Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Trophy Club, TX
Gate work in Trophy Club runs on the town’s own rhythm: master-planned streets, HOA standards that get enforced, and a lot of iron and steel sitting in full Texas sun. We’re Carver Gate Repair, and we handle swing gates, slide gates, and the motors that drive them across Trophy Club. If your gate is sagging, binding, or refusing to open, call (469) 530-2485 and a live person answers. Every job starts with a written price, and every repair carries a written guarantee good for a full year.
Why Trophy Club Homes Are Different
Trophy Club sits on the northeast edge of the DFW metro, and the housing stock reflects that. Many properties were built between the late 1970s and mid-2000s, which means a mix of original ornamental steel gates now thirty or forty years old, newer aluminum frames, and a growing number of custom driveway gates custom driveway gates on larger lots along Trophy Club Drive and Indian Creek. Clay soil is the quiet variable. Trophy Club ground shifts with wet-dry cycles, and a gate post set in that soil can drift out of plumb over a few seasons. That drift shows up as a gate that scrapes the driveway, a latch that no longer catches, or a swing operator that strains against its own hinges.
HOA oversight matters here. Trophy Club is one of the more actively managed communities in the area, and visible gate repairs often need to match existing ironwork or comply with community design rules. We work with that reality, not against it: repairs that blend with the original style, wiring that stays concealed, and a clean site when we leave. The climate adds heat and occasional hailstorms that can dent panels or knock sensors out of alignment, so we inspect the full gate path rather than just replacing the one part that failed.
Our Main Trophy Club Services
Three services carry most of the calls from Trophy Club homeowners: structural gate repair, full gate installation, and motor-only work on the operator system. Each has its own page with pricing, process, and what to expect.
Gate Repair in Trophy Club
Most gate repair calls in Trophy Club involve a gate that has drifted on its hinges, scrapes against the driveway, or no longer latches cleanly. We realign the frame, replace worn hinges and rollers, repair or replace cracked welds, and adjust the latch so it closes without slamming. On wood gates, we check for rot at the base where sprinkler overspray keeps things damp. On steel gates, we look for rust at the weld points. Every repair is quoted in writing before we touch a tool, and the repair is covered by the 365-Day Done Right Promise. Full detail is on our Gate Repair in Trophy Club page.
Gate Installation in Trophy Club
New gate installations in Trophy Club mean a site measure first. We check the driveway slope, the post depth, and what the HOA requires for height and finish. Then we build the gate to fit the opening, set posts below the frost line and into stable soil, and hang the gate so it swings or slides without drag. We install swing gates, slide gates, and pedestrian gates, and we can match custom ironwork to an existing fence line. The written quote includes the gate, hardware, installation, and cleanup. Read the full scope on our Gate Installation in Trophy Club page.
Gate Motor Repair in Trophy Club
When the gate itself is fine but the motor won’t respond, the problem is usually in the operator: a failed limit switch, a worn gear, a loop detector that no longer trips, or a control board that has given up after years of Texas heat. We diagnose the motor system on site, explain what failed and why, and replace only what needs replacing. We work on Viking, Ghost Controls, DoorKing, and Elite operators, among others, so we generally have the right board or arm in stock for same-visit repair. Most motor diagnostics and repairs are quoted the same day. Our Gate Motor Repair in Trophy Club page breaks down the work and typical pricing.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Trophy Club
We service the gate motor brands most often installed across Trophy Club, including Viking, Elite, and Ghost Controls. Parts for these systems are stocked locally, so a swing-arm failure or a burned control board doesn’t turn into a week-long wait. If your gate’s brand isn’t on the list, call anyway – we work across the major operators. See our brands for the full lineup.
Pricing for Gate Company in Trophy Club, TX
| Service | Typical range in Trophy Club |
|---|---|
| Gate alignment and hinge adjustment | $140 – $285 |
| Weld repair on steel gate frame | $165 – $340 |
| Latch or lock replacement | $95 – $220 |
| Gate post reset (single post) | $250 – $475 |
| Slide gate roller replacement | $160 – $310 |
| Swing gate operator (motor) replacement | $650 – $1,200 |
| Control board replacement | $220 – $460 |
| Loop detector replacement | $180 – $350 |
| Full driveway gate installation | $2,800 – $7,500 |
Prices in Trophy Club shift with the job: a gate on a sloped driveway takes more time to align than one on flat ground, and custom ironwork or HOA-mandated finishes add cost. What doesn’t change is the process. We quote every job in writing before work starts, and that number holds. No discovery charges, no “while we’re here” additions.
Neighborhoods We Serve in Trophy Club
We work throughout Trophy Club, from the streets off Trophy Club Drive to the neighborhoods along Indian Creek and the golf-course-adjacent lots. Response time across Trophy Club is typically same-day or next-day for repair calls, depending on the schedule when you ring.
- Indian Creek
- Trophy Club Country Club area
- Hills of Trophy Club
- The Highlands
- Solana Vista
Service Area – Cities Near Trophy Club
Our Trophy Club crews also cover the surrounding metro. If you’re just outside town, you can still reach a live person at the same number. We route calls from nearby areas through our Dallas-Fort Worth scheduling office and dispatch locally. Nearby pages: Fort Worth, TX, Dallas, TX, Houston, TX, and San Antonio, FL.
Serving Trophy Club, TX – Our Local Coverage Area
We’re based in the Trophy Club area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Trophy Club
Most repair calls in Trophy Club are scheduled same-day or next-day. When you call (469) 530-2485, a live person gives you a firm arrival window, not a four-hour spread. Motor diagnostics and basic repairs are usually handled in one visit.
It depends on your community’s rules. Some Trophy Club neighborhoods require design review for a visible gate replacement, while a like-for-like repair usually proceeds without approval. We can tell you what’s typical and work from your HOA’s written requirements if you have them.
No. Estimates are free. We come out, look at the gate, and hand you a written price before any work starts. If you decide to move forward, the price on that sheet is the price you pay. If the repair fails within a year, the second visit is also free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Trophy Club Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.