Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Murphy, TX
Gate repair in Murphy, TX usually comes down to one of three jobs: a gate that won’t open, a motor that quit, or a new gate and operator from scratch. Most Murphy homes were built between the late 1990s and 2010s, which means a lot of original gate equipment is now 15 to 25 years old and failing at the same points: limit switches, control boards, and hinge welds. We work on all of it. Call (469) 530-2485 and a live person answers, day or night.
Why Murphy Homes Are Different
Murphy sits on the heavy clay soils of Collin County, and that clay expands and contracts with every wet-dry cycle. Gate posts set in that soil drift over time. A gate that swung clean in 2019 now drags or binds because the post moved a quarter inch. We see it on Timber Ridge, Maxwell Creek, and Rolling Ridge alike. The fix is rarely just a hinge adjustment. It’s re-shimming the post, checking the operator’s travel limits, and often repositioning the limit switch so the motor stops fighting the gate.
The other Murphy factor is heat. July and August push 100 degrees for weeks, and gate operators mounted in direct sun run hot. Capacitors fail. Control boards warp. Solar-powered openers on perimeter gates lose charging efficiency when panels sit under pollen and dust. A gate that works fine all spring may die in August because the motor overheated a thermal fuse that was already marginal. Our technicians ride with the common failure parts for the brands most installed around Murphy, so the typical repair is a single visit.
Our Main Murphy Services
Murphy homeowners call us most about two things: a gate that stopped mid-swing, and a motor that hums but won’t move. Here’s what each job involves here.
Gate Repair in Murphy
A Murphy gate repair usually starts with steel hardware: hinge bolts rusted or sheared, a weld cracked at the frame, or a caster wheel worn flat from dragging across a shifted driveway. We inspect the full gate path, not just the visible break. Clay-soil post movement is common here, so part of almost every repair is checking whether the gate still swings true. We quote a written price before we touch anything. Full details are on the Gate Repair in Murphy page.
Gate Installation in Murphy
New gate installations in Murphy begin with a site measure, because post depth has to account for Collin County clay. We set posts below the active soil zone and pour against undisturbed earth, which keeps the gate plumb through wet springs and dry summers. We also map the power run early, since many Murphy backyards were never pre-wired for a gate operator. The Gate Installation in Murphy page covers the process and what to expect before the crew arrives.
Gate Motor Repair in Murphy
Motor failures in Murphy follow a pattern: thermal damage from summer heat, capacitor failures, and limit switches that drifted out of adjustment. We bench-test the board before condemning the motor, because a dead capacitor costs far less than a full operator swap. If the motor is beyond repair, we quote a replacement that matches the existing mount so the job doesn’t turn into a rebuild. See Gate Motor Repair in Murphy for the specifics on operator brands we service.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Murphy
We dispatch with parts for the brands most common on Murphy gates: Linear, Ghost Controls, and Viking. If your system is a DoorKing or something less common, we order the part and schedule the return visit, usually within a few days. The full list of what we work on is on our brands page.
Pricing for Gate Company in Murphy, TX
Here are the gate services Murphy homeowners request most, with the range you should expect before any diagnostic work begins. Every price is quoted in writing before we start.
| Service | Typical range in Murphy |
|---|---|
| Gate repair (general hardware, hinge, weld) | $180 – $340 |
| Gate motor repair (capacitor, limit switch, board) | $220 – $410 |
| Full gate motor replacement (operator only) | $650 – $1,400 |
| Gate installation (single swing gate, standard yard) | $1,400 – $2,800 |
| Gate installation (double swing or driveway gate) | $2,600 – $4,800 |
| Sliding gate installation | $3,200 – $6,000 |
| Hinge replacement (pair, standard weight gate) | $260 – $420 |
| Caster wheel or guide replacement | $280 – $390 |
| Solar panel or battery replacement | $340 – $590 |
What pushes a price up in Murphy? Post replacement in expansive clay is the big one. If a post has shifted or rotted, we’re digging and setting new concrete, and that’s a different job than swapping a hinge. The other variable is operator compatibility: some older Murphy gates were built around proprietary mounts, and retrofitting a modern motor takes an adapter plate and extra wiring time. Whatever the scope, the number we quote before we start is the number on the invoice.
Neighborhoods We Serve in Murphy
We cover the full Murphy city limits and the immediate edge streets where Collin County addresses overlap. Our dispatchers know which neighborhoods route through which gate or access road, and we’ll confirm the exact arrival window when you call.
- Maxwell Creek
- Timber Ridge
- Rolling Ridge
- Murphy Farms
- Skyline Estates
Typical response in Murphy is same-day or next-morning for repairs, depending on call volume and the time of day you reach us.
Service Area – Cities Near Murphy
We also run calls in neighboring cities across the metro. If you’re just outside Murphy, we’ll route the nearest available technician. Our service area includes Dallas, TX, Fort Worth, TX, and Houston, TX for larger projects, plus San Antonio, FL for our Florida-based customers.
Serving Murphy, TX – Our Local Coverage Area
We’re based in the Murphy area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Murphy
Same-day in most cases. We dispatch from our Dallas-Fort Worth office and keep technicians routed through Collin County daily. If your gate is stuck open and you need it secured tonight, call (469) 530-2485 and we’ll tell you exactly when a tech can be there.
It depends on your subdivision. Some Murphy HOAs require written approval for gate style changes or new installations, while repairs to existing gates usually don’t need review. Check your covenants first, and we’ll match the existing style when replacement is needed.
Every repair carries a written guarantee good for a full year from the date of service. If the same repair fails within that window, the second visit is free. The guarantee is in writing, on the invoice, before you pay.
If your gate won’t move, won’t latch, or won’t stop where it should, call (469) 530-2485 for a free estimate. A live person answers.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Murphy Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.