Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor Repair Across Keller
A gate motor that grinds, stalls, or refuses to reverse is more than an annoyance in Keller. It means your driveway is no longer secure, and your daily routine is now interrupted. The usual fix for a failing operator here in Keller runs between $185 and $450 for most common repairs, and a full residential operator replacement with a new motor, receiver, and safety devices typically lands between $950 and $2,800 depending on the brand and style of your operator. If your gate is acting up, call us at (469) 530-2485. A live person answers, not a voicemail box.
We serve the whole Keller area, from the treed lots near Keller-Smithfield Road to the newer sections around Heritage and Keller-Hicks. Dispatch for Keller is coordinated from our Dallas-Fort Worth office, and our crews know the specific ways this area’s soil and wiring practices stress gate motors. When you call, we schedule a time, show up in a uniform, and hand you a written price before any work begins. That is how we operate in every city we serve, including Keller.
Why Carver Gate Repair Is Keller’s Preferred Gate Motor Repair Company
Keller homeowners call us for Gate Installation – Keller because the process is predictable. You book a visit, a background-checked technician arrives in a Carver uniform, and you get a written price before any part is removed. That price does not change when the job is open. It is part of The Garrison Standard, the operating code we have followed since 2008 under the Garrison Partners family. The code is simple: written prices, clean work sites, and a written guarantee on every repair.
Our 365-Day Done Right Promise is exactly that. Every gate motor repair we complete in Keller carries a written guarantee for a full year from the date of service. If the repair fails inside that year, we come back and fix it. No charge, second visit included. That is not a sales pitch. It is the floor of how we work.
Phones are staffed around the clock, every day of the year. When a gate motor fails on a Saturday afternoon or a holiday morning, a person picks up the phone at Carver. You will not sit through a phone tree waiting for a callback. You will talk to someone who can schedule a technician for Keller, including neighborhoods like Marshall Ridge, Saratoga, and Hidden Lakes.
Lonnie Burke leads our team, and he holds every crew to The Garrison Code on each Keller visit: arrive on time, protect the work area, explain the repair in plain language, and leave the site cleaner than we found it. That discipline is why Keller homeowners keep our number in their phones after the first repair.
Gate Keypad in Keller
A Gate Keypad installation or repair in Keller is one of the most common calls we get from homeowners who want to add or restore a PIN-based entry for delivery drivers, landscape crews, or family members. The keypad itself is a weather-sealed unit mounted near the driveway, wired to the gate operator’s control board, and programmed with one or more entry codes. In Keller, where summer heat can reach 100 degrees and winter ice storms occasionally coat exposed fittings, keypad failures often trace to dried-out weather seals or corroded terminals, not the operator itself.
What a Keypad Service Call Includes
We test the keypad’s wired feed back to the operator, replace failing enclosure gaskets, and reprogram codes on site. If the keypad has been exposed to Keller’s wet-dry cycle and the terminals are green with corrosion, we replace the unit rather than cleaning terminals that will fail again after the next storm. A typical Keller keypad replacement runs $185 to $350, including the part and the service call.
When Keller Homeowners Call for This
Usually the call starts with, “The keypad stopped working after that hard rain.” In Keller’s newer subdivisions, keypads mounted on the outside face of a brick pier or a metal post take full sun in the afternoon and full water during spring storms. We mount replacements with proper drip allowances and sealed entry points, so they do not fail on the next cycle.
If you need a keypad repaired, replaced, or added to an existing operator, call (469) 530-2485. The written price covers the job, no movement at the door.
Gate Closer Spring in Keller
A Gate Closer Spring is the tensioning device on a swing gate that pulls the leaf closed when the operator releases it. In Keller, clay soil movement is the enemy of closer springs. As the soil expands and contracts through wet and dry seasons, the hinge post shifts, the gate’s reveal changes, and the closer spring either binds or loses tension. The symptom is a gate that slams shut, drifts open, or fights the operator on every cycle.
Adjustment vs. Replacement
Some Keller closer springs can be re-tensioned and the gate re-hung to sit square again. That is a $165 to $250 job when the spring and brackets are sound. If the spring has been fighting a sagging gate for years, the coil is often fatigued or the bracket has torn at the mounting point. Replacement of a closer spring in Keller normally runs $220 to $380 including the part and the on-site adjustment.
Why Post Alignment Matters Here
On older Keller properties, especially the 1980s and 1990s builds near Keller-Smithfield, the original gate posts were set before much of the clay movement was understood. A closer spring replacement that ignores the post lean will fail again because the geometry is still wrong. We level the hinge post, re-shim the pad, and then set the spring tension to match the gate’s actual travel. That sequence is what makes the repair hold.
For a gate that slams or drifts in Keller, call (469) 530-2485 and we will send a technician to check the spring and the post. You will get a written price before any work starts.
Trusted Brands We Service in Keller
We keep common parts for Viking, Ghost Controls, DoorKing, and Elite operators on our trucks that serve Keller, so the job does not stall waiting on a shipment. Our technicians are trained on nine gate-motor brands, including these four, and they know the specific failure modes each brand runs into when mounted on Keller’s expansive clay. A Viking swing operator with a stripped release hub gets the correct replacement part, not a workaround. A Ghost Controls board with a relay fault gets a proper diagnostic check before any parts order is placed. Whether your Keller gate runs an older DoorKing slide operator or a newer Elite swing unit, we match the right part to the exact board revision, because close enough is not good enough on a gate that weighs several hundred pounds. Gate Motor Repair is what we do, and we do it across all nine brands we support.
Common Gate Motor Repair Problems We See in Keller Homes
- Sagging swing gates on aging posts. The expansive clay under Keller shifts seasonally, so hinge posts lean and the gate drags on the opener. The motor is often fine; the post geometry is not. We re-hang the gate, re-shim the pad, and then retest the operator.
- Buried control-wire faults in newer subdivisions. In neighborhoods like Heritage and Keller-Hicks, low-voltage control wire is commonly laid in the same trench as irrigation lines. A nicked or water-logged run causes intermittent stops that look exactly like a bad motor. We trace the run and isolate the fault before condemning an operator.
- Rack and pinion out of mesh. Soil heave moves the concrete pad under slide gates, which pushes the rack out of mesh with the pinion gear. The gate shudders mid-travel or refuses to move. We re-level the pad or adjust the rack, then re-test the full travel.
- Faulting entrapment protection. Photo-eyes and edge sensors fall out of alignment when posts shift, and the operator trips every cycle as a safety precaution. The fix is realignment and a full reversal test, not bypassing the safety circuit.
Pricing for Gate Motor Repair in Keller, TX
A service call to diagnose a gate motor problem in Keller runs $85 to $110, and that fee is credited toward the repair if you proceed with the work. Common repairs like limit switch replacements, photo-eye realignment, or a new control board run $185 to $450, depending on the operator model and what is open on the board. A full residential operator replacement in Keller typically runs $950 to $2,800, including the operator, new safety devices, and the setup and reversal testing required to meet UL 325. The gap between low and high comes down to the operator you choose: a basic swing unit runs lower; a high-cycle slide operator with a loop detector and new keypad runs higher. Every quote is written, agreed before work starts, and fixed. Call (469) 530-2485 for a free estimate on your specific gate.
We Also Serve Cities Near Keller
Our Keller crews also cover Gate Motor Repair in Keller and the surrounding area, including Haslet, North Richland Hills, Roanoke, and Southlake. The same written pricing, background-checked technicians, and full-year guarantee apply in every one of those cities. Call the same number and a live person answers.
Serving Keller, TX – Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in Keller
Not usually. The most common cause here is a misaligned photo-eye or edge sensor from shifting posts on Keller’s expansive clay, followed closely by a chafed control wire. The operator itself may be perfectly fine. We start with the safety circuit and wiring before touching the motor. A diagnosis visit in Keller costs $85 to $110, credited toward any repair. Call (469) 530-2485 and we will trace it down.
A direct operator replacement where the pad, posts, and wiring are sound takes one service visit, usually four to six hours on site. If the hinge posts have shifted from clay movement, or the pad needs re-leveling, add time for concrete work and shimming before the new operator is mounted. We never promise same-day turnaround on an installation; we schedule the time the job actually takes and hand you a written price at the start.
We repair Viking, Ghost Controls, DoorKing, and Elite units, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Our crews carry common replacement parts for the four brands most common in Keller and can source others quickly from our parts network. The written guarantee applies regardless of brand.
The clay soil under your hinge post has moved, and the post is leaning. As the gap between the gate and the post changes, the gate’s weight shifts onto the operator, which now has to push uphill against steel fatigue. The fix is post leveling and pad shimming, then a closer spring adjustment, not just replacing the operator. Done right, the repair holds through Keller’s wet and dry seasons.
Every repair and every installation includes a full reversal and entrapment test in both directions, using the actual gate weight and the installed safety devices. We follow the UL 325 standard and do not skip the test for speed. If a safety photo-eye or edge sensor fails, we replace or re-align it before we call the job done. A gate operator that does not reverse is a hazard, and we do not leave one running in Keller.
If your gate motor is failing in Keller, call (469) 530-2485 for a free estimate. A live person answers, and we will get a background-checked technician to your driveway with a written price. The gate gets fixed properly, and the repair carries our full-year written guarantee.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Keller under The Garrison Standard since 2008.