Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Richwood, TX
Gate problems in Richwood rarely wait for a convenient time. A swing gate that won’t close, a slide gate stuck halfway, a motor that grinds but doesn’t move – these are the calls we handle daily, and they matter more in a place like Richwood because the gate is often the first line of defense for a property that sits on a good-sized lot. Our team at Carver Gate Repair works exclusively on gates and gate motors, and we carry the parts to fix most systems in one visit. Call us at (469) 530-2485 and you’ll reach a live person, day or night.
Why Richwood Homes Are Different
Richwood sits close enough to the Gulf Coast that humidity and salt air work on metal year-round. Gate hinges, wheels, and motor housings here show surface corrosion faster than inland locations, and we see more limit-switch failures on swing operators because the arms flex more in that constant moisture. A Richwood gate job is not the same as a Dallas gate job, which is why we treat the local conditions seriously rather than applying a one-size fix. Homeowners in Richwood also tend to keep larger lots with wider drive approaches, so gate load and the hardware that supports it are typically heavier than a standard suburban install. Before any work is priced, we look at how the gate sits on its piers, how the hinges have worn, and whether the motor’s duty cycle matches the way the gate is actually used. Those variables change the parts we recommend, and getting them wrong is what turns a simple repair into a callback. The Garrison Standard applies in Richwood the same way it applies everywhere we work: every job gets a written price before work begins, the technician is background-checked and uniformed, and the repair carries a written guarantee for a full year. No exceptions.
Our Main Richwood Services
Most Richwood calls fall into one of two categories: a gate that has stopped working, or a motor that has given out. Both are covered below, with a third page dedicated to full gate installation for homeowners building or replacing an entire entry system.
Gate Repair in Richwood
A gate that drags, binds, or won’t latch is a security gap, and in Richwood that means heat and humidity are often behind the failure. Hinges seize, weld joints crack under seasonal expansion, and gate leafs sag as the soil beneath the piers shifts. Our techs look for the root cause rather than just re-hanging the leaf. That means checking the post plumb, the hinge wear, and the gate’s swing plane before deciding what needs to be replaced. Gate Repair in Richwood covers the work in detail, including what a typical repair visit looks like and how long parts usually take to arrive for older systems.
Gate Installation in Richwood
Richwood lots often mean longer gate spans and heavier fabricated steel or aluminum frames, and an installation needs to account for wind load, post depth, and drainage around the post footings. We measure the opening, check the grade and the driveway’s slope, and confirm the operator’s arm geometry before ordering rails, hinges, and bolt-down hardware. Gate Installation in Richwood explains what the full process includes, from the first site measure to the final adjustment of the operator’s limit switches.
Gate Motor Repair in Richwood
When a gate motor hums but doesn’t move, or the gate reverses mid-cycle, the blame can sit with the control board, a failed capacitor, or a limit switch that has drifted out of adjustment. Richwood’s humidity accelerates corrosion on board connections and transformer terminals, so we test components before replacing them. Gate Motor Repair in Richwood covers the common motor failures we see in this area and what parts cost for most systems.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Richwood
We stock parts for the gate motors Richwood homeowners actually have installed, including FAAC, BFT, Linear, and Viking systems. Common items like control boards, limit switches, and remote receivers are usually on the truck. For the full list, see our brands.
Pricing for Gate Company in Richwood, TX
| Service | Typical range in Richwood |
|---|---|
| Gate repair call-out and diagnosis | $75 – $150 |
| Hinge replacement (single gate) | $180 – $340 |
| Gate wheel and roller replacement | $150 – $280 |
| Swing arm and bracket repair | $190 – $360 |
| Gate motor replacement (standard swing) | $650 – $1,200 |
| Slide gate motor replacement | $900 – $1,600 |
| Control board replacement | $280 – $500 |
| Limit switch replacement | $120 – $220 |
| Loop detector installation | $250 – $420 |
| Full gate installation (steel or aluminum) | $2,800 – $6,500 |
What pushes a Richwood price up is usually corrosion damage that has spread beyond the visible part, or a motor that needs to be re-anchored because the original bolts have rusted through. Every quote we give is written, and the number you sign off on is the number you pay. If a repair fails inside the guarantee year, we return and make it right at no charge.
Neighborhoods We Serve in Richwood
We cover the full Richwood area from the neighborhoods around Highway 288 over to the Brazoria County side. Our techs are typically on site within one business day for non-emergency work, and we answer emergency calls around the clock.
- Shywood
- Richwood Village
- Lakeview Estates
- Walden
- Greenbriar
Service Area – Cities Near Richwood
While most of our work stays inside Richwood, we also handle gates in nearby markets. Homeowners in Houston, TX and Dallas, TX call us for motor replacements and new installs, and we serve Fort Worth, TX as well. We also cover San Antonio, FL for clients who manage properties in both regions.
Serving Richwood, TX – Our Local Coverage Area
We’re based in the Richwood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Richwood
For most non-emergency calls, we schedule a visit within one business day. Emergency calls, like a gate stuck open or a motor smoking, go to a live person 24/7 and we dispatch as quickly as a tech can reach the property. Call (469) 530-2485 and we’ll give you a straight answer on timing.
Most repairs don’t require approval, since you’re matching what already exists. Replacements and new installations may trigger HOA review, especially for style or height changes. We can tell you what to check before we start, and we’ll build the job to whatever the HOA has already approved. Before any work begins, the price is in writing.
Every repair we complete in Richwood is covered by a written guarantee for 365 days from the date of service. If the same problem returns inside that window, we come back and fix it at no charge. It’s called the Done Right Promise, and it’s printed on your invoice. Call (469) 530-2485 and we’ll explain exactly what’s covered for your specific gate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Richwood Customers Say
"Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.