Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Carrollton
Gate installation in Carrollton almost always comes down to one thing: the soil under the posts. The heavy clay here expands when wet and contracts in a dry summer, which shifts shallow footings and leaves a gate binding within a year or two. We’ve built our Carrollton installation process around that reality, with deeper footings, concrete piers, and operators matched to the grade of your driveway. If you’re planning a new gate or replacing one that’s started to sag, call (469) 530-2485. We’ll give you a written price before any work starts, and Lonnie Burke, owner of Carver Gate Repair, stands behind every installation we do.
Why Carver Gate Repair Is Carrollton’s Preferred Gate Installation Company
We work on gates and gate motors all day, every day. That’s the whole job. A general contractor might install a gate once a month; our crews are in Carrollton driveways weekly, from the older ranch homes off Josey Lane to the newer builds along Hebron Parkway. Homeowners here tend to call us after a different company no-showed or changed the price at the door, so we’ve structured everything around not doing that. You get a written quote before work begins, a crew in uniform, and a phone line that a real person answers at any hour.
Every Carver Gate Repair job carries a 365-Day Done Right Promise in writing. If the gate settles, the operator faults, or a hinge binds inside that year, we come back and fix it at no charge. No argument, no service fee, no fine print. That’s the Garrison Standard we’ve operated under since 2008, and it applies to every Carrollton installation we take on.
Lonnie Burke runs Carver Gate Repair with a simple rule: the price we quote is the price you pay. We don’t send a salesperson. We send a technician who measures the post span, checks the soil condition at the gate line, tests the existing electrical if there is any, and writes up a firm number before ordering a single part.
Automatic Gate Installation in Carrollton
Automatic Gate Installation in Carrollton starts with the operator, but the real work is underground. You need footings that won’t move in expansive clay, conduit rated for direct burial, and a power run from your panel to the gate post, sized for the operator’s draw. We install swing and slide operators across the board, including Viking, Ghost Controls, DoorKing, and Elite units, matched to the gate’s weight, width, and duty cycle. A single swing gate opener with a basic keypad typically runs $2,800 to $4,600 in Carrollton, installed and programmed.
Proper Footings and Piers
Carrollton’s clay doesn’t forgive shallow work. We pour footings below the movement zone, usually 30 to 36 inches, and set posts in concrete piers with rebar where the gate carries real weight. It costs more up front than a surface mount. It also means your gate doesn’t sag in year two.
Safety Systems and Reversal Testing
Every automatic gate in Carrollton has to meet UL 325. That means photocells or contact edges, a force test on the operator, and auto-reverse that actually works on a child-sized obstruction. We test all of it before we leave, and we leave the test record with you.
Gate Installation Services in Carrollton
Gate Installation Services in Carrollton cover everything from a simple pedestrian gate between the house and the alley to a full double swing driveway gate with keypad access and a phone entry system. The scope changes with your driveway width, the gate material, and whether we’re automating it. A basic non-automated steel pedestrian gate with post set typically falls between $950 and $1,800. A double swing driveway gate in steel or ornamental iron, with operator, starts around $5,200 and can reach $12,000 depending on width and finish.
Driveway and Security Gates
Most Carrollton homeowners want a driveway gate that closes off the backyard side entrance or the full driveway approach. Security gate installations often include an articulating arm swing operator for flat approaches or a rack-and-pinion slide operator where the driveway rises. We match the operator to the geometry, not the other way around.
Pedestrian and Walk-Through Gates
A pedestrian gate on the side yard gets constant use, which means the hinge posts and latch take a beating. We install heavy-gauge posts and self-closing hinges where needed, and we can wire a keypad or card reader into the same access system as your driveway gate.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Carrollton
Carver Gate Repair technicians train on nine gate-motor brands, including Viking, Ghost Controls, DoorKing, and Elite. That matters in Carrollton because existing homes rarely have a blank slate. You might have a 15-year-old Viking swing operator on a gate that’s now binding, or a Ghost Controls retrofit that never got wired with the right gauge. We stock common parts for these systems and can typically source the rest within a day from our Dallas-Fort Worth supply network, so a repair or replacement doesn’t stall for a week waiting on freight.
Common Gate Installation Problems We See in Carrollton Homes
- Post footings too shallow for the clay. We’ve pulled posts set 18 inches deep that shifted a full inch in one season. Carrollton’s expansive soil demands deeper set posts and concrete piers, especially for any gate wider than eight feet.
- Reusing wiring that isn’t rated for direct burial. Older homes in areas like the neighborhoods off Marsh Lane often have landscape wiring run to a gate. It works until a heavy rain, then the operator faults intermittently. We run new, direct-burial-rated conduit and wire on every automation job.
- Skipping a loop detector or safety photocell. It violates UL 325 and it’s dangerous, particularly on shared driveways. A gate that can’t sense a car or a person creates a real injury risk, and it isn’t code compliant in Carrollton.
- Wrong operator for a sloped driveway. We recently installed a LiftMaster-equipped slide gate on a sloped driveway in the Trinity Mills area. The old gate had a sagging hinge post from soil movement, so we poured a deeper post footing and used a rack-and-pinion operator to handle the grade change. After setting the safety photocell and testing auto-reverse under UL 325, the gate has run smoothly for months.
Pricing for Gate Installation in Carrollton, TX
A single automatic swing gate in Carrollton runs $2,800 to $4,600 for operator, post, safety edges, and basic keypad. A double swing automatic gate runs $5,200 to $12,000 depending on width, material, and access system. A basic non-automated pedestrian gate runs $950 to $1,800. A slide gate automation on an existing rail and gate runs $3,800 to $7,500 including rack, operator, and safety systems.
Footing depth, gate weight, distance from the electrical panel, and whether we need to core through an existing driveway all move the number. We write it all down before work starts. Gate Installation crew work isn’t something we bid low on the phone and revise later. You’ll know the exact total before we order anything, and the quote is free.
We Also Serve Cities Near Carrollton
Carver Gate Repair’s crews work across the north Dallas suburbs, not just in Carrollton. We handle gate installation in Addison, Coppell, Richardson, and Lewisville with the same written pricing and the same full-year guarantee. If you’re a few miles outside the city line, call us. Scheduling covers the whole area, not just one zip code.
Serving Carrollton, TX – Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Carrollton
Most automatic gate installations in Carrollton take two to four days from first measure to final testing. The variables are footing depth, concrete cure time, and the power run from your panel. We don’t pour a footing and hang a gate the same day. Concrete needs to reach strength before we set a post under load, and in Carrollton’s clay, cutting that corner is exactly how gates fail early. Call (469) 530-2485 and we’ll give you a straight timeframe for your specific driveway.
Yes, in most cases. Automatic driveway gates in Carrollton require a permit and must meet UL 325 safety standards. We handle the paperwork and coordinate the inspection as part of the installation. That’s not an optional add-on. It’s how we keep the job legal and your gate safe.
We install and service Viking, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule operators. If your existing gate already has a motor from one of these brands, we can often reuse the mounting plate and replace just the control board or the whole operator. If it’s a brand we don’t work on, we’ll tell you straight and recommend a replacement path that fits the existing post and rail layout. Contact us at (469) 530-2485 for an exact recommendation.
We prevent sagging by pouring footing deeper than the clay’s movement zone, typically 30 to 36 inches, and using concrete piers with rebar on every post that carries hinge or roller weight. In Carrollton’s expansive clay, a shallow footing will heave in winter and settle in summer. The gate may look fine for a year, then suddenly bind at the latch. Deeper footings cost more up front and eliminate that failure mode almost entirely for the life of the gate.
Yes. We retrofit keypads, card readers, telephone entry, loop detectors, and safety photocells onto existing automatic gates throughout Carrollton. If your gate has an older operator without a coded safety edge or photocell, we can bring it up to UL 325 compliance without replacing the entire system. The work typically runs $450 to $1,400 depending on the access device and how far the control wire needs to run. For an exact retrofit quote, call (469) 530-2485.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Carrollton and the surrounding area under the Garrison Standard since 2008.