call | $75 – $150 |
| Hinge replacement (standard) | $85 – $200 per hinge |
| Roller replacement | $75 – $180 per roller |
| Gate realignment | $120 – $300 |
| Keypad or remote programming | $65 – $130 |
| Gate opener board replacement | $280 – $550 |
| Loop detector replacement | $180 – $400 |
| Swing arm operator replacement | $900 – $2,100 |
| Full gate installation (single swing) | $2,800 – $6,500 |
| Full gate installation (slide) | $4,000 – $9,500 |
SeaTac prices run slightly higher than inland metro areas because wet-season repairs often mean replacing corroded hardware, not just adjusting it. Every job gets a written price before work starts, and that number does not move at the door.
Neighborhoods We Serve in SeaTac
We run calls across SeaTac most days, and our typical response for gate repair is same-day or next-day depending on when you call. The neighborhoods below are a representative sample, not the boundary:
- Angle Lake
- Bow Lake
- Tyee Valley
- McMicken Heights
- SeaTac City Center
Service Area – Cities Near SeaTac
Beyond SeaTac, our crews cover the wider Puget Sound region. Homeowners looking for gate work in nearby cities can find local pages for Seattle, WA, Tacoma, WA, Vancouver, WA, and Spokane, WA. Dispatch and scheduling are coordinated from the brand’s Seattle office, with crews serving SeaTac locally.
Serving SeaTac, WA – Our Local Coverage Area
We’re based in the SeaTac area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in SeaTac
Most SeaTac gate repair calls are scheduled same-day or next-day. If your gate is stuck open or won’t close, call (469) 530-2485 and a live person will give you the next available window right then. We don’t route to voicemail.
Some SeaTac parcels, particularly in unincorporated King County pockets, do require a permit for new gate installations. Repairs almost never do. We check the parcel before we quote so you’re not surprised by a county requirement.
Yes. Every SeaTac job, from a hinge replacement to a full gate installation, gets a written price before any work starts. The written guarantee is good for a full year, and if the repair fails inside that window, the second visit is free. Call (469) 530-2485 to set up an estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What SeaTac Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.