Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Selma, CA
Carver Gate Repair is the gate company Selma homeowners call when a gate stops opening, a motor burns out, or a new gate needs to be installed the right way the first time. We carry parts for four of the most common gate-motor brands in the Central Valley, and every job starts with a written price before any work begins. If you’re dealing with a gate that won’t budge or a motor that hums and stalls, call (469) 530-2485 and you’ll get a live person, not a voicemail box.
Why Selma Homes Are Different
Selma sits in the heart of the San Joaquin Valley, where summers regularly push past 100 degrees and the soil shifts with irrigation cycles common to the region’s vineyards and orchards. That combination of heat and ground movement is hard on gate equipment. We see more swing gates drift out of alignment here than in coastal areas, because the clay-heavy soil expands and contracts through the growing season. Post footings that were adequate ten years ago are often the reason a gate drags or binds today.
The housing stock varies, from older homes near downtown with narrow driveway aprons to newer subdivisions with wider double-swing gates. Older properties sometimes have gates installed decades ago with undersized operators, while newer construction favors sliding gates on steel track. Both types need different repair approaches, and we plan for that before we arrive. Selma’s residential streets are generally accessible for our service trucks, and most repairs are completed in a single visit.
Our Main Selma Services
Most calls from Selma homeowners are for gate repairs that have become urgent, followed by motor replacements and new gate installations. Here’s how each service works in this area.
Gate Repair in Selma
When a gate stops opening or starts grinding, the cause in Selma is usually alignment, a worn hinge, or a limit switch that has lost its setting. We diagnose the specific failure, show you the problem, and give you a written price before we turn a wrench. Gate Repair in Selma covers everything from sagging gates to broken wheels to chain-drive systems that have stretched or slipped. Our technicians are background-checked and uniformed, so you know who’s walking up your driveway.
Gate Installation in Selma
New gate installation in Selma starts with measuring your driveway, checking the ground slope, and confirming what kind of operator will handle the gate’s weight and length. We install swing and slide gates, set posts in concrete, and make sure the gate travels cleanly before we leave. Gate Installation in Selma is quoted as a complete job, not a running meter. You’ll get a written price for the full scope before any work starts.
Gate Motor Repair in Selma
A gate motor that hums but doesn’t move, or one that opens a foot and reverses, is usually a capacitor, a limit switch, or a board fault. We work on Linear, Viking, Ghost Controls, and DoorKing motors, among others. Gate Motor Repair in Selma is handled with the right replacement parts on the truck, which means fewer return trips and a gate that works when we leave. Every motor repair carries our written one-year guarantee.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Selma
We stock parts for Linear, Viking, Ghost Controls, and DoorKing systems, which covers a large share of the motors installed across Selma. Common replacement parts – limit switches, capacitors, remotes – are kept on the truck, so most repairs are completed same-day. See our brands for the full list we service.
Pricing for Gate Company in Selma, CA
| Service | Typical range in Selma |
|---|---|
| Gate repair, general | $150 – $400 |
| Gate motor repair | $250 – $600 |
| Gate motor replacement | $600 – $1,500 |
| Limit switch replacement | $120 – $280 |
| Loop detector replacement | $250 – $450 |
| Remote programming | $75 – $150 |
| Hinge replacement | $150 – $350 |
| Gate wheel or track repair | $180 – $420 |
| Full gate installation (single swing) | $1,200 – $3,500 |
| Gate controller board replacement | $300 – $700 |
In Selma, prices can run higher when a gate has shifted off its posts from soil movement and needs realignment before repairs can hold. The number you agree to is the number you pay – we quote the job in writing before any work starts, and if it’s not done right, we come back at no charge under our 365-Day Done Right Promise.
Neighborhoods We Serve in Selma
We dispatch to every part of Selma, from the older grid streets near downtown to the newer developments on the south and east sides. Our technicians know the area and don’t need turn-by-turn directions from the freeway to your driveway.
- Downtown Selma and the historic core
- East Selma residential subdivisions
- Southeast Selma and newer track communities
- West Selma near the 99 corridor
- Foothill fringe properties east of town
In most cases, we can reach a Selma address within 60 to 90 minutes for urgent gate repairs during business hours.
Service Area – Cities Near Selma
Carver Gate Repair serves Selma and the smaller farm communities around it, including Fowler, CA, Parlier, CA, Kingsburg, CA, and Reedley, CA. Dispatch for this area is coordinated from our Fresno, Central Valley office, and crews travel to your gate from there.
Serving Selma, CA – Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Selma
During business hours, most Selma addresses can be reached within 60 to 90 minutes. If your gate is stuck open and you can’t secure the property, call (469) 530-2485 and we’ll tell you exactly when a technician will arrive.
A complete installation includes site measurement, post setting, gate mounting, operator installation, and travel testing. You get a written price covering the entire scope before work begins, so there are no surprise line items at the end of the job.
In most Selma residential areas, replacing an existing gate on the same footprint does not require a permit. If your project changes the driveway layout or adds a new operator with electrical service, we’ll walk you through what the city may need.
If your gate won’t open, your motor is failing, or you’re ready to price a new installation, call Carver Gate Repair at (469) 530-2485. A live person answers, we schedule around your day, and you’ll have a written price in hand before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Selma Customers Say
"Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H.