Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Waller, WA
Gate work in Waller comes down to one thing most of the time: a gate that has to hold up to wet, heavy ground and a motor that has to keep working through it. We’re Carver Gate Repair, and we run every Waller job to The Garrison Standard: a written price before any work starts, background-checked technicians, and a written guarantee on every repair for a full year. When a homeowner calls us about a gate that won’t open or a sagging post, they get a live person on the phone, not a voicemail. Call (469) 530-2485 and you’ll talk to someone who knows gates.
Why Waller Homes Are Different
Waller sits in south Pierce County where the ground stays soft through a long wet season, and that shows up in gate work more than most people expect. Gate posts set in clay-heavy soil shift when the ground saturates, which changes the catch alignment and puts extra load on the hinge side. We see it on nearly every property with a driveway gate: a gate that worked fine in August starts latching hard by December. The fix is usually a post reset or a hinge adjustment, but it has to be done with the soil in mind or it comes back the next season.
The housing stock here trends toward larger rural and semi-rural lots, many of them on private drives off 52nd Avenue E or Waller Road E. That means a lot of long driveways, a lot of privacy gates, and a lot of homeowners who need a gate that actually keeps livestock in or keeps uninvited vehicles out. It also means the gate operator is doing more cycles than a suburban gate ever would, which is why we pay close attention to motor duty cycle when we spec a replacement. Pierce County doesn’t require a permit for most gate repairs, but a new installation that includes an electrical run to the operator will need a permit and a licensed electrical contractor on that portion of the job. We handle the gate; we coordinate the rest.
Our Main Waller Services
Most calls from Waller fall into two buckets: a gate that won’t open or close properly, and a motor that quit without warning. Each service has its own Waller page linked below so you can get the full detail on what a given job involves.
Gate Repair in Waller
When a gate in Waller stops latching or starts dragging on the ground, the cause is usually one of three things: a shifted post from saturated soil, a bent hinge from the gate being forced past its stop, or a damaged catch. We show up with the gate hardware in the truck, correct the alignment, and replace what’s worn. On properties along the busier stretches of Waller Road E, we also check that the gate won’t swing into the travel lane when it’s opened. Read the full breakdown on Gate Repair in Waller.
Gate Installation in Waller
A new gate in Waller means a site assessment first, because the wet-season ground here demands a deeper post setting than you’d use on drier eastern Washington soil. We measure the drive opening, check the swing path for grade changes, and write a firm price before ordering anything. Most Waller installs are steel or aluminum driveway gates with a pedestrian gate alongside; we quote both the gate and the operator work separately so you see exactly what you’re paying for. Details are on Gate Installation in Waller.
Gate Motor Repair in Waller
Gate motors in Waller fail most often because of moisture getting into the control board or limit switch, especially on older swing operators that were never fully sealed. We open the operator, diagnose the fault on site, and replace only what’s failed: limit switch, control board, capacitor, or gear set. If you have a FAAC or BFT swing operator, we carry the common parts so we’re not waiting a week on a ground shipment. See the full scope at Gate Motor Repair in Waller.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Waller
We work on nine gate-motor brands, and the ones we see most often in Waller are FAAC, BFT, and Linear on swing gates, with Viking on the occasional slide gate. Common boards, limit switches, and remotes are stocked locally so most motor repairs finish in one visit. See our brands page for the full list.
Pricing for Gate Company in Waller, WA
| Service | Typical range in Waller |
|---|---|
| Gate repair, minor (latch, hinge, strike alignment) | $145 – $310 |
| Gate repair, post reset / realignment | $260 – $485 |
| Gate repair, weld and straighten (on-site) | $180 – $420 |
| Gate motor diagnosis and minor repair | $150 – $340 |
| Gate motor board replacement | $260 – $550 |
| Swing gate motor replacement | $680 – $1,260 |
| Slide gate motor replacement | $820 – $1,515 |
| Gate installation, single swing (standard steel) | $1,890 – $3,760 |
| Gate installation, double swing (standard steel) | $3,420 – $5,890 |
| Operator add-on to existing gate | $920 – $1,980 |
| Keypad / intercom / loop detector add-on | $240 – $620 |
| Annual maintenance visit | $120 – $230 |
Two things push price upward in Waller: posts that need to be pulled and re-set deeper because of the wet season soil movement, and long driveway runs that require extra footage of wire or conduit for the operator. Whatever the number is, it’s in writing before we touch the gate, and it doesn’t change at the door.
Neighborhoods We Serve in Waller
We cover the entire Waller area, including the rural-drive properties that most gate companies don’t want to drive to. Our response time for most repair calls in Waller is same-day or next-day depending on the season and parts availability.
- Waller Road E corridor
- 52nd Avenue E area
- Puyallup river bottom properties
- McCutcheon Road area
- Meridian E frontage lots
Service Area – Cities Near Waller
Our crews serve Waller locally, with dispatch and scheduling coordinated from the brand’s Seattle office. If you’re in a neighboring area, we also cover Seattle, WA, Spokane, WA, Tacoma, WA, and Vancouver, WA.
Serving Waller, WA – Our Local Coverage Area
We’re based in the Waller area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Waller
Most Waller repair calls get a same-day or next-day appointment. Motor repairs that need a board we don’t have on the truck may take an extra day for the part to arrive. Call (469) 530-2485 and we’ll give you a real arrival window, not a four-hour guess.
Most gate repairs don’t require one. A new installation with a new electrical run to the operator usually does, and that portion has to be done by a licensed electrical contractor. We’ll tell you what applies to your property before any work begins.
Every repair we do carries a written guarantee good for a full year from the date of service. If the same repair fails inside that window, the second visit is free. No charge, no argument. That’s The Garrison Standard, and it’s in writing on every job.
For a written price and a straight answer about your gate, call Carver Gate Repair at (469) 530-2485. A live person answers, 24/7.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Waller Customers Say
"Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.