Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Aldine, TX
Carver Gate Repair handles gate repair, gate installation, and gate motor work across Aldine, TX. Most Aldine homes sit on generous lots with driveway gates that take a beating from Houston’s heat, humidity, and seasonal storms. We’re the gate company that shows up with a written price in hand before any work begins, and we answer the phone around the clock. If your gate is sagging, stuck, or silent, call (469) 530-2485 and a live person will pick up.
Why Aldine Homes Are Different
Aldine sits in Harris County’s north side, where the housing stock runs from 1960s ranch homes to newer subdivisions along Aldine Mail Route and the roads branching off I-45 and the Hardy Toll Road. The soil here is heavy clay, and it moves with every wet-dry cycle. Over years, that movement shifts gate posts out of plumb. A gate that swung clean in February may drag across the driveway by August because the post has settled or the hinges have pulled. We see that more often in Aldine than in areas with sandier ground.
Humidity is the other constant. Gate electronics, circuit boards, and limit switches degrade faster in coastal-plain moisture than they do in drier climates. Condensation inside a gate motor housing is a routine Aldine failure point. The heat also shortens battery life on solar gate systems, so a gate that works fine in the morning may be dead by late afternoon. Our local crews plan for these conditions rather than discovering them on site.
Many Aldine neighborhoods have no mandatory HOA, but driveway gate placement still has to respect county right-of-way and setback rules. When a new gate is involved, we verify those dimensions before we order material, so the installation doesn’t turn into a county compliance issue later.
Our Main Aldine Services
The two calls we get most from Aldine homeowners are a gate that won’t open and a motor that runs but won’t move the gate. Each service has its own Aldine page.
Gate Repair in Aldine
Aldine gate repair usually comes down to three things: a gate that drags because a post settled in clay soil, hinges or wheels that have worn under daily use, or a weld that cracked from years of Houston humidity working on unprotected steel. Our technicians bring the parts that cover most failures and a written price before touching the gate. If your gate leans, grinds, or won’t latch, the details are on our Gate Repair in Aldine page.
Gate Installation in Aldine
New gate installation in Aldine starts with measuring the driveway opening and checking the ground where the posts will sit. Clay soil means we set posts deeper and often use more concrete than a standard spec calls for. We also account for gate weight, swing clearance, and the power source for an opener if you want one. Every installation includes a written price and a one-year written guarantee, same as our repair work. Read more on our Gate Installation in Aldine page.
Gate Motor Repair in Aldine
Gate motor repair in Aldine often involves a limit switch that’s drifted, a control board that’s corroded, or a gear that stripped inside the operator. Humidity accelerates all three. We carry parts for FAAC, BFT, Linear, and Viking operators, and our technicians diagnose the motor before recommending any replacement. No one replaces a board on a guess. See Gate Motor Repair in Aldine for what we fix and what a typical motor replacement runs.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Aldine
Our Aldine trucks carry common parts for FAAC, BFT, Linear, and Viking gate operators, plus components for five other major brands. Carrying brand-specific parts locally means a motor repair doesn’t stall while someone waits on a shipment. Check our brands for the full list of operators we service.
Pricing for Gate Company in Aldine, TX
| Service | Typical range in Aldine |
|---|---|
| Gate repair service call | $75 – $125 |
| Hinge replacement (standard swing gate) | $180 – $340 |
| Gate wheel or roller replacement | $150 – $300 |
| Gate post reset or reinforcement | $350 – $650 |
| Gate opener circuit board replacement | $250 – $450 |
| Gate motor replacement (swing or slide) | $600 – $1,400 |
| Limit switch adjustment or replacement | $150 – $250 |
| Loop detector replacement | $200 – $350 |
| New driveway gate installation (single swing) | $1,500 – $3,000 |
| Full gate system with operator | $3,500 – $6,500 |
In Aldine, post reset work often runs higher than in drier parts of the metro because the clay soil makes post extraction and repouring heavier work. The number we quote is the number you pay, written down before any work starts. No gate job on this page carries a verbal-only price.
Neighborhoods We Serve in Aldine
We run calls across Aldine from the northern neighborhoods near Greens Bayou to the subdivisions off Aldine Mail Route and the streets along JFK Boulevard. Response for most Aldine gate repairs is same-day or next-morning, depending on when the call comes in.
- Greenfield Park
- Northside Aldine
- Westfield
- Hidden Meadow
- East Aldine
Service Area – Cities Near Aldine
Our Aldine crews also cover neighboring parts of the metro. Homeowners in Houston, TX call us for the same gate repair work. We also route jobs to nearby markets through our partner pages for Dallas, TX, Fort Worth, TX, and San Antonio, FL. Dispatch and scheduling are coordinated from the brand’s Houston office; crews serving Aldine live and work in this area.
Serving Aldine, TX – Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Aldine
Most Aldine calls get same-day or next-morning service. We take emergency calls 24 hours a day, and a live person answers the phone every time. Call (469) 530-2485 and we’ll tell you the next available window for your neighborhood.
Some Aldine properties fall under Harris County permitting rules for new gate construction, especially when a gate sits near a road right-of-way. We check setback and permit requirements before ordering material on any installation. Most repairs don’t require a permit at all.
Every repair made by Carver Gate Repair includes a written guarantee good for a full year from the date of service. If the same failure comes back inside that year, we return and make it right at no charge. That covers parts and labor, with no argument.
Call (469) 530-2485 for a free estimate on any gate issue in Aldine. A live person will answer, and the price we quote is the price you pay, in writing, before we start.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aldine Customers Say
"Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H.