Gate Repair in San Jose - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across San Jose

Gate repair in San Jose typically runs $175 – $450 for common fixes like hinge replacement, track alignment, and limit switch adjustment. A full operator replacement on an automatic gate usually lands between $850 and $2,400 depending on the motor brand and whether new safety edges or a loop detector go in with it. Carver Gate Repair covers the whole San Jose area with background-checked, uniformed technicians who show up when they say they will, write the price down before any work starts, and leave the gate running right. Call (469) 530-2485 and you will talk to a person, not a dispatch service.

Call (469) 530-2485

We know San Jose gates. We know the iron swing gates in Willow Glen, the slide gates off Blossom Hill Road, the driveway operators in Berryessa and Cambrian that fail after a hot, dusty summer. More importantly, we know what breaks them and what fixes them for good.

Why Carver Gate Repair Is San Jose’s Preferred Gate Repair Company

Carver Gate Repair is part of the Garrison Partners family, and every San Jose job runs to The Garrison Standard: a written price before work begins, a written guarantee on every repair, and a free second visit if the repair fails within a full year. That guarantee is not a sales pitch. It is the 365-Day Done Right Promise, in writing, on every invoice.

Homeowners across San Jose have been burned by gate technicians who no-show, quote low and bill high, or leave the gate worse than they found it. That is the exact problem we built the company to solve. Our phones are answered by a live person 24 hours a day, 7 days a week, including weekends and holidays. No voicemail boxes, no call-back queues. When you call (469) 530-2485, you get a human.

Every technician dispatched in San Jose is background-checked and uniformed. You know who is walking through your gate before they arrive. And every repair, from a sagging iron hinge post to a dead FAAC operator board, comes with the same one-year written guarantee. Lonnie Burke leads the operation, and the standard he holds the San Jose crews to is the same one we have run on since 2008.

Iron Gate Repair in San Jose

Iron gate repair in San Jose is one of our most common calls, especially in neighborhoods like Willow Glen, Rose Garden, and Naglee Park where older homes still carry original ornamental iron. The work usually involves correcting a sag, replacing worn hinge pins or bearings, cutting out rusted sections of pipe or flat bar, and resetting the gate so it swings level. In San Jose’s clay-heavy soil, the real culprit is often below the surface: the hinge post itself has moved. We dig it out, pour a deeper footing with rebar and gravel, and reset the post before we touch the gate panel. Skip that step and the gate will sag again within a year.

Expect to spend $225 – $600 for iron gate repair in San Jose, depending on whether we are replacing hardware or resetting a post. A full weld repair with new pickets and a rust treatment can run $500 – $1,100. You get the written number before we start.

Hinge and post work on older iron gates

When an iron gate drags on the concrete, most homeowners assume the gate panel bent. In San Jose, more often than not the hinge post settled or heaved from expansive clay soil movement between wet winters and dry summers. We check the post first, because that dictates the real fix.

Weld and rust repair

San Jose’s dry season is not hard on iron the way coastal fog is, but sprinkler overspray against gate bottoms and dew cycles will still eat through paint and start rust. We grind the affected area, weld in new material where the metal has thinned, and finish it so the repair does not stand out.

Sliding Gate Repair in San Jose

Sliding gate repair in San Jose covers ground track alignment, roller and bearing replacement, guide post adjustment, and motor service on cantilever or tracked slide gates. A homeowner on Pine Avenue in Willow Glen had a 16-foot iron swing gate that drug on the concrete and tripped its LiftMaster operator every third cycle. We dug out the hinge post, found it had heaved nearly two inches from soil movement, poured a deeper footing with rebar, corrected the sag, and reset the operator so the swing gate cleared and reversed smoothly. We then walked the homeowner through testing the safety photocell and showed them the UL 325 entrapment protection working before we left. That is the process on every San Jose slide gate job too: fix the mechanical fault, then prove the safety system works.

Sliding gate repair in San Jose typically runs $180 – $480 for roller, track, and alignment work. If the motor has failed and needs replacement, budget $850 – $2,400 including the operator and installation. We match the replacement to the brand already on the job so the wiring and mounting work without field modifications.

Track and roller alignment

San Jose driveways with mature trees drop leaves, pollen, and fine dust into the track, which grinds rollers down faster than homeowners expect. When the rollers wear, the gate drags and the motor works harder until the limit switch trips. We clean the track, replace the rollers, and set the travel limits so the slide runs quietly again.

Manual release and operator reset

A slide gate stuck mid-travel after a dry-season voltage sag usually means the operator board lost its limits or the manual release was never engaged properly. We recalibrate, test the run cycle, and verify the safety edges reverse the gate under pressure.

Trusted Brands We Service in San Jose

Our San Jose technicians are trained on nine gate-motor brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common parts and boards in local stock for the San Jose market, which means a FAAC board swap or a Linear limit switch replacement does not have to wait on a distributor. Whether your slope driveway in the East Foothills runs on a Viking operator or your Cambrian property has a BFT slide system, we match the right parts to the equipment already installed. No cross-brand improvisation.

Common Gate Repair Problems We See in San Jose Homes

• Post heave on iron swing gates. San Jose’s clay soils expand in winter and shrink in summer, which pushes hinge posts out of alignment. We pour deeper footings with rebar and gravel in neighborhoods like Willow Glen and Cambrian than we would in Santa Clara or Sunnyvale because the soil here moves more.
• Operator board failure from voltage sag. Dry-season strain on the grid plus dust intrusion inside the control box kills boards. The gate stops mid-cycle or refuses to close. We diagnose, replace, and seal the housing against dust.
• Photocell and loop detector trips under tree cover. Driveways shaded by mature San Jose street trees send intermittent signals to loop detectors, so the gate reverses or refuses to close. We isolate the fault, replace the detector or realign the photo eyes, and test under conditions that reproduce the problem.
• Sagging slide gates that bind on the track. Worn rollers and dirt-packed tracks make the motor labor until the thermal overload shuts it down. We replace rollers, realign the track, and set the current-sensing limits so the operator stops fighting the gate.

Pricing for Gate Repair in San Jose, CA

We Also Serve Cities Near San Jose

Beyond San Jose, our crews cover Milpitas, Santa Clara, Sunnyvale, and Campbell. If your property sits near the border or you are not sure which service area covers your neighborhood, call (469) 530-2485 and we will let you know straight away. For more on what we do across the region, see our Gate Repair service page and our Gate Repair in San Jose city page.

FAQs About Gate Repair in San Jose