Gate Repair in Burbank - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across Burbank

A gate that won’t open or close in Burbank is usually not a motor problem. It’s a footing problem, a hinge-post problem, or a power problem. We see it every week on the older hillside streets and in the flat Rancho neighborhoods alike. Carver Gate Repair fixes gates across Burbank, and we answer the phone at (469) 530-2485 with a live person, day or night. When our technician rolls up to your home, you get a written price before any work starts, and that number does not move.

Call (469) 530-2485

We know Burbank’s driveways. We know the tight lots off Magnolia Boulevard, the sloping approaches in the hills above Glenoaks, and the older pre-1960s construction where the gate was built around the property rather than the other way around. That local familiarity means we diagnose the actual problem the first time, not the symptom.

Why Carver Gate Repair Is Burbank’s Preferred Gate Repair Company

Our lead in Burbank, Lonnie Burke, has spent years tracing gate failures back to their source: footings that shifted, posts that rotted, circuits that were never adequate for the operator they now power. That discipline runs through the whole crew. Every technician is background-checked and arrives in uniform, so you know exactly who you’re letting through your gate before the work begins.

Burbank homeowners call us because we operate to what we call the Garrison Standard. Written prices. Written guarantees. Clean work sites. We don’t leave cutoff wheels, concrete dust, or old hardware in your driveway. And if a repair fails inside the guarantee window, we return and fix it free of charge. That guarantee lasts a full year from the date of service, and it is in writing on every job.

Our dispatch for Burbank runs out of the brand’s Los Angeles office, with crews serving Burbank locally. Response times are measured in hours for emergency calls, not days. You will speak to a person when you call, not a voicemail tree.

Wrought Iron Gate Repair in Burbank

Wrought iron gate repair in Burbank usually comes down to two things: the condition of the steel and the condition of what holds it up. Burbank’s older residential streets, particularly in the hillside districts and Rancho-adjacent properties, are full of wrought iron gates that have been standing since before the house changed hands two or three times. The gate panel itself may still be sound, but the hinge posts have shifted, the hinges have worn oval, and the gate drags or binds against the post.

When we repair a wrought iron gate in Burbank, we start with the load path. Is the post still plumb? Has the concrete footing cracked or sunk on the slope? Is the hinge pin worn enough to let the gate drop? Then we correct those issues before touching the gate panel itself. A typical wrought iron repair in Burbank runs $275 to $650 depending on whether we’re replacing hinges and adjusting the gate or cutting out and replacing rusted sections of steel.

Hinge and Post Work

The most common wrought iron repair we perform in Burbank is resetting a hinge post that has moved. On sloping driveways, water follows the grade and works its way into the footing, eroding the concrete over decades. The post leans, the gate drops, and the latch no longer lines up. We cut out the old footing, pour a new one, and set the post so the gate hangs dead level.

Weld and Rust Repair

Burbank’s dry summers are easy on steel, but winter rains get into joints, scrollwork, and the bottom rail where moisture sits. We grind out the rust, weld in new sections where the metal has thinned, and treat the repair so it doesn’t bloom again inside a season. If the gate has significant rust through the bottom rail, we’ll tell you honestly whether repair or replacement makes more sense for the money.

Call Gate Repair at (469) 530-2485 for an honest assessment. We’ll tell you what the gate actually needs, not what’s easiest for us to sell.

Metal Gate Repair in Burbank

Metal gate repair in Burbank covers the broader range: steel tube gates, aluminum driveway gates, chain-link gates, and the fabricated steel gates common on mid-century homes throughout the flatland neighborhoods. The failure profile here is different from wrought iron. Aluminum gates tend to crack at welds or sag at the hinge side. Steel tube gates rust from the inside out, especially where water collects inside the bottom rail. Chain-link gates pull out of square when the post shifts.

We repair all of it. A typical metal gate repair in Burbank runs $225 to $550, covering hinge replacement, weld repair, panel straightening, and post resetting. If the gate is powered, the operator and the safety edges get inspected as part of the job, because a gate that’s been sagging has been putting extra load on the motor the whole time.

Gate Realignment

When a metal gate starts dragging or the latch won’t catch, the frame has usually racked slightly out of square. We bring it back into alignment, reinforce the corners where the racking started, and re-set the hinges so the gate swings true. This is the repair that most often gets skipped by generalist contractors, and it’s the reason the same gate fails repeatedly.

Operator Load Correction

A metal gate that has sagged is heavier on the operator than the motor was ever sized for. After we repair the gate, we run the full operator test: current draw, limit switch position, safety photocell, and reversal pressure. In Burbank, where many operators are older and wired into a shared garage subpanel, that test catches problems before they strand the gate closed.

Trusted Brands We Service in Burbank

Our Burbank technicians work on gate operators from DoorKing, Ghost Controls, and Elite, along with the rest of the major brands. We carry the common parts for these systems on our trucks, so a failed limit switch or a worn drive gear for a DoorKing or a Ghost Controls swing operator in Burbank usually gets fixed that day, not ordered and rescheduled. When a part isn’t on the truck, we source it locally when we can, and we tell you exactly how long it will take. You’ll get a written price for the part and labor before we order anything.

Common Gate Repair Problems We See in Burbank Homes

• Hinge-post rot and footing movement on sloping driveways. On Burbank’s older hillside streets and Rancho-adjacent lots, the gate panel is often fine while the post has shifted out of plumb. The gate binds, the operator trips its current sensing, and the homeowner thinks the motor is dead. It isn’t. The foundation under the post is the problem.
• Brownouts from undersized or shared garage subpanel circuits. Many homes in Burbank’s flatland neighborhoods were built before dedicated gate circuits were standard. The gate operator pulls power from the garage subpanel, and when the operator starts while the garage lights or a workshop tool is running, the voltage dips. The gate stalls intermittently, resets, or faults out for no apparent reason.
• Slide gates drifting out of alignment on tight lots. Burbank lots are narrow, and many slide gates were installed without a proper concrete pad under the track or gear rack. The rack shifts, the pinion gear chews against it, and the gate drifts until it jams or strips the gear. We see this most often on the smaller flatland properties off Magnolia and Burbank Boulevard.
• Safety-edge and photocell failures on older automatic gates. A gate that reverses for no reason, or won’t close at all, is often a worn safety edge or a misaligned photocell, not a bad motor. On Burbank gates that have been through several years of sun and rain, the safety edge weathers and cracks, and the photocell lenses cloud over. We replace those before we ever condemn an operator.

One job that sticks with our crew: a homeowner on North Beachwood Drive had a LiftMaster swing gate that would open halfway and stop. The panel had been “fixed” twice by another company. The real problem was a rotted hinge post footing that had shifted on the slope, throwing the gate out of plumb and tripping the operator’s current sensing. Our tech poured a new post footing, corrected the sag, re-leveled the arms, and re-tested the safety photocell and reversal. The gate has run clean since. That’s the difference between diagnosing the symptom and finding the cause.

Pricing for Gate Repair in Burbank, CA

We Also Serve Cities Near Burbank

Our crews cover Burbank and the surrounding communities, so if you’re across the line in Burbank, we’ve got you covered. We also run calls to Glendale, West Hollywood, Altadena, and Beverly Hills. Same standards, same written prices, same year-long guarantee. Call (469) 530-2485 and we’ll route the nearest technician to your gate.

FAQs About Gate Repair in Burbank