Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Clovis, CA
Gate repair in Clovis, CA runs into the same handful of problems regardless of neighborhood: a swing arm that stopped mid-travel, a keypad that works for one code but not another, a chain that slipped its sprocket after years of valley dust worked into the links. Most Clovis gates are steel or iron, mounted on masonry pillars, and they fail in predictable ways that are quick to diagnose on site. Carver Gate Repair handles those failures the same way every time: a written price before any work starts, a background-checked technician at your gate, and a repair that carries a written one-year guarantee. Call (469) 530-2485 and a live person picks up, any hour.
Why Clovis Homes Are Different
Clovis is flat, hot, and dusty for long stretches of the year, and the housing stock reflects that. Many homes in older tracts like Sierra Vista and the neighborhoods around Clovis Avenue have masonry-pillared drive gates with inset iron or steel pickets. The pilasters crack over time because the soil in the San Joaquin Valley shifts with irrigation and drought cycles. That movement pulls gate hinges out of plumb, which puts uneven load on the operator and shortens motor life.
Newer construction north of the 180, along Shepherd and Teague in the Harlan Ranch and Loma Vista areas, tends toward full steel frames and lighter ornamental panels, but the motor mounts and limit switches still take punishment from the heat. Summer days routinely cross 100°F, and a swing operator mounted in direct sun will trip its thermal overload faster than the same unit in a coastal climate. Clovis soil is also fine and silty; it works into track rollers and hinge bearings and acts like lapping compound. A gate that gets serviced in this climate needs the bearings cleaned and re-greased, not just adjusted. That is the difference between a repair that holds and one that gets called back in six months.
Our Main Clovis Services
Most calls in Clovis fall into three buckets: a gate that stopped working, a gate that was never installed right, and a motor that runs but cannot find its limits. Each service has its own Clovis page with local pricing and specifics.
Gate Repair in Clovis
A sagging leaf, a bent hinge, a chain that jumps, a latch that won’t catch. Gate repair in Clovis usually starts with a straightedge and a level because the real problem is often that a masonry post moved. We straighten the frame, reset the hinges, and replace worn hardware before adjusting the operator so it is not fighting the structure. Clovis dust means we also clean and lubricate every bearing we touch, because skipping that step shortens the repair. See Gate Repair in Clovis for local price ranges and what a typical repair includes.
Gate Installation in Clovis
New gate work in Clovis means digging posts deep enough for valley soil, squaring the frame against pilasters that may have moved, and setting an operator that is matched to the weight and swing of the gate, not just the cheapest unit on the shelf. We install steel, iron, and ornamental gates, and we run the power and low-voltage wiring cleanly. Every installation gets a written price before materials are ordered and a written guarantee on the work. See Gate Installation in Clovis for what a full install includes.
Gate Motor Repair in Clovis
When the motor hums but the gate does not move, or the gate moves but will not stop where it should, the problem is usually a limit switch, a capacitor, a control board, or a gearbox that has ground itself down. Clovis temperatures push capacitors and boards harder than most climates. We test the operator in place, replace only what failed, and set the travel and force limits after the repair. See Gate Motor Repair in Clovis for motor-specific pricing and turnaround.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Clovis
We troubleshoot and repair Linear, Viking, Ghost Controls, and DoorKing operators in Clovis, along with five other major gate-motor brands. Common replacement parts are stocked locally for those four, which means most repairs are completed in one visit. See our brands for the full list of equipment we service.
Pricing for Gate Company in Clovis, CA
| Service | Typical range in Clovis |
|---|---|
| Gate repair (general) | $145 – $325 |
| Gate motor replacement | $550 – $1,200 |
| Gate motor repair | $145 – $500 |
| Gate installation (standard) | $1,800 – $4,500 |
| Custom driveway gate | $3,000 – $8,000 |
| Chain replacement (per gate) | $95 – $220 |
| Hinge repair/replacement | $120 – $280 |
| Control board replacement | $250 – $600 |
| Limit switch replacement | $120 – $240 |
| Keypad/access system install | $275 – $550 |
Two things push a Clovis gate repair up the scale: masonry post movement that has to be corrected before hardware will hold, and operators that have been running misaligned for years and burned out more than one component. Either way, the price you are quoted before work starts is the price you pay, in writing.
Neighborhoods We Serve in Clovis
We work the established neighborhoods around Old Town Clovis and Clovis Avenue, the tract homes in Sierra Vista and Temperance Avenue corridors, and the newer subdivisions across Harlan Ranch, Loma Vista, and the Shepherd and Teague corridors. Typical response in Clovis is same-day or next-day for repair calls, depending on when you call.
- Old Town Clovis
- Sierra Vista
- Harlan Ranch
- Loma Vista
- Temperance Avenue corridor
Service Area – Cities Near Clovis
Carver Gate Repair serves Clovis and the surrounding Central Valley communities. Scheduling for this area runs through our Fresno, Central Valley office. We also serve Fresno, TX, Sanger, TX, Fowler, CA, and Madera, CA.
Serving Clovis, CA – Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Clovis
Most repair calls in Clovis are scheduled same-day or next-day. The gate-repair crews are dispatched from our Fresno, Central Valley office, so Clovis addresses fall inside the regular service loop. Call (469) 530-2485 and you’ll speak to a live person, not a voicemail box, any hour of the day.
That depends on your subdivision. Many Clovis HOAs require written approval before a new gate goes in, and some have design standards for materials and finish. Repair work on an existing gate rarely needs approval, but if you are replacing the entire gate, check your CC&Rs first. We install to the HOA spec once you have it.
Correct. You get a written price before any work starts, and the number does not move at the door. If the job turns up something unexpected, we stop and bring it to you before doing anything else. That is the Garrison Standard, applied to every Clovis job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Clovis Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K.