Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Bee Cave, TX
Carver Gate Repair is the gate company Bee Cave homeowners call when a gate stops opening, drags on its hinges, or won’t close against the wind. We work exclusively on gates and gate motors across nine major brands, and every job starts with a written price before any work begins. Bee Cave’s mix of larger hillside lots, limestone terrain, and homeowner associations creates specific demands on gate hardware, and we plan for those conditions on every visit. If your gate is down, call (469) 530-2485 and a live person answers, day or night.
Why Bee Cave Homes Are Different
Bee Cave sits west of Austin on rolling limestone hills, and that terrain shapes how gates fail here. A gate hung on a slope carries more stress through its hinge posts than the same gate on flat ground. Wind off the Hill Country ridgelines also pushes against wide driveway gates, which is why we see limit switches working overtime and opener arms wearing faster than expected. Homes along Hamilton Pool Road, Falconhead, and the Spanish Oaks area often have long driveway runs where the gate motor has to work harder to move heavier custom steel or iron panels.
Water is the other constant. Bee Cave’s freeze-thaw cycles and occasional heavy downpours find their way into control boards, loop detectors, and conduit that wasn’t sealed properly at install. We open more gate motor housings here with corrosion or moisture damage than we do in flatter, drier parts of the Austin metro. HOA requirements also come up constantly in Bee Cave, where architectural committees often dictate gate height, material, and even paint color. If your neighborhood has a written gate spec, we install and repair to match it without guessing.
Our Main Bee Cave Services
Most Bee Cave calls fall into two categories: a gate that won’t move and a motor that’s making noise or giving out entirely. We also handle full gate installations when an old gate is too far gone to repair economically. Each service has its own Bee Cave page with pricing detail, but here’s the short version.
Gate Repair in Bee Cave
Gate repair in Bee Cave usually means one of three things: a hinge post has shifted out of plumb, the gate leaf has sagged and is dragging, or a weld or picket has failed. On sloped driveways we often find the gate was hung level to the ground rather than level to the post, which shortens the life of every moving part. We square the frame, reset the posts if needed, and replace worn hinges or rollers before they chew up the rest of the system. Full detail on Gate Repair in Bee Cave.
Gate Installation in Bee Cave
A new gate in Bee Cave has to stand up to Hill Country wind, hold its line on sloping ground, and clear HOA review if your community has one. We measure the opening, check post depth and concrete condition, and recommend a gate weight and operator pairing that won’t undershoot the load. The written price includes the gate, hardware, and installation, agreed before we order anything. See Gate Installation in Bee Cave for the full breakdown.
Gate Motor Repair in Bee Cave
When a Bee Cave gate motor fails, the cause is usually a limit switch out of adjustment, a capacitor that’s dried out, or a control board that got wet. We diagnose the exact fault rather than replacing the whole operator on a guess. Our technicians work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so the fix matches what’s already installed. Read more about Gate Motor Repair in Bee Cave.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Bee Cave
We carry service parts for Linear, Viking, and Ghost Controls operators on our trucks, along with common DoorKing and LiftMaster components, so many Bee Cave repairs finish in one trip. If we don’t have a proprietary board on hand, we order it from our brands network and return to install it as soon as it lands.
Pricing for Gate Company in Bee Cave, TX
| Service | Typical range in Bee Cave |
|---|---|
| Gate hinge replacement (standard steel or iron gate) | $180 – $360 |
| Gate post reset / re-set in concrete | $350 – $700 |
| Gate wheel or roller replacement | $120 – $280 |
| Gate opener arm replacement (swing gate) | $300 – $650 |
| Limit switch diagnosis and adjustment | $140 – $260 |
| Control board replacement (single gate operator) | $400 – $850 |
| Loop detector replacement and re-termination | $250 – $500 |
| Gate motor replacement (standard swing operator) | $900 – $1,800 |
| Full gate installation (single driveway, steel or iron) | $3,200 – $8,500 |
| Custom gate installation (large or HOA-spec driveway) | $8,000 – $16,000 |
What pushes a Bee Cave job toward the high end is usually the site rather than the parts. A gate hung on a long sloped driveway needs more labor to square and re-level, and a motor that has to move a heavy custom gate on an incline wears out faster and costs more to replace properly. Whatever the job, the price is written and agreed before our technician lifts a tool, and it does not move at the door.
Neighborhoods We Serve in Bee Cave
Our crews work throughout Bee Cave and the surrounding communities, from gated sections to streets with no HOA at all. Most Bee Cave service calls are reached within the same business day, and emergency calls for gates stuck open or closed get a live answer around the clock.
- Falconhead
- Spanish Oaks
- Barton Creek Lakeside
- The Homestead
- Hamilton Pool Road corridor
Service Area – Cities Near Bee Cave
Carver Gate Repair schedules Bee Cave work through our Austin-area dispatch office, with local crews covering the west Austin corridor. Beyond Bee Cave, our Texas service area extends to Houston, TX, San Antonio, FL, Dallas, TX, and Fort Worth, TX, covered through the same Garrison Standard practices.
Serving Bee Cave, TX – Our Local Coverage Area
We’re based in the Bee Cave area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Bee Cave
For a gate stuck open or closed, we aim for same-day response across Bee Cave, including Falconhead and Spanish Oaks. Calls are answered by a live person 24/7, and we’ll tell you on the phone when a technician can reach you. Call (469) 530-2485 for a straight answer.
If your Bee Cave community has an architectural review committee, yes, you usually need approval before changing gate style, height, or finish. We install to the written spec you provide, and if your HOA has questions, we can supply the technical details they need. Plan for a few extra weeks of review time.
Yes. We run crews throughout the Hamilton Pool Road corridor, Barton Creek Lakeside, and the outlying acreage lots that fall under a Bee Cave mailing address but sit outside city limits. The same written-price and written-guarantee terms apply no matter which side of the boundary your property sits on. Call (469) 530-2485 to confirm coverage for your specific street.
Need a gate company in Bee Cave that shows up with a written price and stands behind the work? Call Carver Gate Repair at (469) 530-2485 for a free estimate, any hour, any day.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bee Cave Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.