Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Keller
Gate repair in Keller usually means one of two things: a gate that won’t open, or a gate that won’t close. Both are problems we fix quickly, and both start with the same thing: a real person answering the phone at (469) 530-2485, then a background-checked technician arriving in a uniform with a written price before any work starts. We work throughout Keller, from the neighborhoods off Rufe Snow Drive to the newer developments west of Keller-Hicks Road, and we know which failures this area’s soil and weather actually cause.
Why Carver Gate Repair Is Keller’s Preferred Gate Repair Company
Our reputation in Keller is built on showing up when we say we will and quoting a number that doesn’t change when the job is open. Homeowners here have been burned by no-shows and moving prices, and our process is designed around fixing that: you get a written price before we touch the gate, and the technician who arrives is background-checked and uniformed. The work itself is covered by the 365-Day Done Right Promise, a written guarantee on every repair, good for a full year. If the same repair fails inside that window, the second visit is free.
Lonnie Burke leads our team and holds every technician to The Garrison Standard: clean site, clear explanation of the problem, no upselling. We dispatch from a Dallas-Fort Worth office, and crews serve Keller locally as part of the Garrison Partners family operating to that standard since 2008. Keller homeowners call us because they want one number, one price, and one visit that fixes the gate. That is what we deliver.
Wood Gate Repair in Keller
Wood Gate Repair in Keller usually involves more than the wood itself. Most wood driveway gates here are built from cedar or pressure-treated pine, and both handle the Texas sun reasonably well. What they don’t handle is a hinge post leaning in Keller’s shrink-swell clay. When the soil heaves, the post tilts, the gate sags, and the latch stops lining up. The gate looks broken, but the panel is often still solid.
We see this on single-swing and double-swing driveway gates across Keller, from older homes near Bear Creek Park to newer builds off Mount Gilead Road. A typical wood gate panel repair or sag correction in Keller runs $250 to $600 depending on size and hardware condition. If the post itself has moved, the fix is bigger: pulling the post, resetting it on a proper footing, rehanging the gate, and re-aligning the operator. That job runs $700 to $1,400. We quote the exact number after putting eyes on the gate, and that number is in writing before we start.
Sag correction and panel realignment
A sagging wood gate strains every hinge, latch, and opener component. We brace the panel, reset the hinges if the screw holes have wallowed out, and bring the gate back to plumb. On a double gate, both leaves get checked so one doesn’t drag while the other swings free.
Post reset and footing work
This is the repair that actually lasts in Keller. Bell-shaped, steel-reinforced concrete set below the clay’s active movement zone is the standard. Anything shallower will heave again within a couple of seasons, no matter how well the gate itself was built.
Driveway Gate Repair in Keller
Driveway Gate Repair in Keller covers everything from a sliding gate that grinds along its track to a swing gate whose operator trips out halfway through a cycle. Automatic driveway gates in this area do more work than most people realize, cycling daily in heat, rain, and the fine clay dust that works into every moving part. When the gate gets out of plumb or the drive components wear, the operator fights the geometry and eventually stalls or throws an error.
The most common fix is realignment: bringing the gate back square, adjusting the operator travel, and replacing worn hardware before it damages the motor. A typical driveway gate repair in Keller, including alignment and hardware replacement, runs $200 to $550. If the operator itself has failed, a motor replacement typically runs $600 to $1,200 installed, depending on brand and horsepower. We stock parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so most repairs are completed the same day the technician arrives.
Swing gate operator service
Swing operators work hard in Keller. The heat shortens capacitor life, and a gate that is even slightly out of balance stresses the actuator. We check travel limits, force settings, and the condition of the articulating arm on every swing gate repair.
Slide gate track and drive repair
Slide gates collect debris, and when that debris changes the travel path, the rack and pinion take the damage. We clean and realign the track, adjust the drive components, and verify the gate moves through its full travel without binding.
Trusted Brands We Service in Keller
Most Keller homes with automatic gates have a LiftMaster, FAAC, or Linear operator, and our techs are trained on all three plus BFT, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That breadth matters when a FAAC board fails and the homeowner doesn’t want to wait on a dealer. We keep common boards, remotes, photocells, and limit switches stocked on our service vehicles, so turnaround in Keller is measured in hours, not weeks. The right part matched to the right system, installed by a technician who actually knows that brand’s quirks. That’s the difference between a repair that lasts and one that fails again in three months.
Common Gate Repair Problems We See in Keller Homes
- Sagging swing gates from moving posts. Keller’s shrink-swell clay expands in wet weather and contracts in dry spells. Footings that weren’t bell-shaped and steel-reinforced below the active clay zone heave, the hinge post tilts, and the gate drags. Fixing the panel without fixing the post means a repeat visit in a season or two.
- Operators tripping or stalling out. When a gate comes out of plumb, the operator has to work against the gate’s own weight and bind. The motor overheats, the limit switches trip, and the homeowner assumes the board is bad. Usually it is an alignment problem, not a control board problem.
- Safety devices drifted or non-responsive. Photocells get bumped by lawn equipment. Edge sensors lose connection. UL 325 requires every automatic gate to reverse on contact and to stop for an obstruction, and we test that on every call. A gate that doesn’t reverse is a hazard, not just a nuisance.
- Slide gate wear from debris and misalignment. Keller’s clay dust and seasonal debris build up in the track, the gate drifts off its travel path, and the rack and pinion wear unevenly. Regular track cleaning and proper set-back of the wheels prevent most of these failures.
Pricing for Gate Repair in Keller, TX
Gate repair in Keller, TX typically runs $200 to $550 for alignment and hardware work, $250 to $600 for wood panel repair, and $600 to $1,200 when an operator motor needs replacement. The biggest variable is whether the post has moved, and in Keller that’s more common than in areas with stable soil. If the post has heaved, expect $700 to $1,400 for a proper reset with a bell-shaped footing. Every estimate is free, and the price we quote is the price you pay, in writing, before any work begins. Call (469) 530-2485 and a live person will schedule your estimate.
We Also Serve Cities Near Keller
Our Gate Repair team handles the same soil conditions and gate systems in Haslet, North Richland Hills, Roanoke, and Southlake. If your property is in one of those cities, our Gate Repair in Keller crew covers it on the same route. Same written prices, same guarantee.
Serving Keller, TX – Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Keller
Most likely just an adjustment, and the first thing we check is the hinge post. On a cul-de-sac off Rufe Snow Drive, we found a wood swing gate dragging two inches on the driveway. The panel was solid; the post had tilted in the clay and pulled everything out of line. We reset the post on a bell-shaped footing below the active clay zone, replaced the hinges, corrected the sag, and re-ran the LiftMaster operator through its safety-edge and reversal tests. The gate didn’t need replacing. Many Keller gate problems trace back to a moving post, not a worn panel. Call (469) 530-2485 and we’ll tell you which one you have.
Yes, and not just for code compliance. Under UL 325, every automatic gate has to reverse on contact with an obstruction and stop or reverse when a photocell beam is interrupted. Photocells and edge sensors drift, get bumped, or lose connection over time, and the gate becomes an entrapment risk. We test the safety loop and reversal function on every automatic gate repair in Keller, because a gate that doesn’t reverse is dangerous, no matter how well it opens.
A proper installation starts underground: post holes drilled below the zone of seasonal clay movement, then bell-shaped and steel-reinforced concrete footings. After that come the panel, the hinges, the operator mount, the power run, safety photocells and edge sensors, and a full travel and reversal test. In Keller’s shrink-swell clay, the footing is the most important part, and skipping it is why so many installations fail within two years. We quote installations with all of that in writing, and the work carries the same 365-Day Done Right Promise.
Most repairs can. Common parts like FAAC boards, Linear limit switches, and LiftMaster remotes are stocked on our trucks, so many calls are completed the same day. Emergency calls for a gate stuck open or stuck closed are prioritized, and our phone is answered by a live person 24/7 at (469) 530-2485. Full installations and new gate builds are measured, quoted, and scheduled, not dispatched same-day.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because each brand has its own failure patterns and parts availability, and matching the right part to the right system is what makes a repair hold up. If your operator isn’t on that list, call anyway; we’ll tell you honestly if we work on it.
When your gate won’t open or won’t close, call (469) 530-2485. A live person answers, every time. We’ll schedule a visit, give you a written price before any work starts, and stand behind the repair for a full year.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Keller with written prices, background-checked techs, and a full-year guarantee on every repair.