Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Tiburon, CA
Carver Gate Repair is a gate company serving Tiburon, CA, and we handle the full range of gate work: repair, installation, and motor systems. Tiburon’s hillside lots, older estate gates, and salt air from Richardson Bay create a specific set of failures we see more often here than anywhere else in Marin. Call (469) 530-2485 and a live person answers, day or night. We quote a written price before any work begins, and every repair carries a written one-year guarantee.
Why Tiburon Homes Are Different
Tiburon’s housing stock skews older and larger. Many homes along Paradise Drive, Belveron Gardens, and the Ridgeline neighborhoods near Ring Mountain were built between the 1960s and 1980s, which means original gate hardware is now 40 to 60 years old. Steel posts corrode in the marine air; hinge welds fatigue; swing operators that were installed when the house was built are now obsolete. Marin County’s coastal fog keeps moisture on metal longer than inland areas, so a gate that looks fine from the street often has rust working at the hinge barrels and striker plates.
The terrain matters too. Many Tiburon driveways climb at steep grades, which changes how a gate must be hung. A swing gate on a 12 percent slope needs different hinges than one on flat ground. Underground loop detectors, which tell an automatic gate when a car is present, can be tricky to tune on sloped driveways where a vehicle approaches at an angle. And because much of Tiburon sits within unincorporated Marin or under strict HOA design review, gate modifications sometimes require approval before work starts. We know which questions to ask, and we’ll walk you through it plainly.
Our Main Tiburon Services
Most Tiburon homeowners call us for one of two things: a gate that has stopped working, or a new gate to replace one that’s finally beyond repair. Here are the three services we provide throughout Tiburon, each with its own dedicated page.
Gate Repair in Tiburon
When a gate in Tiburon stops opening, the cause is usually mechanical before it’s electrical. We find bent hinge posts from years of wind load, rusted rollers on sliding gates, and damaged limit switches on older operators. Our process is straightforward: we diagnose the failure, hand you a written price, and complete the work on the spot in most cases. If your gate is rusted through at the bottom rail, which happens faster near the waterfront, we’ll tell you honestly whether repair makes sense or replacement is the better spend. Gate Repair in Tiburon
Gate Installation in Tiburon
A new gate in Tiburon has to be measured, built or ordered, and installed to handle the slope and weather. We install steel, aluminum, and wood gates, and we set posts in concrete at the proper depth for Marin’s soil conditions. Every installation starts with a free on-site measure and a written scope of work, so you know the full cost before anything is ordered. Lead times vary, but we schedule the install date before materials are cut. Gate Installation in Tiburon
Gate Motor Repair in Tiburon
Tiburon’s combination of salt air and steep driveways is hard on automatic gate operators. We repair swing and slide operators across nine motor brands, from surface-mount FAAC units to underground BFT and Linear systems that many Marin installers won’t touch. A motor that hums but won’t move is often a capacitor or limit switch, not a full replacement. We diagnose first, quote the fix in writing, and only replace the motor when repair isn’t economical. Gate Motor Repair in Tiburon
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Tiburon
We service FAAC, BFT, Linear, and Viking gate operators, among others, and we keep common replacement parts stocked for the systems most often installed in Tiburon. That means most motor repairs don’t wait on a parts order. For the full list of what we work on, see our brands.
Pricing for Gate Company in Tiburon, CA
| Service | Typical range in Tiburon |
|---|---|
| Gate repair service call | $95 – $195 |
| Hinge replacement (steel gate) | $225 – $485 |
| Post reset or reinforcement | $350 – $800 |
| Limit switch replacement | $165 – $310 |
| Circuit board repair | $240 – $520 |
| Swing arm operator replacement | $650 – $1,400 |
| Slide gate operator replacement | $900 – $1,900 |
| New steel gate, single swing | $2,200 – $5,500 |
| New aluminum gate, single drive | $2,800 – $6,500 |
| Full gate and motor package | $4,200 – $9,500 |
What pushes a Tiburon job toward the top of those ranges is usually access and rust. A gate at the bottom of a long, narrow driveway takes longer to work on. A post that’s rusted through below grade needs to be dug out and re-set in concrete, not just welded. Whatever the job, the price we quote in writing before the work starts is the price you pay. Nothing moves at the door.
Neighborhoods We Serve in Tiburon
We work throughout Tiburon and respond fastest to the neighborhoods below because of how our crews route through Marin. Typical response for repairs is same-day or next-day depending on the hour you call.
- Paradise Drive
- Belveron Gardens
- Ring Mountain area
- Tiburon Ridge
- Old Tiburon
Service Area – Cities Near Tiburon
We get calls from Tiburon homeowners whose gates control vacation rentals or second properties, and we coordinate from our Bay Area office for jobs across the region. If you also have property outside Tiburon, we serve San Francisco, CA, San Jose, CA, San Diego, CA, and Los Angeles, CA under the same Garrison Standard. Same written price, same one-year guarantee.
Serving Tiburon, CA – Our Local Coverage Area
We’re based in the Tiburon area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Tiburon
Same-day is common if you call before noon, and next-day is the norm after that. Tiburon is central to our Marin routing, so our technicians are usually within 30 minutes of the peninsula. Emergencies where a gate is stuck open, which is a real security problem for a home, get priority.
Most direct replacements of an existing gate and operator do not require a Marin County building permit. New installations, especially anything that changes the driveway entry or includes new electrical runs, may require planning or HOA review first. We’ll tell you before any work starts. Call (469) 530-2485 for specifics.
Yes. We cover all Tiburon ZIP codes, including homes on the ridge, along Paradise Drive, and in the Belveron area. We also cross the freeway to nearby Marin cities when the job requires it. One phone number reaches a person every time: (469) 530-2485.
If you need a gate looked at in Tiburon, call (469) 530-2485. A live person answers, we schedule a time that works, and the price is in writing before the first tool comes out.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tiburon Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K.