Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Edmonds, WA
Carver Gate Repair is the gate company Edmonds homeowners call when a driveway gate stops opening, a swing arm loses its travel, or a motor runs without moving anything. Our crews handle gate repair, gate installation, and gate motor repair across the Edmonds area, with technicians trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment. Every job gets a written price before work starts, and every repair carries a written guarantee good for a full year. Calls are answered by a live person around the clock at (469) 530-2485.
Why Edmonds Homes Are Different
Edmonds is a saltwater town, and that changes gate work in ways that don’t apply a mile inland. Marine air off Puget Sound keeps hinges, brackets, and motor housings wet longer than they stay wet in Lynnwood or Mountlake Terrace. Zinc hardware corrodes faster. Powder-coated frames hold up, but untreated welds and cheap fasteners don’t. When we open a gate panel in the Edmonds Bowl or along Sunset Avenue, we expect to find rust where a Seattle inspector might not. We stock stainless hardware and sealed motor enclosures for exactly that reason.
The housing stock adds another layer. Much of Edmonds was built between the 1930s and 1970s, and many of those older homes have narrow driveways, short setbacks, and original brick or concrete pillars never designed for a modern automated gate. We regularly retrofit operators onto posts that won’t accept a standard swing arm without reinforcement. Terrain matters too: sections of Edmonds slope toward the water, and a gate on a grade puts more load on the operator than the same gate on flat ground. We set the open and close force limits accordingly. Some neighborhoods, particularly gated or HOA-bound communities in the Perrinville and Seaview areas, also require pre-approval for any gate or operator replacement, so we walk homeowners through what the board needs before we order parts.
Our Main Edmonds Services
Most Edmonds calls to us fall into one of three categories: a gate that stopped working, a gate that needs to be replaced, or a motor that runs but doesn’t move the gate. Each has its own Edmonds page below.
Gate Repair in Edmonds
When a gate won’t open or won’t close, the cause is usually mechanical before it’s electrical. In Edmonds, we most often find worn hinge bearings, sagging panels, or a chain that’s jumped a sprocket on older slide gates. Marine corrosion accelerates all of it. We start with an inspection of the gate’s travel, then inspect hinges, rollers, and the operator itself before writing up a price. Nothing gets replaced without that written number in front of the homeowner. Full details are on the Gate Repair in Edmonds page.
Gate Installation in Edmonds
Edmonds driveways often dictate steel over aluminum, especially near the water, and post depth is critical in the wet, sandy soil close to the Sound. We measure the driveway grade, confirm the swing clearance and the set-back from the sidewalk, then price the full install in writing before any material is ordered. New gate installations in Edmonds are scheduled, measured work, never a same-day job. If you’re replacing an old wooden gate or adding a gate where the pillars were never built for an operator, we address that before the first panel is hung. See the Gate Installation in Edmonds page for specifics.
Gate Motor Repair in Edmonds
Salt air is hard on circuit boards and limit switches. A motor that hums but doesn’t move, cycles without stopping, or opens halfway and reverses often has a failed limit switch, a corroded terminal block, or a burned capacitor. Our technicians train on the brands already installed in Edmonds, so we’re not guessing at wiring diagrams on a Gate Motor in a driveway near Edmonds Way. We replace the failed part, set the opening and closing force, and test the safety edges before we leave. Read the Gate Motor Repair in Edmonds page for the full scope.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Edmonds
Our Edmonds trucks carry the common wear parts for Linear, Viking, Ghost Controls, and DoorKing systems, among others. That usually means one trip instead of two. See our brands page for the full list of nine gate-motor manufacturers our technicians are trained on.
Pricing for Gate Company in Edmonds, WA
| Service | Typical range in Edmonds |
|---|---|
| Gate repair – hinge or bracket replacement | $180 – $320 |
| Gate repair – track or roller realignment | $200 – $360 |
| Gate motor replacement | $650 – $1,400 |
| Gate motor repair – limit switch or wiring | $190 – $340 |
| Swing gate operator repair | $240 – $420 |
| Slide gate operator repair | $240 – $440 |
| Loop detector replacement | $210 – $380 |
| Remote transmitter add-on | $90 – $180 |
| Keypad or intercom installation | $180 – $350 |
What pushes a price higher in Edmonds is usually the condition behind the gate: rusted posts from years of salt air, a panel that’s too heavy for a light-duty operator, or a driveway grade that forces a heavier motor and longer installation time. Every price is quoted and agreed in writing before any work begins, and that number does not move at the door.
Neighborhoods We Serve in Edmonds
We cover the full Edmonds area, from the Edmonds Bowl up to Perrinville, out toward Seaview, and the streets along Sunset Avenue and Edmonds Way. Our Edmonds crew typically responds same-day for gate repair calls and schedules installations within the week.
- Edmonds Bowl
- Perrinville
- Seaview
- Salmon Creek
- Westgate
Service Area – Cities Near Edmonds
We serve Edmonds and the neighboring communities of Mountlake Terrace, WA, Lynnwood, WA, Kenmore, WA, and Kingston, WA. Dispatch and scheduling are coordinated from the brand’s Seattle office; the crews themselves cover Edmonds locally.
Serving Edmonds, WA – Our Local Coverage Area
We’re based in the Edmonds area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Edmonds
Most Edmonds gate repair calls are handled the same day. Gate motor repair and gate repair are our priority response jobs. Gate installations are measured and scheduled, typically within a few business days. Call (469) 530-2485 and a live person will give you an arrival window.
Some Edmonds HOAs, especially in gated or planned communities, require written approval before a gate or operator can be replaced. We don’t handle the paperwork, but we will tell you what the HOA needs and wait for the approval before ordering parts or starting the job.
Every repair we complete in Edmonds includes a written guarantee good for a full year from the date of service. If the repair fails within that window, we return and correct it at no charge. The guarantee is in writing on the job summary, not a verbal promise.
If your gate is down or your operator is acting up in Edmonds, call (469) 530-2485 for a free estimate. A live person answers, and you’ll get a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Edmonds Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K.