Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Cloverleaf, TX
Gate work in Cloverleaf is different from Houston proper because a broken gate out here is often the first line of defense on a larger lot, and when the operator fails, the whole property sits open. Carver Gate Repair is a gate specialist, not a generalist handyman, and we run every Cloverleaf job to The Garrison Standard: a written price before work starts, a background-checked technician at your gate, and a written guarantee on every repair, good for a full year. Call (469) 530-2485 and a live person answers, day or night.
Why Cloverleaf Homes Are Different
Most Cloverleaf properties are older single-family homes on lots that leave room between the curb and the front door. That space is usually filled with a driveway gate, a walk gate, or both, and many of them were installed years ago with operators that have been patched rather than properly serviced. The soil around Cloverleaf also shifts through wet and dry cycles, and steel gate posts set in concrete still move enough to knock swing gates out of alignment and put extra load on the hinges. We adjust for that on every swing gate service call because a gate that binds at the hinges burns out motors faster than age does.
Homeowners here deal with Harris County permit expectations and, in some subdivisions, HOA rules on gate height, setback, and finish. When a new gate goes in, we quote the work so the price includes the gate, the operator, and any safety edges required for the setup, and we can walk you through what your association will want to see before you sign anything.
Our Main Cloverleaf Services
The work Cloverleaf homeowners call us about most falls into three categories: repairing an existing gate, installing a new one, and putting in or replacing the motor that runs it.
Gate Repair in Cloverleaf
A sagging or dragging gate on a Cloverleaf driveway usually means worn hinges, a bent post, or a wheel and track system that has been carrying too much weight. Our crew works through the gate from the hinges to the latch, and every repair carries a written 365-Day Done Right Promise. If the same fault returns within a year, the second visit is free. Gate Repair in Cloverleaf
Gate Installation in Cloverleaf
A new gate in Cloverleaf starts with the swing or slide geometry your driveway can actually support, then moves to the operator and safety hardware. We measure on site, quote the full installed price in writing, and schedule a clean install with a uniformed, background-checked crew. Gate Installation in Cloverleaf
Gate Motor Repair in Cloverleaf
When a motor refuses to open, faults out, or opens but will not close, the issue is usually a limit switch, a loop detector, or a failing control board rather than the motorgear itself. Our technicians test the operator wired to the gate, explain what failed in plain language, and replace only what has to go. On every motor repair, the price is written before any work starts. Gate Motor Repair in Cloverleaf
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Cloverleaf
Our technicians work on gate motors from Viking, Ghost Controls, DoorKing, and Elite, among others. The right parts for these systems are usually matched to the home quickly because our scheduling is coordinated through the Houston office and parts run to Cloverleaf without a long detour. See our brands for the full list.
Pricing for Gate Company in Cloverleaf, TX
| Service | Typical range in Cloverleaf |
|---|---|
| Gate repair service call | $85 – $150 |
| Hinge and weld repair | $165 – $380 |
| Gate post reset or replacement | $260 – $600 |
| Gate operator or motor replacement | $650 – $1,900 |
| Gate installation, single swing | $1,400 – $2,800 |
| Gate installation, single slide | $1,800 – $3,400 |
| Control board replacement | $250 – $550 |
| Safety edge or photo eye replacement | $160 – $360 |
| Loop detector replacement | $190 – $420 |
| Full operator replacement with new safety edges | $1,100 – $2,900 |
What pushes Cloverleaf pricing toward the upper end of those ranges is usually the condition of the existing steel and the distance between the gate and the nearest power source. A gate post that has shifted in the soil, or a run of new conduit that has to cross a long driveway, adds labor and material to the job. Every quote is written and agreed before any work begins, so the number you approve is the number you pay.
Neighborhoods We Serve in Cloverleaf
We cover the full Cloverleaf area, from the residential streets that sit east of the Beltway to the homes that spread out toward the western edge of the community. Most repair calls are scheduled within the same day or the next business day depending on parts.
- Cloverleaf proper
- Northshore
- Channelview area
- East Houston side streets
- Sheldon Roads corridor
Service Area – Cities Near Cloverleaf
While this page covers Cloverleaf specifically, our crews also serve nearby communities across the metro area. If your property is outside Cloverleaf, you can find coverage details for Houston, TX, San Antonio, FL, Dallas, TX, and Fort Worth, TX.
Serving Cloverleaf, TX – Our Local Coverage Area
We’re based in the Cloverleaf area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Cloverleaf
Most Cloverleaf calls are dispatched the same day or first thing the next morning. Our scheduling runs through the Houston office and the phone is answered by a live person 24/7, so you will know when a technician is coming before you hang up. Call (469) 530-2485 to get a window.
Some gate installations in Cloverleaf require a Harris County permit, especially when new electrical or a new operator is part of the job. We quote the work and can tell you upfront whether a permit will be needed, and we coordinate the details with your HOA when one is involved.
Yes. Every Carver Gate Repair job in Cloverleaf receives a written price before any work starts. That is the Garrison Standard on every visit, and it is the same whether the job is a hinge repair or a full motor replacement. Estimates are free, and the number stays where it was written.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Cloverleaf Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.