Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Hickory Creek, TX
Hickory Creek homes run on gates that stand between the street and the family, and when one stops working, it rarely fails quietly. Carver Gate Repair handles the full scope of gate work in Hickory Creek: welded steel driveway gates, swing operators, slide tracks, loop detectors, and the motor systems that move them. Our technicians arrive with written pricing, background checks, and a full-year guarantee in hand. If your gate is grinding, sagging, or dead against the opener, call (469) 530-2485 and a live person picks up.
Why Hickory Creek Homes Are Different
Hickory Creek sits on the north edge of Lewisville Lake, part of the Denton County corridor where homes were built in waves from the 1980s through the 2000s. That spread matters to gate work. Older subdivisions here often have ornamental steel gates on square tubing posts set in concrete that has shifted over decades of North Texas clay. Newer construction on the lake side tends toward heavier, longer driveway gates, sometimes 14 to 18 feet across, which changes the operator requirements and the torque the hinges carry.
The soil is the quiet variable. Hickory Creek sits on expansive clay that swells in spring rain and contracts through August heat. Gate posts set in that soil move a fraction of an inch, then a little more, and eventually a swing gate binds against its own latch or an articulating arm loses its range. Our repair crews in Hickory Creek check post plumb and gate level before assuming the motor is the problem, because here it often is not.
Lake proximity also means wind. Gates facing open water catch gusts that push a swing leaf past its limit switch, which burns out operators faster than in sheltered interior lots. We see it regularly in Hickory Creek and adjust open and close force accordingly.
Our Main Hickory Creek Services
Most Hickory Creek calls come down to two things: a gate that stopped moving, or a gate that was never right to begin with. The three services below cover the full range, each with its own page and its own pricing detail.
Gate Repair in Hickory Creek
Sagging hinges, cracked welds, a leaf dragging across the driveway, a latch that no longer lines up. These are the common failures in Hickory Creek, and they usually compound: a hinge that was loose in March is a cracked weld by July. Our Gate Repair in Hickory Creek page walks through what we fix, what it costs, and what the one-year guarantee covers. Every repair gets a written price before the first tool leaves the truck.
Gate Installation in Hickory Creek
A new gate in Hickory Creek has to answer for the soil it sits on. We measure for gate width, driveway slope, post footing depth, and wind exposure before recommending steel gauge, hinge weight, and operator horsepower. The Gate Installation in Hickory Creek page covers the process from measure to final torque check, including what we do differently for lake-facing lots. Installations are scheduled, measured, and priced in writing before any fabrication begins.
Gate Motor Repair in Hickory Creek
When the gate won’t open but the gate itself is sound, the motor, board, or sensor is usually the culprit. Hickory Creek’s heat is hard on capacitor starts, and clay movement shifts physical stops just enough to confuse limit switches. Our Gate Motor Repair in Hickory Creek page details the motor brands we service, the failure patterns we see most, and how we match the right part to the right system on the first trip.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Pricing for Gate Company in Hickory Creek, TX
| Service | Typical range in Hickory Creek |
|---|---|
| Gate repair service call and diagnosis | $89 – $129 |
| Hinge replacement, welded steel, per hinge | $140 – $260 |
| Gate weld repair, cracked or broken member | $120 – $300 |
| Sag correction, gate leaf re-leveled and re-hung | $240 – $500 |
| Gate latch and post receiver replacement | $110 – $240 |
| Driveway slide gate track repair | $180 – $420 |
| Swing gate operator replacement | $850 – $2,100 |
| Slide gate operator replacement | $950 – $2,400 |
| Control board replacement, per brand | $260 – $700 |
| Loop detector replacement and splice | $240 – $480 |
| Full gate installation, double swing, steel | $3,200 – $8,500 |
| Repair call, weekend or overnight dispatch | $150 – $240 trip charge applied to repair |
Two things push Hickory Creek pricing above the middle of these ranges. The first is post movement in clay soil, which sometimes requires re-setting a post before a hinge or operator can be aligned. The second is lake-side wind load, which demands a heavier operator than the same gate would need a mile inland. Whatever the job, the price you approve in writing is the price on the invoice. That is non-negotiable with our crew.
Brands We Service in Hickory Creek
We stock control boards, limit switches, remote receivers, and gears for FAAC, BFT, Linear, and Viking systems, covering most of what runs in Hickory Creek. Correct parts on the truck mean one trip instead of two. See our brands page for the full nine-brand list and what we carry for each.
Neighborhoods We Serve in Hickory Creek
Our Hickory Creek work reaches the lake-adjacent streets, the older interior subdivisions, and the newer construction on the north side. Typical response for a repair call in Hickory Creek is same-day when the call comes in before early afternoon.
- Hickory Creek Ranch
- Lakeview Estates
- The Lakes of Hickory Creek
- Creekwood
- North Hickory Creek
Service Area – Cities Near Hickory Creek
For gate work beyond Hickory Creek, our Dallas-Fort Worth dispatch covers the metro. Neighboring markets include Dallas, TX, Fort Worth, TX, and Houston, TX for scheduled projects. We also serve San Antonio, FL for homeowners with properties in that area.
Serving Hickory Creek, TX – Our Local Coverage Area
We’re based in the Hickory Creek area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hickory Creek
Most Hickory Creek repair calls are dispatched same-day when they come in before roughly 2:00 p.m. Calls after that are scheduled for the next morning unless it is an emergency, in which case we run an overnight dispatch line at (469) 530-2485. A live person answers around the clock.
Some Hickory Creek subdivisions with deed restrictions require design review for a new gate or a change in gate height or material. Repairs to an existing gate typically do not. If you have an HOA, check your covenants before scheduling an installation; we handle the work itself and will match the existing style where required.
Every repair carries a written guarantee good for a full year from the date of service. If the same repair fails within that year, we return and fix it at no charge. That is a written commitment from Carver Gate Repair, handed to you before we leave the property.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hickory Creek Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.