Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in White Settlement, TX
Gate work in White Settlement runs into two things more than anywhere else: heat that bakes exposed motors and hinges, and lots built tight enough that a gate has to earn its footprint. When a swing gate sags or a slide gate jumps its track, it usually needs somebody who can diagnose it on-site, price it in writing, and fix it without a second visit. That’s the job we do. If you need Gate Repair in White Settlement, a new install, or a motor that will not respond, call us at (469) 530-2485 and describe what the gate is doing and we’ll tell you what it likely needs.
Why White Settlement Homes Are Different
White Settlement is dense for a Fort Worth-area city. The older streets north of I-30, around Saddle Hills and the neighborhoods off Las Vegas Trail, were built before automated gates were common, so many homeowners are retrofitting swing operators onto driveway widths that were laid out for a single car and a fence. That changes the hardware: a shorter gate leaf puts more strain on the hinge post, and a narrow driveway means the operator arm has less room to swing. We account for both when we quote.
Summer heat is the other constant. North Texas routinely sees 100-degree days in July and August, and a black steel gate sitting in direct sun can get hot enough to cook a control board inside a plastic housing. Capacitors swell. Limit switches drift. Gearboxes lose their grease faster than the manufacturer’s schedule assumes. Homes in White Settlement also sit on the same expansive clay soil that runs through Tarrant County, and that clay moves with rain and drought. A gate that was perfectly level in May can bind against the latch post by August. None of this is exotic – it just means the work has to account for the local ground and the local sun.
Our Main White Settlement Services
Most calls we get in White Settlement fall into three buckets: a gate that stopped moving, a gate that was never automated and the owner wants it done, or a motor that runs but does not move the gate correctly. Each has its own page below with pricing and the specific jobs involved.
Gate Repair in White Settlement
A repair call usually starts with something obvious: the gate drags on the ground, the hinge pulled out of the post, or a weld broke at a stress point. We bring the gate back to level, rebuild or replace the hinges, and reinforce the post if the soil movement in White Settlement has loosened it. On welded steel gates, we cut out the cracked section and weld in new material rather than patching over it. Full details are on the Gate Repair in White Settlement page, including what a same-day repair typically costs and what pushes a job into a rebuild.
Gate Installation in White Settlement
A new gate on an existing driveway means measuring the actual opening, checking the ground for slope, and deciding whether the posts need concrete footings below the clay line. White Settlement lots often have utility easements along the side yard, so we verify placement before digging. The gate itself is built to the width and height we measure, not ordered from a catalog and adapted on-site. See Gate Installation in White Settlement for what is included in the job and what typical projects run.
Gate Motor Repair in White Settlement
When the motor hums but the gate does not move, or the gate reverses for no reason, the problem is usually in the operator rather than the gate itself. Limit switches, control boards, loop detectors, and the arm or chain drive all fail in predictable ways, and the heat in White Settlement accelerates some of them. We match the repair to the specific motor model rather than swapping in a generic part. The Gate Motor Repair in White Settlement page lays out common failures and what they cost to fix.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in White Settlement
We work on the systems most common in White Settlement driveways, including Linear, Viking, DoorKing, and Ghost Controls. Parts for older Linear and DoorKing boards are kept in rotation because those units are everywhere in Tarrant County and waiting on a distributor costs days. See our brands for the full list of what we’re trained on.
Pricing for Gate Company in White Settlement, TX
| Service | Typical range in White Settlement |
|---|---|
| Gate repair, minor (hinge adjustment, latch realignment, weld touch-up) | $150 – $350 |
| Gate repair, major (post reset, full hinge replacement, section rebuild) | $400 – $900 |
| Gate motor / operator repair | $225 – $650 |
| Control board replacement | $350 – $750 |
| Limit switch or sensor replacement | $150 – $300 |
| Swing gate installation (single leaf, manual) | $1,200 – $2,800 |
| Slide gate installation (manual, on track) | $1,800 – $3,800 |
| Gate operator installation (motor, arm, controls) | $900 – $2,500 |
| Loop detector installation (vehicle exit sensor) | $400 – $900 |
| Full automated gate package (gate + motor, basic) | $2,500 – $5,500 |
White Settlement jobs run higher when there is post damage from soil movement, or when an old operator has to be replaced entirely rather than repaired. Either way, you get the written price before we start, and that number does not change at the door.
Neighborhoods We Serve in White Settlement
We cover the whole city, from the older streets near Bomber Road and the neighborhoods around Las Vegas Trail, to the newer developments east of Cherry Lane and the homes along Saddle Hills. We do not route by zip code; if you are in White Settlement city limits, we come out.
- Saddle Hills
- Central White Settlement (near Las Vegas Trail)
- Cherry Lane corridor
- Westworth Village-adjacent streets
- Bomber Road area
Service Area – Cities Near White Settlement
If your gate is outside White Settlement city limits, we also cover nearby markets. See Dallas, TX, Fort Worth, TX, San Antonio, FL, or Houston, TX for details in those areas. Scheduling for all of them runs through our Dallas-Fort Worth office.
Serving White Settlement, TX – Our Local Coverage Area
We’re based in the White Settlement area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in White Settlement
We schedule service calls across White Settlement every weekday and keep room for same-day repair visits when the morning schedule allows. A gate stuck open is a call we treat as urgent. Call (469) 530-2485 and we’ll give you a straight answer on the window.
Most gate repairs do not require a permit in White Settlement. New installations with concrete footings or electrical work may need city approval depending on scope. We tell you before the job starts if yours falls into that category, and we handle the paperwork when it does.
We cover all of White Settlement and the surrounding Tarrant County area. If you are in an unincorporated pocket near the city or in a neighboring town, call us and we’ll confirm coverage. The service area above lists the main cities where we run crews.
If your gate in White Settlement needs attention, call (469) 530-2485 for a written price and a straight answer. A real person picks up.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What White Settlement Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.