Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across North Richland Hills
When a gate stops opening in North Richland Hills, you need a technician who understands what that gate is up against. Expansive clay soil shifts with every wet-dry cycle, post footings heave, and an operator wired to a detached garage GFCI can go dead overnight without the motor ever failing. Our crews work throughout North Richland Hills, from the neighborhoods off Davis Boulevard to the streets around Iron Horse and Smithfield. Call (469) 530-2485 and a live person answers, 24 hours a day. We show up on time, inspect the gate, and hand you a written price before any work begins.
Why Carver Gate Repair Is North Richland Hills’s Preferred Gate Repair Company
Homeowners in North Richland Hills call us because the price we quote is the price on the invoice. That is not a slogan here. Every repair starts with a written price delivered before work starts, and every repair carries a written guarantee for a full year. If the repair fails inside that year, we return and make it right at no charge. No argument, no second invoice.
Our technicians are background-checked and uniformed, and they arrive with the parts to work on gate motors from LiftMaster, Viking, DoorKing, Linear, and Ghost Controls among the nine brands we service. That saves North Richland Hills homeowners a second trip and a second missed afternoon. The work is backed by The Garrison Standard, which the Garrison Partners family has operated under since 2008. Lonnie Burke leads the Carver Gate Repair team, and the standard he enforces is simple: written prices, clean sites, and a gate that works after we leave.
Response time to North Richland Hills runs fast because dispatch and scheduling are coordinated from the Dallas-Fort Worth office, with crews positioned to cover the city without a long drive. For emergency gate failures, call (469) 530-2485 and a live person will get a technician moving.
Sliding Gate Repair in North Richland Hills
Sliding gate repair in North Richland Hills is the service we get called out for most often, and for good reason. A slide gate rides on a steel rack and pinion mounted to a track along the driveway, and when the concrete footing under that track heaves from seasonal clay movement in North Richland Hills, the gate starts to bind, drag, and stall halfway through its travel. Homeowners first notice a grinding sound, then a gate that stops and reverses, then a motor that overheats from fighting the extra resistance.
Replacing a worn rack and re-setting the track on stable footing typically runs $450 to $900 depending on how much concrete work is needed. If the operator itself has burned out from strain, a motor replacement pushes the total to $1,200 to $2,400. You get a written price for all of it before we start.
Track and Rack Alignment
When a gate drags, the common North Richland Hills fix is not a new motor. It is re-aligning or replacing the rack, then shimming and re-securing the track to a re-poured pad where needed. We handle the concrete work as part of the repair, not as a surprise add-on.
Sliding Gate Operator Replacement
If the operator has been fighting a bound gate for months, the motor is usually the casualty. We match the replacement operator to the gate weight and travel length, then recommission the limit switches, loop detector, and safety photocell so reversal testing passes clean.
Wrought Iron Gate Repair in North Richland Hills
Wrought iron gate repair in North Richland Hills usually comes down to hinge post footing problems. A heavy iron gate hanging off a post that has been heaved by expansive clay will sag at the latch corner, scrape the driveway, and force the hinge welds to crack over time. The gate panel itself may still be straight, but the footing underneath has moved, and that movement is what North Richland Hills clay brings every dry season after a wet one.
Weld repair on cracks and broken hinge tabs runs $200 to $500 per repair, and a full hinge replacement with post re-setting lands between $600 and $1,200. If the gate needs to be taken down, straightened, and re-hung, expect $900 to $1,700. Written price, always, before the torch comes out.
Post and Footing Re-set
This is the fix that actually holds. We excavate around the hinge post, re-pour and compact a new footing, and re-hang the gate plumb so the latch lines up. A panel-only sag correction skips this step, which is why it fails again within a season in North Richland Hills soil.
Weld and Rust Repair
North Richland Hills humidity and temperature swings push surface rust into gate tubing at the weld joints faster than the dry counties to the west. We grind back rust, weld in new material where the section has thinned, and prime and seal the repair so it is not a paint job over a returning problem.
Trusted Brands We Service in North Richland Hills
We stock parts for Viking, DoorKing, Linear, and Ghost Controls operators, and our technicians are trained on all nine major gate motor brands, including LiftMaster, FAAC, and BFT. For North Richland Hills customers with an older Viking swing operator or a DoorKing slide motor, that means we do not waste a visit ordering a part that takes another week to arrive. Dispatch and scheduling run from the Dallas-Fort Worth office, but the parts inventory moves to where the work is, and the work is here in North Richland Hills.
Common Gate Repair Problems We See in North Richland Hills Homes
- Post footings heaving from expansive clay: North Richland Hills sits on the Trinity River corridor, and the clay here swells and shrinks with rain and drought. A gate that was hung level in spring can bind by late summer because the hinge post footing has moved a half inch. The fix is re-setting the post, not just shimming the panel.
- Dead operator traced to an upstream GFCI: A lot of North Richland Hills gate operators pull 120V from a detached garage or a yard post. When that circuit’s GFCI trips, the whole operator shows no power, and the keypad or loop detector never gets re-tested. We check the upstream breaker before condemning a motor, and we test the keypad and loop detector after restoring power.
- Swing gate operators burning out on underpowered solar: Gates in the neighborhoods off Davis Boulevard that run on solar or low-voltage systems were sometimes installed with a panel that was heavier than the actuator was rated for. The operator burns out trying to move the weight, and replacing the operator without addressing the panel size just repeats the failure.
- Driveway gates damaged by storm and hail cycles: Spring storm season in North Richland Hills brings wind, hail, and falling limbs. We see bent gate panels, cracked hinge welds, and operators that shorted after water got into a damaged control box. The control box replacement is straightforward; the water damage is what makes it urgent.
Pricing for Gate Repair in North Richland Hills, TX
Gate repair labor in North Richland Hills runs $95 to $150 per hour, and most repairs fall within a half-day. Here is what that looks like in line items.
- Service call and diagnosis: $75, and that is credited toward the repair if you proceed
- Hinge replacement with post re-set: $600 to $1,200
- Weld and rust repair: $200 to $500 per repair area
- Sliding gate rack and track replacement: $450 to $900
- Gate operator replacement: $1,200 to $2,400
- Keypad or loop detector replacement: $250 to $600
Every job gets a written price before work starts, and that is the price you pay. The guarantee is in writing too, covering the repair for a full year. For a free estimate on any gate repair in North Richland Hills, call (469) 530-2485.
We Also Serve Cities Near North Richland Hills
Our Gate Repair crews cover the surrounding Tarrant County communities as well. If you are in Hurst, Haltom City, Bedford, or Colleyville, the same written pricing and full-year guarantee apply. This page is focused on North Richland Hills, but the standard does not change at the city line.
Serving North Richland Hills, TX – Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in North Richland Hills
Because the panel was never the cause. In North Richland Hills, expansive clay soil heaves and settles gate post footings through every wet-dry cycle, and unless the footing is re-poured and re-set, the post will move again and pull the gate out of line. A sag correction that only adjusts the panel will fail within a season here. We re-set the footing and re-hang the gate plumb so the latch lines up and the hinges stop taking the load. Call (469) 530-2485 to have a technician check your post footings.
Check the safety photocell and the reversal system. A properly installed gate operator in North Richland Hills has a photocell across the gate opening that stops and reverses the gate if anything breaks the beam, and the operator itself has a force-reversal setting that backs the gate off if it contacts an obstruction. We test both as part of every repair and every new installation, and we will show you the test result before we leave. If your gate does not reverse on contact, stop using it and call (469) 530-2485.
Yes. Our technicians are trained on all four of those brands, plus Linear, Viking, Ghost Controls, Elite, and Mighty Mule. We carry the common parts for LiftMaster and DoorKing specifically because they are installed on so many North Richland Hills homes, and we can source FAAC and BFT parts quickly when a board or arm needs replacing. Call (469) 530-2485 with the brand and model number, and we will tell you what is in stock.
Yes, and we usually do. When we are already on site for a gate repair in North Richland Hills, we check the keypad wiring, the loop detector threshold, and the safety photocell alignment as part of the job, not as a separate service call. If the keypad was never re-tested after a GFCI trip or a power surge, that is often the reason the gate will not open from the street even though the remote works. We replace or reprogram keypads and loop detectors in the same visit.
No, and for a good reason. A proper gate installation involves groundworks, concrete for the post footings, a 120V power run, safety edges, and reversal testing on the operator. That work is measured, ordered, and scheduled. We provide a free on-site measure and a written installation price, and we will give you a straight timeline for when the crew can start. Call (469) 530-2485 to schedule the measure.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving North Richland Hills under The Garrison Standard since 2008.