Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Houston, TX
Carver Gate Repair is a dedicated gate company serving Houston, TX, focused exclusively on gate repair, gate installation, and gate motor repair. Most of the gates we work on in Houston are steel or wrought-iron driveway gates on concrete slabs, exposed to heavy humidity, clay soil movement, and the occasional tropical storm force wind. That combination is hard on hinges, posts, and motor electronics, and it changes how we diagnose and fix problems compared with drier markets. If your gate is stuck, sagging, or making a grinding sound, call us at (469) 530-2485 and a live person will answer, day or night.
Why Houston Homes Are Different
Houston’s soil is the biggest factor most homeowners don’t see until a gate stops latching. The city sits on expansive clay that swells after rain and shrinks during dry stretches. Over a few seasons, that movement can shift gate posts enough to throw off the latch alignment or bind the hinges. Gates that worked fine in May will suddenly drag or refuse to close in August, and the fix usually starts with the post, not the motor.
Humidity and salt-laden air from the Gulf add another layer of wear. We regularly see control boards corroded by condensation, limit switches fouled by moisture, and steel gates with rust starting at the weld points. Homes in older Houston neighborhoods like Meyerland, Timbergrove, and Sharpstown tend to have gates that were installed 10 to 20 years ago, often on operators that are no longer made. Newer subdivisions out toward Katy and Cypress put in lighter aluminum gates with modern operators, but they still deal with soil shift and the same 60-plus inches of annual rain. The Gate Motor Repair page covers what fails most often on each brand.
Permitting is also different here. The City of Houston generally allows gate repair without a permit when you’re replacing hardware or a motor in kind. A full gate installation that changes the footprint or adds an operator loop usually requires a permit and must meet setback rules, especially on corner lots in neighborhoods with deed restrictions. We handle that paperwork as part of the installation scope, and we’ll tell you before we start whether a permit applies to your job.
Our Main Houston Services
Three services account for nearly every call we take in Houston. Each one has its own page here, because the scope, price, and timeline are different enough to deserve separate detail.
Gate Repair in Houston
Most Houston gate repairs come down to one of three things: a post that’s moved, a hinge or weld that’s failed, or an operator that’s working against the gate instead of with it. We square the post, re-hang the gate, and set the travel limits so the motor stops straining. In Houston, we also check for rust at the bottom rail, where standing water from heavy rain does the most damage. If your gate hangs low on the latch side or jerks halfway through its travel, start with Gate Repair in Houston.
Gate Installation in Houston
A new gate in Houston needs a foundation that can handle clay movement, which usually means deeper post footings than a bill of materials alone would suggest. We build the steel frame, hang it with adjustable hinges, and set the operator so the gate can’t slam in the wind. We also account for Houston’s front-yard drainage patterns, because a gate that sits in water after every storm will rust from the bottom up. For a full breakdown of materials, timelines, and what’s included, see Gate Installation in Houston.
Gate Motor Repair in Houston
Motor repair in Houston often involves a control board that’s been cooked by lightning or humidity, or a limit switch that’s been knocked out of adjustment by a gate that briefly bound against a shifted post. We rebuild swing arms, replace loop detectors, and reprogram operators on brands like LiftMaster, FAAC, and DoorKing. The fix is usually same-day once we’re on site. What we find on most Houston calls is documented on the Gate Motor Repair in Houston page.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Houston
We service the operators most common on Houston homes: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our Houston dispatch keeps common boards, arms, and limit switches for these brands in local stock, which usually means one trip instead of two. Details are on our brands page.
Pricing for Gate Company in Houston, TX
| Service | Typical range in Houston |
|---|---|
| Gate repair (minor: hinge, latch, realignment) | $180 – $420 |
| Gate repair (major: weld, post reset, heavy steel) | $550 – $1,500 |
| Gate operator / motor repair | $250 – $650 |
| Gate motor replacement | $800 – $2,200 |
| Full gate installation (steel, driveway-size) | $3,500 – $9,500 |
| Full gate installation (aluminum, driveway-size) | $2,800 – $7,500 |
| Gate automation upgrade (operator + arms + loops) | $2,500 – $6,000 |
| Loop detector replacement | $350 – $900 |
| Limit switch replacement | $200 – $450 |
| Gate track or roller replacement (sliding gates) | $400 – $1,100 |
What pushes a Houston job to the higher end is usually the post. If a post has floated out of plumb and has to be dug out and re-set in fresh concrete, the material and time add to the ticket, especially in the summer when the ground is dry and hard. The lower number assumes standard hardware on a gate that’s still structurally square. Whatever the number, it’s written down and agreed before we touch anything, and nothing changes when the job is open.
Neighborhoods We Serve in Houston
Our Houston crews run calls across the metro every day, from the older lots inside the Loop to the larger gated properties out toward the Beltway and beyond. We keep our routing tight in the morning so afternoon calls stay predictable. Typical response for a gate repair in Houston is same-day or next-day, depending on the time of the call.
- Meyerland
- Timbergrove
- Sharpstown
- Heights
- Clear Lake
Service Area – Cities Near Houston
We work beyond Houston’s city limits on the same schedule and with the same guarantee. That includes Galena Park, TX, Channelview, TX, and South Houston, TX to the east and south, plus Pasadena, CA for our West Coast customers. If you’re near the Harris County line and not sure whether you’re in our service area, call and we’ll tell you straight.
Serving Houston, TX – Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Houston
Most Houston calls get same-day or next-day service. If your gate is stuck open or won’t close, tell the dispatcher when you call and we’ll treat it as a priority. Our Houston scheduling runs seven days a week, and a live person answers the phone at (469) 530-2485.
Repairs and motor replacements usually don’t need a permit. New installations and automation work often do, and many Houston HOAs require approval before the first hole is dug. We’ll tell you which applies to your job and handle the paperwork we can before dispatch.
We cover the full Houston metro, including the neighborhoods listed above and the surrounding cities on our service area list. If you’re inside Harris County or just across the county line, call us at (469) 530-2485 and we’ll give you a straight answer on coverage and a free estimate for the work.
If your gate is giving you trouble in Houston, call Carver Gate Repair at (469) 530-2485. A live person answers around the clock, and every repair comes with a written price before the work starts and a written one-year guarantee when it’s done. Lonnie Burke leads our Houston operation, and the crew shows up uniformed, background-checked, and ready to work. Estimates are free, and you’ll know the number before we lift a tool.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Houston Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.