Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Shady Hollow, TX
Gate repair in Shady Hollow, TX typically costs between $180 and $340 for common fixes like misaligned tracks or a failed limit switch, while a full motor replacement usually runs $850 to $1,600 depending on the operator brand. Most repairs here are completed the same day, and every job starts with a written price before any work begins. If your gate won’t open, sags on its hinges, or the motor hums without moving the gate, call us at (469) 530-2485 and a live person answers, day or night.
Why Shady Hollow Homes Are Different
Shady Hollow gates take a beating from the Hill Country sun and the limestone-heavy soil that shifts with every wet-dry cycle. Most homes in this part of south Austin were built between the 1970s and 1990s, and the original gate posts were often set in concrete footings that have since cracked or settled out of level. When a post leans even half an inch, the gate binds at the latch, the hinges wear unevenly, and the motor starts working against itself. We see that pattern regularly in Shady Hollow, and it changes the repair: you don’t just replace a hinge, you address the post before the new hardware goes on.
The terrain matters too. Shady Hollow lots tend to have gentle slopes and mature live oaks, which means many gates sit at the bottom of a short driveway incline. Rain runoff collects at the gate line, and low-lying operator boxes take on moisture that corrodes control boards and limit switches faster than flat-lot installs elsewhere. That’s why we check drainage around the base of every gate post on a service call here, not just the mechanical parts.
Our Main Shady Hollow Services
Shady Hollow homeowners typically call us for two things: a gate that won’t open or close, and a new gate or operator when the old one has reached the end of its life. Each service has its own page with local pricing and what to expect.
Gate Repair in Shady Hollow
A Shady Hollow gate repair usually starts with a hinge, a post, or a sensor. We check the gate’s travel path first, then the hardware, then the motor. On older wrought-iron gates here, we often find the upper hinge has pulled away from the post because the post itself is no longer plumb after years of clay soil movement. The repair then includes resetting the post or adding a steel reinforcement before remounting the gate, so the fix holds longer than a few months. See full details on Gate Repair in Shady Hollow.
Gate Installation in Shady Hollow
New gate installation in Shady Hollow means measuring the opening, confirming the post depth for local soil conditions, and matching the new gate’s weight to the operator that will move it. We order steel and ornamental iron to fit the existing driveway width, and every install includes a written quote before the first post hole is dug. HOA design standards in Shady Hollow do apply to front-facing gates, so we recommend checking your community guidelines on height and style before committing to a design. See Gate Installation in Shady Hollow for what’s included.
Gate Motor Repair in Shady Hollow
When the motor runs but the gate doesn’t move, or the gate stops mid-travel and reverses, the problem is usually the operator, not the gate. In Shady Hollow, we frequently replace failed control boards, burned capacitors, and limit switches on swing operators that have been exposed to years of direct sun and storm-water splash. We carry parts for FAAC, BFT, Linear, and Viking systems, which covers most operators installed in this area. Full breakdown on Gate Motor Repair in Shady Hollow.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Shady Hollow
Our Shady Hollow trucks carry stock for FAAC, BFT, Linear, and Viking operators, along with common replacement arms, control boards, and loop detectors for each. That means most motor repairs here don’t wait on a parts shipment; the truck arrives with what the job needs. See our brands for the full compatibility list.
Pricing for Gate Company in Shady Hollow, TX
| Service | Typical range in Shady Hollow |
|---|---|
| Gate repair (hinges, latch, alignment) | $180 – $340 |
| Gate motor replacement | $850 – $1,600 |
| Control board replacement | $400 – $900 |
| Limit switch replacement | $150 – $300 |
| Loop detector replacement | $250 – $450 |
| Swing arm operator replacement | $700 – $1,400 |
| Hinge replacement (per hinge) | $80 – $150 |
| Post reinforcement or reset | $300 – $600 |
| Remote or keypad programming | $75 – $150 |
| Full gate installation (single swing) | $1,800 – $4,500 |
Prices in Shady Hollow run slightly above the metro average when a job requires resetting posts in limestone-heavy soil or replacing a motor that sits in a low drainage spot. Whatever the number, it’s written down and agreed before work starts, and it doesn’t move at the door.
Neighborhoods We Serve in Shady Hollow
Crews dispatch from the Austin metro office and reach most Shady Hollow addresses within 60 to 90 minutes for urgent gate failures. We work throughout the community, including:
- Shady Hollow Estates
- Shady Hollow West
- Southbridge
- Brodie Lane corridor
- Escher Park area
If your gate is stuck open or won’t secure, we prioritize those calls because a gate that won’t close is a real security problem, not a cosmetic one.
Service Area – Cities Near Shady Hollow
Shady Hollow sits at the southern edge of the Austin metro, and our service area reaches the surrounding cities where homeowners face similar soil and climate conditions. We serve Houston, TX to the southeast, San Antonio, FL for scheduled jobs, and the North Texas corridor through Dallas, TX and Fort Worth, TX.
Serving Shady Hollow, TX – Our Local Coverage Area
We’re based in the Shady Hollow area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Shady Hollow
Most Shady Hollow calls get a same-day visit, and urgent cases where a gate won’t close are prioritized. Dispatch is coordinated from the Austin metro office, and crews are typically on-site in 60 to 90 minutes for emergency work. Call (469) 530-2485 and a live person confirms your window before the truck rolls.
Front-facing gates in Shady Hollow are often subject to HOA design standards covering height, style, and finish. We recommend pulling your community’s guideline document before ordering materials. We’ll match the build to those specs, but the approval itself comes from your HOA.
Every repair we make carries a 365-Day Done Right Promise in writing. If the same repair fails within a year of service, we return and fix it at no charge. That’s the Garrison Standard on every job, no exceptions and no fine print.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Shady Hollow Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K.