Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Lake Worth, TX
Carver Gate Repair is the gate company Lake Worth homeowners call when a gate stops opening, sags on its hinges, or needs a full replacement. We work exclusively on gates and gate motors, so the diagnosis is faster and the repair is done right the first time. Lake Worth’s mix of older ranch homes, newer builds, and rural properties on the city’s edges means gates here see a wide range of conditions. Call (469) 530-2485 and you’ll reach a live person who can schedule a visit.
Why Lake Worth Homes Are Different
Lake Worth sits in northwest Tarrant County, and the gate work here reflects that geography. Many properties along the north and west edges of the city sit on larger lots with long driveway runs to the house. That changes the job: longer cable pulls, heavier cantilever gates, and operators that work harder against the wind. The soil here also matters more than most people expect. Lake Worth’s clay-heavy ground expands and contracts through wet and dry cycles, and over time that movement shifts gate posts out of plumb. A gate that dragged on the ground last summer may clear it again in spring, then bind up after a few weeks of rain. We account for that when we set posts and adjust hinges, because a repair that ignores the soil is a repair that won’t last.
Lake Worth homeowners also deal with HOA requirements in several subdivisions. Some HOAs require matching gate styles or specific finishes, which means a replacement gate isn’t always a simple swap. We’ve worked through enough Lake Worth HOA submittals to know which questions to ask before any work starts, so the written price reflects what’s actually required.
Our Main Lake Worth Services
These are the three jobs Lake Worth homeowners call us about most, each with its own page that covers pricing, common failures, and what the work involves.
Gate Repair in Lake Worth
Most gate repair calls in Lake Worth start with a gate that’s sagging, sticking, or stopped latching. We see welded steel gates on the older ranch properties and decorative iron on newer builds, and each one fails differently. A sagging gate is usually a hinge problem. A gate that won’t close and latch is often a post that’s moved out of line. We bring replacement hinges, post anchors, and the tools to get a gate back to square in one visit. Gate Repair in Lake Worth covers what a typical repair costs and how we diagnose the problem.
Gate Installation in Lake Worth
A new gate in Lake Worth has to fit the driveway, the existing piers or posts, and any HOA architectural rules that apply. We measure on site, build or order the gate to those dimensions, and set it so it swings or slides without binding. Post-setting matters most here because of the clay soil. We dig deeper than the frost line and use concrete that’s rated for the load. Gate Installation in Lake Worth explains the process, the timeline, and what a full install includes.
Gate Motor Repair in Lake Worth
When a gate motor quits, the first question is whether the problem is the operator, the limit switch, or the loop detector. Lake Worth’s long driveways mean swing and slide operators run more cycles than they would in a denser neighborhood, and that wear shows up in the motor first. We diagnose the specific failure, quote the repair in writing, and stock parts for the brands most common here. Gate Motor Repair in Lake Worth breaks down common motor failures and what replacement costs.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lake Worth
We service and repair motors from our brands including Linear, Viking, Ghost Controls, and DoorKing. We carry common control boards, limit switches, and remotes for these systems in our service vehicles, so most motor repairs don’t need a return trip. If a part isn’t on the truck, we get it ordered same day.
Pricing for Gate Company in Lake Worth, TX
| Service | Typical range in Lake Worth |
|---|---|
| Gate hinge replacement | $180 – $340 |
| Gate weld repair (per section) | $95 – $250 |
| Gate post reset (concrete, set & align) | $275 – $600 |
| Gate motor replacement (swing operator) | $750 – $1,200 |
| Gate motor replacement (slide operator) | $850 – $1,400 |
| Control board replacement | $250 – $500 |
| Limit switch replacement | $120 – $245 |
| Loop detector replacement | $225 – $430 |
| Remote transmitter pairing | $75 – $150 |
| Full gate installation (single swing, no motor) | $2,900 – $5,500 |
Prices in Lake Worth run higher when a post has shifted badly in the clay soil and needs a deeper reset, or when an older gate needs multiple weld repairs. Whatever the job, you get a written price before any work starts. That number doesn’t move at the door.
Neighborhoods We Serve in Lake Worth
We cover all of Lake Worth, including the subdivisions on both sides of Jacksboro Highway and the larger-lot areas near Marine Creek Lake and the Loop 820 corridor.
- Marine Creek Ranch
- Wyatt’s Crossing
- Lake Worth Village
- Silver Ridge
- The Ridglea Country Club Estates area
We schedule same- or next-day visits for most gate repairs in Lake Worth, and we’ll give you a two-hour arrival window when you call.
Service Area – Cities Near Lake Worth
Carver Gate Repair also serves nearby cities across the metro. If you’re just outside Lake Worth, you’ll find the same written pricing and guarantee in Fort Worth, TX and Dallas, TX. We also cover Houston, TX and San Antonio, FL through our network. The Garrison Standard applies at every location.
Serving Lake Worth, TX – Our Local Coverage Area
We’re based in the Lake Worth area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lake Worth
Most gate repairs in Lake Worth are scheduled same-day or next-day. When you call (469) 530-2485, a live person answers and books your visit on the spot. We give you a two-hour arrival window so you’re not waiting around all day.
That depends on your subdivision. Several Lake Worth HOAs require architectural review for a new gate or a visible change to the existing one. We can help you identify what your HOA requires before we write the quote, so the price reflects the gate the HOA will approve.
We cover the entire city, from the neighborhoods along Jacksboro Highway to the larger-acreage properties near Marine Creek Lake and the Loop 820 corridor. If you’re in Lake Worth, we’ll come out for a free estimate.
If your gate is sagging, stuck, or the motor has stopped responding, call Carver Gate Repair at (469) 530-2485. You’ll get a straight answer, a written price before any work starts, and a gate that works like it should.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Worth Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.