Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Mission Bend, TX
Gate work in Mission Bend comes down to three calls we handle every week: a swing gate that won’t close, a slide gate grinding to a stop, or a motor that hums but won’t move the gate. Most of the homes here sit on modest lots with back-alley garage access and gates that see real use multiple times a day, so failures tend to be wear-related rather than freak accidents. The climate works against gate hardware, too. Heat, humidity, and sudden downpours push limit switches out of adjustment and corrode connections faster than homeowners expect. If your gate has started slowing down, sagging, or stalling, call (469) 530-2485 and we’ll give you a written price before any work begins.
Why Mission Bend Homes Are Different
Mission Bend’s housing stock leans heavily toward 1970s and 1980s construction, which means gate systems are rarely original equipment. Most were added later, often with mixed-brand components and wiring runs that don’t match modern code. We see a lot of retrofitted swing operators on posts that predate the gate itself, and that mismatch creates alignment problems no manufacturer’s manual accounts for.
The soil here is another factor. Houston-area clay expands and contracts through wet and dry seasons, and gate posts set in that soil can shift half an inch in a year. A gate that swung fine in May might drag the latch in September. We check post alignment and hinge wear on every repair call because that’s the difference between a fix that lasts a year and one that lasts a month.
Flooding and drainage also shape the work. Low spots near Mason Creek and the surrounding bayous mean some gate operators sit in standing water after heavy rain. Sealed motors and elevated control boxes are common-sense upgrades we recommend on replacements in Mission Bend. If you live off Beechnut or in the neighborhoods south of Bellaire, pay attention to how water pools at your gate after a storm. That tells us a lot before we open a single panel.
Our Main Mission Bend Services
Most Mission Bend calls start with one of three jobs: a gate that stopped working, a gate that needs to be replaced, or a motor that runs but won’t drive the gate. Each has its own page below with the Mission Bend specifics.
Gate Repair in Mission Bend
We rebuild sagging hinges, true up misaligned posts, weld broken frames, and replace worn wheels on slide gates. In Mission Bend, the most common repair is a swing gate that has dropped on the latch side, usually from post movement in clay soil. We reset the hinges, straighten the gate, and check the operator’s travel limits so the motor isn’t fighting the gate every cycle. Learn more about Gate Repair in Mission Bend.
Gate Installation in Mission Bend
A new gate in Mission Bend starts with measuring the opening, checking post depth and soil condition, and selecting a frame gauge that suits our climate. We install steel and aluminum gates sized to the driveway, then set the operator so the gate moves without strain. HOA guidelines in some Mission Bend subdivisions require matching materials or finish styles, something we check before ordering. Read about Gate Installation in Mission Bend.
Gate Motor Repair in Mission Bend
When the motor runs but the gate doesn’t move, the problem is usually a worn drive gear, a failed capacitor, or a limit switch that lost its setting. Humidity accelerates corrosion on control boards across Mission Bend, particularly for gates that face south and catch afternoon storms. We diagnose the motor on-site, quote a written price, and stock replacement boards and arms from the brands in Gate Motor Repair in Mission Bend.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Mission Bend
We carry parts for Linear, Viking, Ghost Controls, and DoorKing on our trucks serving Mission Bend. That means most motor and control-board replacements we quote can be installed the same visit. For less common parts, turnaround is usually one to two business days. See the full list on our brands page.
Pricing for Gate Company in Mission Bend, TX
| Service | Typical range in Mission Bend |
|---|---|
| Gate repair (labor and parts) | $225 – $475 |
| Full gate replacement | $1,800 – $3,800 |
| Gate motor repair | $250 – $520 |
| Gate motor replacement | $825 – $1,750 |
| Swing gate installation | $2,100 – $4,200 |
| Slide gate installation | $2,800 – $5,500 |
| Gate opener troubleshooting | $140 – $260 |
| Limit switch replacement | $165 – $310 |
| Control board replacement | $320 – $680 |
| Hinge replacement (pair) | $180 – $390 |
Prices shift upward in Mission Bend when a gate post has heaved out of plumb and needs to be reset, or when a motor sits in a low spot that collects water and the whole mounting has to be raised. Whatever the number is, you’ll have it in writing before we start. It doesn’t move at the door.
Neighborhoods We Serve in Mission Bend
We work throughout Mission Bend, including the older subdivisions east of Highway 6 and the newer-built streets west near Addicks. Response time across the area is typically same-day for repair calls, with a scheduled window for installations.
- Mission Bend South
- Mission Bend North
- Mission Green
- Village of Mission Bend
- Near Mission West
Service Area – Cities Near Mission Bend
Beyond Mission Bend, our Houston dispatch covers Houston, TX and the surrounding metro, including Dallas, TX and Fort Worth, TX for planned installation work. We also route calls from San Antonio, FL for seasonal residents who need gate work before returning home.
Serving Mission Bend, TX – Our Local Coverage Area
We’re based in the Mission Bend area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mission Bend
Repair calls in Mission Bend are typically same-day when you call before 2 p.m. A live person answers at (469) 530-2485, and we’ll give you a window and a written price before work begins.
Some Mission Bend subdivisions require approval before a gate replacement if the material or finish differs from the original. We’ll note what’s existing and help confirm the requirement applies, but the HOA filing itself is handled by the homeowner.
Yes. Installations are measured, quoted, and scheduled. We don’t promise same-day installs, but we do provide a written price after a free measure so there’s no surprise when the crew arrives.
Contact Carver Gate Repair in Mission Bend
Call (469) 530-2485 for a free estimate on any gate repair, motor replacement, or installation in Mission Bend. Our crew follows The Garrison Standard on every job: background-checked, uniformed technicians, a written price before work starts, and a full-year guarantee on every repair. If it’s not done right, we come back and make it right. No charge, no argument.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mission Bend Customers Say
"Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.