Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Edgewood, WA
Gate repair in Edgewood means working on homes carved into the hillsides above the Puyallup River valley, where driveways slope, properties sit on terraced lots, and gates bear weather from every direction at once. We’re Carver Gate Repair, and our crews work on swing gates, slide gates, and gate motors across Edgewood seven days a week. Whether it’s a hinge pulling loose on a heavy steel gate or a motor that quit after a winter storm, you’ll reach a live person when you call (469) 530-2485, and you’ll get a written price before any work starts.
Why Edgewood Homes Are Different
Edgewood sits at the eastern edge of Pierce County, where the terrain shifts from flat valley floor to steep, wooded hillsides. That topography shapes gate work here. A gate on a 12-degree slope puts constant strain on its hinges and posts, and a slide gate on that grade will bind if the track settles even a quarter inch. We see more post-lean and sag issues in Edgewood than in flatter parts of the county, because winter rain saturates the soil and freezing nights push posts outward.
Most Edgewood properties have enough frontage for a real driveway gate, often mated to a separate pedestrian gate. Housing stock runs from 1970s ramblers to newer custom builds on larger lots, and many of those older systems predate current safety standards. The moisture here also punishes gate electronics: condensation inside the motor housing, corroded limit-switch contacts, and loop detectors that fail after years of wet soil are routine service calls for us in this city.
Our Main Edgewood Services
Most calls we take from Edgewood homeowners come down to two things: a gate that won’t open or close properly, and a motor that stopped responding. Each of the three services below has its own Edgewood page with local pricing and what the job involves.
Gate Repair in Edgewood
Edgewood’s gate failures tend to be structural: a post that’s leaned after a wet winter, a weld that cracked on a steel swing gate, a roller that wore through on a slide gate. Our technicians start by finding out whether the gate itself is sound before touching the operator. If the problem is mechanical, we quote the fix on the spot. Read the full breakdown on our Gate Repair in Edgewood page.
Gate Installation in Edgewood
A new gate in Edgewood has to be sized for the slope and the driveway’s approach angle. We measure, spec the gate and operator together, and run the install so the gate travels cleanly through its full arc without dragging or stalling. Every installation includes a written price, delivered before we order a single part. See what a full install includes on our Gate Installation in Edgewood page.
Gate Motor Repair in Edgewood
Wet soil and cool, damp air shorten the life of gate motors and their boards. When an Edgewood operator stops responding, we test the capacitor, the limit switches, the loop detector, and the power supply before quoting a fix or replacement. Many motor faults can be repaired same day if the part is stocked. Details, including motor-replacement pricing, are on our Gate Motor Repair in Edgewood page.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Edgewood
Our Edgewood trucks carry parts for the operators we see most on local driveways: Viking, DoorKing, Elite, and Ghost Controls among them. That stock means many motor repairs in Edgewood are completed in one visit rather than two. For the full lineup, see our brands.
Pricing for Gate Company in Edgewood, WA
| Service | Typical range in Edgewood |
|---|---|
| Gate repair, basic (hinge, latch, alignment) | $180 – $320 |
| Gate repair, structural (post reset, weld, heavy gate realignment) | $450 – $900 |
| Gate motor replacement (operator only, parts and labor) | $700 – $1,500 |
| Gate motor repair (limit switch, capacitor, loop detector) | $200 – $450 |
| Swing gate installation, single leaf (including operator) | $2,500 – $5,000 |
| Slide gate installation, single leaf (including operator) | $3,500 – $6,500 |
| Pedestrian gate installation | $800 – $1,800 |
| Keypad / intercom addition | $350 – $800 |
| Safety photo-eye replacement | $150 – $300 |
| Full gate system (gate + operator + safety, residential) | $5,000 – $9,500 |
Edgewood pricing gets pushed higher by steep grades that require heavier operators and by long power runs from the house to the gate. Whatever the job, the number we quote is the number you pay: written, agreed, and fixed before work begins.
Neighborhoods We Serve in Edgewood
We cover all of Edgewood, from the ridge-top neighborhoods along Meridian to the wooded lots near Jovita and the flatter streets close to the Milton border. Most calls get a same day or next day visit, depending on the season.
- Jovita
- North Hill
- Edgewood Heights
- Meridian corridor
- Orchard Estates
Service Area – Cities Near Edgewood
Our Edgewood schedule also reaches neighboring cities when the crew is in the area. If you’re in Tacoma, WA or Seattle, WA, we route calls to the nearest available technician. We also serve homeowners in Spokane, WA and Vancouver, WA through our broader Washington coverage.
Serving Edgewood, WA – Our Local Coverage Area
We’re based in the Edgewood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Edgewood
Most Edgewood calls get a same day or next morning visit. If a gate is stuck open or blocking a car in the driveway, tell the dispatcher when you call, and we’ll move that call up the schedule. The phone at (469) 530-2485 is answered by a person, any hour, any day.
Many Edgewood neighborhoods have covenants that govern gate height, materials, and setback from the street, and Pierce County may require a permit for a new permanent structure. We’ll flag what applies to your property at the estimate, but the approval itself comes from your HOA or the county, not from us.
Every repair done by Carver Gate Repair in Edgewood carries a written guarantee good for a full year from the date of service. If the same repair fails inside that window, we return and fix it at no charge. That promise is printed on the work order, not spoken and forgotten.
If your gate is giving you trouble in Edgewood, call (469) 530-2485 for a free estimate and a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Edgewood Customers Say
"Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.