Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in San Leon, TX
Carver Gate Repair handles gate work across San Leon, TX with one consistent approach: a written price before the job starts, a background-checked technician on site, and a guarantee in writing on every repair. Our crews work on swing gates, slide gates, and the motor systems that run them, and we cover neighborhoods from the waterfront streets near Galveston Bay back to the inland lots off FM 517. Call (469) 530-2485 when a gate stops cooperating and you want the problem fixed once.
Why San Leon Homes Are Different
San Leon sits on the Bolivar Peninsula side of Galveston Bay, and the salt air does not take a day off. Metal gates, hinges, and motor housings corrode faster here than they do twenty miles inland, so hardware that looks fine from a distance is often rusted through at the weld points. We regularly replace hinge posts and gate frames in San Leon that would still have years of life in a drier climate. That means a straightforward gate repair here sometimes includes cutting out corroded steel and welding in a new section, not just swapping a part.
The housing stock is a mix of older bay cabins, mid-century ranch homes, and newer elevated builds, so gate sizes and mounting surfaces vary widely. Some gates hang from wood posts that have gone soft from decades of humidity, and the first thing we check in San Leon is whether the post itself can still hold the gate. Driveway layouts on narrow lots off 9th Street and along Bayshore Drive often mean a slide gate makes more sense than a swing gate, because there is not enough room to swing an arm without clipping a car or a fence line.
Our Main San Leon Services
Most San Leon homeowners call us for two things: a gate that will not open or close properly, and a motor that has stopped responding to the remote or keypad. Each of these has its own dedicated San Leon page below with pricing and detail.
Gate Repair in San Leon
A leaning gate in San Leon usually has a structural problem, not just a loose hinge. We inspect the post, the frame, the welds, and the hardware before touching anything, then we give you a written price for the repair. Salt corrosion on hinge bearings and latch hardware is the most common failure we see on bay-side properties, and we stock replacements that hold up better to the coastal air. Gate Repair in San Leon covers what we fix, what it costs, and how fast we can get there.
Gate Installation in San Leon
New gate installation in San Leon means matching the gate to the driveway, not just dropping a panel between two posts. We measure the opening, check the soil and the post footing, and recommend either a swing or slide configuration based on the space you actually have. For driveways that slope toward the street or sit on soft bay clay, we often recommend deeper post footings than a standard install, because a gate that settles two inches in the first year becomes a gate that drags. Gate Installation in San Leon walks through the process and the price ranges for new gate builds.
Gate Motor Repair in San Leon
When a gate motor quits in San Leon, the culprit is usually moisture intrusion, a failed limit switch, or a control board that has been cooked by the heat and damp. We open the motor housing, diagnose the fault, and show you what failed before we quote a repair. Our technicians work on LiftMaster, Viking, FAAC, and BFT operator systems, and we keep common boards, limit switches, and photo eyes on the truck so most motor repairs in San Leon happen in one visit. Gate Motor Repair in San Leon has the full breakdown of motor troubleshooting and replacement costs.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in San Leon
Our technicians work across the gate motor brands most common in San Leon, including LiftMaster, FAAC, BFT, Linear, and Viking. Because we stock parts for these systems, we are not waiting on a distributor to ship a board from out of state. See our brands for the full list of systems we service and repair.
Pricing for Gate Company in San Leon, TX
| Service | Typical range in San Leon |
|---|---|
| Gate repair, basic hardware | $145 – $315 |
| Gate repair, structural (post replacement, weld work) | $385 – $850 |
| Gate motor repair | $225 – $490 |
| Gate motor replacement | $640 – $1,550 |
| Control board replacement | $240 – $520 |
| Limit switch replacement | $110 – $225 |
| Keypad replacement or reprogramming | $95 – $210 |
| Photo eye alignment or replacement | $85 – $185 |
| Full gate installation (single swing) | $2,200 – $4,800 |
| Full gate installation (slide gate) | $3,400 – $7,200 |
Salt corrosion and post condition are the two biggest price movers in San Leon. A gate that needs hinge brackets replaced is one number; a gate that needs a post dug out and reset because the bay air ate through the base is a different job. Every price is written down and handed to you before any work begins, so the number you agree to is the number you pay.
Neighborhoods We Serve in San Leon
We run calls across the full San Leon area, from the waterfront streets along Bayshore Drive to the inland roads off FM 517. Our response for gate repairs in San Leon is typically same-day or next-day, depending on the call time and the nature of the job. Common areas we serve include:
- Bayshore Drive corridor
- 9th Street area
- 10th Street to 15th Street blocks
- FM 517 corridor
- Waterfront lots near Galveston Bay
Service Area – Cities Near San Leon
While our San Leon crews cover the local market full-time, Carver Gate Repair also serves major metros across Texas and Florida. Homeowners near Houston, TX, San Antonio, FL, Dallas, TX, and Fort Worth, TX can reach the same live-person phone line and the same written guarantee.
Serving San Leon, TX – Our Local Coverage Area
We’re based in the San Leon area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Leon
For most gate repairs in San Leon, we can have a technician on site the same day or the next day. Calls are answered by a live person 24/7, not a voicemail box, so you will know when your technician is coming before you hang up. Call (469) 530-2485 and we will give you a real arrival window.
Permit requirements in San Leon depend on the scope of the work and the location of the property. A basic hardware repair generally does not need a permit, but new gate installations with new footings sometimes do. We can tell you what is required for your specific job when we come out to measure.
Yes. Waterfront gates in San Leon need hardware and coatings that hold up to salt air, and we factor that in when we recommend materials. A gate that is constantly exposed to bay spray will need different hinge hardware than one set back from the water, and we quote accordingly.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Leon Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.