Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Northlake, TX
Gate repair in Northlake usually means one of three situations: a gate that has stopped opening, a motor that has burned out, or a gate that was installed by someone who treated it like a fence panel rather than a moving system. We are Carver Gate Repair, and we handle all three. Call (469) 530-2485 when the gate will not move and you need a written price before anyone touches a tool.
Why Northlake Homes Are Different
Northlake sits in the path of the same North Texas weather patterns that punish outdoor equipment across Denton County: hard sun, wind, and temperature swings that go from freezing nights to triple-digit afternoons. Gate motors, hinges, and control boards absorb all of it. A swing gate that works fine in October can bind in February when the ground shifts, and an articulating arm that has been quiet for years will suddenly strain against a post that has moved a quarter inch.
The lots here tend to be larger than in the inner suburbs. That means longer gate leaves, which means more weight on the hinge posts and more demand on the motor. Homes in Northlake are also newer on average, but newer does not mean problem-free. Builders install builder-grade operators, and those units fail at predictable intervals. When they do, the fix usually involves limit switches, loop detectors, or an operator that was undersized for the gate it was asked to move.
Our Main Northlake Services
The three services below cover nearly every call we take in Northlake. Each has its own page because each involves different equipment, different pricing, and a different decision process for the homeowner.
Gate Repair in Northlake
Most repair calls in Northlake start with a gate that will not open or will not close all the way. Sometimes the issue is a sagging leaf, sometimes a worn hinge, sometimes a broken weld. We start by finding out what is actually failing, then write the price down before the repair begins. No estimate that grows once the gate is taken apart. The full breakdown of what we repair, including the written one-year guarantee that comes with every job, is on the Gate Repair in Northlake page.
Gate Installation in Northlake
New gate installation in Northlake means measuring the drive, sizing the operator to the gate’s weight and length, and setting posts deep enough to hold up under North Texas wind and clay soil. It is scheduled work, not dispatched work. We measure, quote a written price, then order and install. The Gate Installation in Northlake page covers what a full install includes, from the post holes to the safety edges.
Gate Motor Repair in Northlake
When the motor runs but the gate does not move, or when the operator shorts out after a storm, that is motor work. We repair and replace operators on the brands already installed in Northlake homes, including Viking, Linear, Ghost Controls, and DoorKing. The Gate Motor Repair in Northlake page covers typical motor failure signs and the repair versus replace math in plain numbers.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Northlake
We carry parts and know-how for the operators we see most often in Northlake: Linear, Viking, Ghost Controls, and DoorKing. That means less waiting on a shipped part and fewer return trips. See the full list on our brands page.
Pricing for Gate Company in Northlake, TX
| Service | Typical range in Northlake |
|---|---|
| Gate repair (basic) | $150 – $450 |
| Gate repair (major) | $450 – $1,200 |
| Gate installation (standard single swing) | $1,800 – $4,500 |
| Gate installation (custom or double swing) | $4,500 – $9,000+ |
| Gate motor repair | $175 – $500 |
| Gate motor replacement | $500 – $1,800 |
| Control board replacement | $350 – $900 |
| Loop detector replacement | $250 – $600 |
| Limit switch adjustment or replacement | $150 – $350 |
| Hinge replacement (per gate) | $200 – $700 |
Longer gates and operators that have to move more weight push prices toward the top of those ranges. The other variable is what a previous installer left behind: bad wiring, undersized posts, or a motor that should never have been on that gate in the first place. Whatever the job, we hand you a written price before work starts, and that number does not move at the door.
Neighborhoods We Serve in Northlake
We run calls throughout Northlake’s residential and acreage communities. Response time is typically same-day for repairs and next-day for scheduled installation measures.
- Canyon Falls
- Ridge Northlake
- Pecan Square
- Johnsons Branch
- Harvest
Service Area – Cities Near Northlake
We also serve homeowners in the larger metro area, including Dallas, TX and Fort Worth, TX. For other Texas coverage, see our Houston, TX page, and in Florida we serve San Antonio, FL.
Serving Northlake, TX – Our Local Coverage Area
We’re based in the Northlake area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Northlake
Same-day dispatch is standard for repair calls in Northlake. We schedule a window, the technician arrives on time without changing the window twice, and you get a written price before any work starts. Call (469) 530-2485.
Most gate repairs and operator replacements do not require a permit. New installations can trigger a review depending on the HOA and the proximity to the street. We handle the technical side and will tell you if a permit is needed before we start. Call us and we will walk through what your project requires.
We do. Many Northlake communities have standards for gate height, material, and color. When a spec exists, we build the quote around it and keep the paperwork clean so the HOA approval does not hold up the install.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Northlake Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.