Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Lakeway, TX
Gate work in Lakeway isn’t the same as gate work in a flat Austin subdivision. Homes here sit on Hill Country slopes, limestone ledges run shallow under the soil, and driveways often climb or curve before they meet the house. That changes how a gate gets hung, how a motor gets mounted, and how long a repair actually lasts. We’re Carver Gate Repair, and every Lakeway job runs on The Garrison Standard: a written price before work starts, a background-checked technician on site, and a written guarantee on every repair. If your gate is acting up, call (469) 530-2485 and you’ll get a live person, day or night.
Why Lakeway Homes Are Different
Lakeway is built into the western edge of the Hill Country, and the terrain is the first thing we account for on any gate job. Many driveways slope toward the house or angle off the street, which means a gate that sags even an inch will drag on the uphill side. We set posts and hinge points with that slope in mind, not to a level that looks right from the curb.
The soil is the second factor. Limestone sits close to the surface across much of Lakeway, and that affects post depth and anchoring. A gate post set in shallow rock without proper work will shift within a season. We dig and anchor for the ground we actually find, not the ground a generic install assumes.
Homeowners here also deal with HOA architectural rules more than in most Austin-area communities. Lakeway has active deed restrictions, and many sections require board approval before a new gate or a gate style change goes in. We’ll tell you upfront what your HOA likely needs and build the gate to those standards the first time.
Climate matters too. Summer heat in Lakeway is hard on motors and control boards, and the limestone dust that kicks up in dry months works its way into gear tracks and limit switches. A motor that survives fine in coastal air will cook here if it isn’t rated for sustained heat. We match the equipment to that reality.
Our Main Lakeway Services
Most Lakeway homeowners call us for one of two reasons: a gate that stopped opening, or a gate that was never installed right to begin with. Both are jobs we handle every week in this city. Here’s what each one involves here.
Gate Repair in Lakeway
A Lakeway gate repair usually comes down to one of three things: a hinge or post that shifted with the soil, a motor or control board that failed in the heat, or a gate that was cut too tight for the slope and now binds. We diagnose the actual cause, quote you a written price, and fix it the same visit if parts are on the truck. Most common repair parts are stocked on our vehicles. See Gate Repair in Lakeway.
Gate Installation in Lakeway
Installing a gate in Lakeway means working with the Hill Country ground, not fighting it. We measure the driveway slope, check for rock, confirm the HOA requirements, and only then spec the gate and operator. Every installation includes a written price before any work starts, and the gate is hung to open cleanly through the full swing arc on your specific grade. Details are on the Gate Installation in Lakeway page.
Gate Motor Repair in Lakeway
When a motor quits in Lakeway, it’s usually the limit switch, a control board, or a gear worn past tolerance from years of Hill Country dust and heat. We carry parts for the major motor brands and can typically diagnose and repair in one trip. If the board is fried, we’ll show you the failed component and give you a written replacement price before touching anything. More on Gate Motor Repair in Lakeway.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lakeway
We work on Linear, Viking, Ghost Controls, and DoorKing equipment regularly in Lakeway, along with five other major gate-motor brands. Common parts for these systems stay stocked on our trucks, which is why most motor repairs in the Lakeway area are completed in a single visit. See our brands for the full list.
Pricing for Gate Company in Lakeway, TX
| Service | Typical range in Lakeway |
|---|---|
| Gate motor repair | $180 – $340 |
| Gate motor replacement | $650 – $1,300 |
| Control board replacement | $350 – $800 |
| Limit switch replacement | $120 – $250 |
| Hinge replacement | $150 – $400 |
| Gate alignment and tracking | $100 – $250 |
| Welding repair | $150 – $500 |
| Operator arm repair or replacement | $300 – $700 |
| Driveway gate installation | $2,500 – $8,000 |
What pushes a Lakeway job toward the upper end of these ranges is usually the ground: rock drilling for posts on a limestone ledge adds labor, and a steep driveway adds complexity to the install. Whatever the number, you get it in writing before any work begins, and that number does not move at the door.
Neighborhoods We Serve in Lakeway
We work across the entire Lakeway area, from the original sections near Lake Travis to the newer builds west of 620. Response time is typically same-day for repair calls, and next-day at the latest for scheduled measurement jobs.
- The Hills of Lakeway
- Rough Hollow
- Lakeway Highlands
- Flintrock Falls
- The Hollows
Service Area – Cities Near Lakeway
Our Austin dispatch covers Lakeway and the surrounding Hill Country communities. If your property falls outside the Lakeway boundary, we also serve Houston, TX, San Antonio, FL, Dallas, TX, and Fort Worth, TX through our partner locations.
Serving Lakeway, TX – Our Local Coverage Area
We’re based in the Lakeway area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lakeway
Most repair calls in Lakeway are scheduled same-day when you call before early afternoon. Emergency calls for a gate stuck open or closed are answered by a live person 24/7 and dispatched as quickly as a technician can reach your location. Call (469) 530-2485 for a real ETA, not a call-back.
In most Lakeway sections, yes. Architectural review is common for new gates and for changes to gate style, height, or material. We’ll help you understand what your specific HOA requires before you spend money, and we build to the standard they will approve.
No. You receive a written price before any work begins, and that is the number on the invoice unless you add scope mid-job and approve a new written price for the change. The Garrison Standard applies to every Lakeway job, and moving the number at the door is not how we operate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lakeway Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.