Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Houston, CA | Carver Gate Repair
We provide independent Ghost Controls Gate Repair in Houston, with technicians who carry OEM-compatible parts for the TSS1, TDS2, and APT series operators. The one thing that makes our Ghost Controls work here different is how we account for Houston’s hard water and mineral-heavy soil, which corrodes limit switches and seizes articulating arms faster than almost anywhere else in the region. Call us at (469) 530-2485 for a free estimate, or read on to see what we’re seeing in the field.
Why Houston Residents Choose Us for Ghost Controls Service
We’ve been working on Ghost Controls systems since the brand started gaining traction with homeowners who wanted a quieter swing operator than the old chain-drive units. That was back when Lonnie Burke was still running calls himself, before Carver Gate Repair grew into the Garrison Partners family. Lonnie studied welding and metal fabrication at Los Angeles Trade-Technical College, then spent fifteen years in the field diagnosing gate problems on the first visit rather than selling parts nobody needed. That approach became Ghost Controls sales & service at Carver, and it’s how we still operate today.
Houston’s a particular market for our Gate Installation in Houston and repair work. The lots are bigger than in the core metro, the driveways run longer, and many homeowners installed Ghost Controls operators specifically because they’re solar-ready and the sun here doesn’t quit. But solar compatibility means nothing when a limit switch fails in July heat or a control board takes a surge during one of Houston’s sudden spring storms. We stock the common Ghost Controls failure parts locally, so we’re not ordering from Dallas and making you wait four days. Our technicians are background-checked, uniformed, and show up with written prices before any work starts. The 365-Day Done Right Promise covers every repair, and if something fails inside that window, we come back free. No argument.
Common Ghost Controls Gate Repair Problems We Solve in Houston
- Corroded limit switches from hard water exposure. Houston’s groundwater carries heavy calcium and magnesium. When sprinkler systems overspray gate posts or monsoon runoff pools at the operator base, that mineral content creeps into the limit switch housing and causes intermittent stopping. We see this on TSS1 and TDS2 units near older irrigation lines. The fix is replacement with an OEM-compatible switch, then a quick adjustment to the sprinkler arc so it doesn’t happen again.
- Control board failure after power surges. Houston sits on the edge of Tornado Alley’s southern reach, and the spring storm season delivers voltage spikes that fry Ghost Controls logic boards. The APT series boards are particularly sensitive to ground reference shifts. We carry surge-tested replacement boards and can install a dedicated surge protector at the operator if your electrical run is long or shared with pool equipment.
- Articulating arm seizure from dust and grit. Houston’s dry stretches, especially late summer before the monsoon pattern kicks in, fill the air with caliche dust. That dust packs into the articulating arm pivot points on single-swing operators and causes the motor to overdraw amperage. We disassemble, clean, re-grease with high-temp bearing lubricant, and replace the arm if the bushing is wallowed out.
- Solar panel underperformance in dusty conditions. Ghost Controls solar kits are popular here for good reason, but panel efficiency drops fast when dust films build. We clean and test output, check the 12V battery health, and replace batteries that have cycled too many times through Houston’s 110-degree summer days. A weak battery strains the control board, and that’s an expensive domino.
- Remote range degradation in sprawling lots. Houston properties run large, and we’ve measured 200-foot driveway runs where the stock Ghost Controls remote struggles. We diagnose antenna placement, test for RF interference from nearby ham operators or security systems, and can install a external antenna kit or upgrade to a long-range receiver where the site layout demands it.
Ghost Controls Service in Houston: What Local Conditions Mean for Your Equipment
Here’s the Houston-specific factor that shapes every Ghost Controls repair we do: the combination of hard water, intense UV exposure, and dramatic temperature swings between summer and winter. This isn’t abstract. In the neighborhoods off Farm to Market 1960, we’ve replaced three TDS2 control boards in a single month, all from the same failure pattern. The hard water corrodes the ground reference terminal. The UV degrades the sealant on the enclosure gasket. Then a cold front drops the temperature thirty degrees overnight, condensation forms inside the board housing, and the logic circuit shorts. A generic repair shop swaps the board and leaves. We replace the board, reseal the enclosure with UV-rated silicone, and relocate the ground connection if the original post is too close to the sprinkler zone. That extra step takes ten minutes and prevents the next failure. This is what we mean by The Garrison Standard. Houston service area work demands this level of site-specific thinking, or you’re just replacing parts on a loop.
Ghost Controls Models & Products We Service in Houston
We work on the full Ghost Controls residential and light-commercial line: the TSS1 and TSS1XP single-swing operators, the TDS2 and TDS2XP dual-swing systems, the APT series vehicular slide gate operators, and the AXWK wireless keypad and premium remote accessory family. Our Houston van stock includes OEM-compatible control boards, limit switches, 12V batteries, solar panels, and articulating arm assemblies. We don’t use generic aftermarket boards that require wiring harness modifications. The parts we carry mate to Ghost Controls connectors without splicing or adapter pigtails. That matters for reliability, and it matters for speed. A same-day finish depends on having the right part, not a part that “should work.”
Ghost Controls Service Pricing in Houston
Most Ghost Controls repairs in Houston fall between $195 and $485, depending on what’s failed and what parts the job needs. A limit switch replacement with calibration runs toward the lower end. A control board swap with surge protector installation runs higher. Full operator replacement, when the unit is beyond economic repair, starts around $1,850 including removal, disposal, and new operator setup with safety edge testing.
Every estimate is free. We diagnose the system, identify the failure, and give you a written price before any work starts. That number doesn’t move once we begin. If we find additional problems during the repair, we stop, explain, and get your approval on a revised written price. No surprises at the invoice. Call (469) 530-2485 for an exact quote on your Ghost Controls system.
Serving Houston, TX – Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Houston
Are you an authorized Ghost Controls dealer or repair center?
No. Carver Gate Repair is an independent service provider. We are not manufacturer-authorized, affiliated, or endorsed by Ghost Controls. We service their equipment based on field training, technical documentation, and fifteen years of gate operator experience. Our 365-Day Done Right Promise applies to our workmanship and the parts we install.
Do you use OEM Ghost Controls parts or aftermarket substitutes?
We use OEM-compatible parts that match Ghost Controls specifications for fit, function, and connector compatibility. We do not use generic boards that require wire splicing or harness hacking. The parts we install are covered by our full-year guarantee.
How long does a typical Ghost Controls repair take in Houston?
Most repairs are completed in two to four hours on site. Control board replacements run shorter. Articulating arm rebuilds or solar system diagnostics run longer. We schedule arrival windows, not vague “sometime Tuesday” appointments. If same-day service is available, we’ll tell you when you call.
Which Ghost Controls models do you actually cover?
We service the TSS1, TSS1XP, TDS2, TDS2XP, and APT series operators, plus AXWK keypads and the full remote accessory line. If your model isn’t listed, call (469) 530-2485 and we’ll confirm whether we can support it. We don’t take jobs we’re not equipped to finish right.
What’s the typical cost to repair a Ghost Controls gate operator in Houston?
Most repairs range from $195 to $485. Control board replacement with parts and labor runs $340 – $485. Limit switch or battery service runs $195 – $285. Full operator replacement starts near $1,850. We provide a free, written estimate before any work begins. Call (469) 530-2485 to schedule your diagnostic.
Service Areas Near Houston
We run Ghost Controls service calls throughout the Houston metro and into surrounding communities. Our technicians regularly work in Ghost Controls service in Queens and Ghost Controls service in Manhattan, plus Los Angeles, Brooklyn, and San Antonio. If you’re unsure whether your property falls inside our dispatch range, call and we’ll confirm.
Book Your Ghost Controls Service in Houston Today
Call (469) 530-2485 now. A live person answers, 24 hours a day, including weekends and holidays. We’ll schedule your free estimate, dispatch a background-checked technician, and get your Ghost Controls system running right. Show up squared away, fix what’s broken, and don’t make the customer ask twice. That’s The Garrison Standard, and that’s what we deliver in Houston.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Houston since 2008.