Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Farmers Branch, TX
Carver Gate Repair is the gate company homeowners in Farmers Branch, TX call when a gate stops opening, sags off its hinges, or needs a full replacement. We handle repair, installation, and motor work exclusively for gates and gate systems across the city. A broken gate in Farmers Branch is rarely a project you can put off: driveways here sit on flat, dense clay soil that shifts with North Texas weather, and heat plus rain cycles are tough on welded steel and underground wiring. Call us at (469) 530-2485 and a live person answers, day or night.
Why Farmers Branch Homes Are Different
Farmers Branch sits on the eastern edge of the DFW metro, northwest of Dallas proper, and its housing stock is older than most of its neighbors. Many homes here were built between the 1960s and 1980s, which means the gate at the driveway may be original equipment or a retrofit that never quite matched the property. Driveway gates on these lots tend to be either ornamental steel across a wide front entry or chain-link and tube-steel gates on side yards and alley-access properties. The soil here is a specific problem: expansive clay that swells in wet weather and shrinks in the August heat. Gate posts set in that soil drift over time, and we regularly see gates in Farmers Branch where the post has moved just enough that the latch no longer lines up or the gate drags the ground at the far end.
The city also has a strong code enforcement presence and a number of HOA communities, including areas off Valley View Lane, Josey Lane, and Marsh Lane. If you live in an HOA, the gate style, height, and color are usually not up to you alone. Before any installation, we recommend confirming what your governing documents allow. For repair work, the scope is almost always approved without review. For new gates, knowing the rules early prevents a completed job from turning into a compliance headache.
Our Main Farmers Branch Services
These are the three services Farmers Branch homeowners call us for most. Each has its own page with pricing, common failures, and what the job involves.
Gate Repair in Farmers Branch
Most repair calls in Farmers Branch come down to a gate that no longer swings or slides cleanly. Hinges wear out, posts lean, wheels seize, and the gate frame itself can twist in the summer heat. We also see a lot of latch and lock failures on older ornamental gates, where the original hardware was never meant to survive 40 years of Texas sun. Every repair starts with a written price before any work begins, and every repair carries a written one-year guarantee. Learn more about what we fix on our Gate Repair in Farmers Branch page.
Gate Installation in Farmers Branch
A new gate in Farmers Branch has to be built for the soil it stands on. We set posts deeper than the minimum, account for clay movement, and match the gate to the existing fence line so the result looks like it was always there. Whether you are replacing a driveway gate on a property along Brookhaven or adding a side-yard gate to an older ranch-style home, the process starts with measurements and a written quote. See what a full installation includes at our Gate Installation in Farmers Branch page.
Gate Motor Repair in Farmers Branch
When a motorized gate stops working, the failure is usually in the operator, the limit switch, or the loop detector buried in the driveway. We carry parts for all major brands and diagnose the specific fault before recommending a repair or replacement. Farmers Branch sees plenty of phantom operation issues after storms, when water intrusion trips sensors or shorts wiring. Our Gate Motor Repair in Farmers Branch page covers common motor failures and what motor service costs in this market.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Farmers Branch
We work on Linear, Viking, Ghost Controls, and DoorKing systems, among others. Parts for these brands are stocked locally, so most repairs in Farmers Branch are completed the same visit rather than waiting on a shipment. See our brands for the full list of equipment we service.
Pricing for Gate Company in Farmers Branch, TX
| Service | Typical range in Farmers Branch |
|---|---|
| Gate repair (minor) | $150 – $350 |
| Gate repair (major structural) | $400 – $900 |
| Gate installation (standard residential) | $1,800 – $4,500 |
| Gate installation (custom steel or driveway) | $5,000 – $12,000 |
| Gate motor repair (limit switch, wiring, sensor) | $180 – $400 |
| Gate motor replacement (operator unit) | $800 – $1,900 |
| Loop detector repair or replacement | $250 – $600 |
| Hinge and roller replacement | $120 – $300 |
| Post reset or reinforcement | $300 – $750 |
| Full system replacement (gate, motor, hardware) | $2,500 – $6,500 |
In Farmers Branch, the biggest price drivers are gate width, the condition of the posts, and whether the existing motor can be salvaged. Clay soil movement adds cost when posts need to be dug out and re-set in fresh concrete. Whatever the scope, you receive a written price before any work starts, and that number does not change at the door.
Neighborhoods We Serve in Farmers Branch
We work across Farmers Branch, from the older subdivisions near the Dallas border to the newer developments along the northern edge of the city.
- Brookhaven
- Mimosa Park
- Liberty Park
- Chase Crossing
- Areas off Valley View Lane and Josey Lane
Response time for most Farmers Branch calls is same-day when we are called before early afternoon. Jobs that require parts we do not have on the truck are scheduled next-day in nearly every case.
Service Area – Cities Near Farmers Branch
Carver Gate Repair serves Farmers Branch as its home base, with scheduling and dispatch coordinated from our Dallas-Fort Worth office. We also cover nearby cities for gate work: Dallas, TX and Fort Worth, TX are within normal dispatch range, and we serve major Texas metro areas including Houston, TX and San Antonio, FL through our network.
Serving Farmers Branch, TX – Our Local Coverage Area
We’re based in the Farmers Branch area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Farmers Branch
Same-day dispatch is available for most repair calls placed before mid-afternoon. Jobs needing parts we do not stock on the truck are typically scheduled next-day. We do not use voicemail for incoming calls, so a live person confirms your window when you call.
Repairs and motor replacements generally do not require approval. A new gate or a change to gate height, style, or color often does. Check your HOA documents before installation, and we will build to whatever the approved specification requires.
Most gate repairs and replacements do not require a city permit in Farmers Branch. When a project does require one, we flag it during the quote and include permit coordination in the written price. You will know before work starts, not after.
For gate repair, installation, or motor service in Farmers Branch, call (469) 530-2485. A live person answers, you get a written price before any work begins, and every repair is covered by a written one-year guarantee.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Farmers Branch Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.