Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Corinth, TX
Carver Gate Repair is the gate company Corinth homeowners call when a gate stops opening, a motor burns out, or a driveway entrance needs replacing. Our crews work exclusively on gates and motor systems, and we carry parts for nine major brands so most repairs finish in one visit. Whether it’s a swing gate on a half-acre lot off Post Oak Drive or a slide gate near Lake Sharon, we quote a written price before any work begins and back every repair with a full-year written guarantee. Call (469) 530-2485 and a live person answers, day or night.
Why Corinth Homes Are Different
Corinth sits on the eastern edge of Denton County, where clay-heavy soil shifts through wet and dry seasons. That movement puts real stress on gate posts and hinge alignment, and we see gate frames that bind or swing unevenly after a long dry summer followed by heavy rain. Homes here range from established neighborhoods near Corinth Parkway to newer developments around the southern end of town, which means we work on everything from older chain-link driveway gates to modern ornamental steel with keypad entry.
Many Corinth properties sit on larger lots than you’d find closer to the Dallas core, and a lot of them have long driveway runs where gate operators work harder and cycle more often. HOA requirements in several Corinth subdivisions also mean any gate change has to clear a design review, so we help homeowners understand what’s likely to pass before a quote gets signed. When a technician arrives, they know to check soil movement, operator duty cycles, and whether the existing mounting pads are still level.
Our Main Corinth Services
The two calls we get most in Corinth are for gates that won’t move and operators that have failed after years of Texas heat. Here’s what each job involves locally.
Gate Repair in Corinth
Gate repair in Corinth usually starts with a physical inspection of the gate itself: hinge wear, post shift, sagging leaves, and damaged welds on ornamental steel. On properties with clay soil, a gate that dragged fine in spring can bind by August when the ground dries and the posts move. Our technicians square the frame, adjust or replace hardware, and confirm the gate travels correctly before touching the operator. If the gate needs new hinges, a roller, or a weld repair, that’s covered under the same written quote you agreed to before work started. See Gate Repair in Corinth for cost ranges and what a typical repair visit includes.
Gate Installation in Corinth
Gate installation in Corinth means measuring the driveway opening, checking the grade, and selecting a gate and operator matched to how often it will cycle. Corinth lots often have gentle slopes or drainage swales near the entrance, and a gate installed without accounting for those conditions will hang crooked or strain the motor. We quote the full job in writing, including mounting pads, hardware, and the operator, so the number you approve is the number you pay. For details on material choices and installation timelines, see Gate Installation in Corinth.
Gate Motor Repair in Corinth
Gate motor repair in Corinth is the job we run most often in summer, when heat takes out capacitors, control boards, and aging swing arms. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, and we keep the most common boards, limit switches, and batteries stocked on the truck. A technician diagnoses the issue, quotes the repair in writing, and handles the replacement parts under a one-year guarantee. See Gate Motor Repair in Corinth for rates on specific motor jobs.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Corinth
Our Corinth crews are trained on Viking, Ghost Controls, DoorKing, and Elite equipment, among others. We stock common replacement parts for each so most repairs complete same-day without waiting on a distributor. See our brands for the full list of systems we service.
Pricing for Gate Company in Corinth, TX
| Service | Typical range in Corinth |
|---|---|
| Gate repair (labor + hardware) | $180 – $340 |
| Gate motor repair | $200 – $450 |
| Gate motor replacement | $600 – $1,600 |
| Complete gate installation | $1,800 – $6,000 |
Corinth’s clay soil is the biggest driver of repair cost, because a shifted post or a binding frame has to be addressed before the operator will hold up. Your price is written and agreed before any work starts, and it does not move at the door.
Neighborhoods We Serve in Corinth
We run calls across the whole city, from the established streets north of Corinth Parkway to newer sections south near Shady Shores. Response time for most Corinth jobs is same-day or next-day, depending on call volume.
- The Fairways
- Corinthian Ridge
- Timberview Estates
- Lake Sharon area
Service Area – Cities Near Corinth
Our Corinth crews primarily cover Denton County, and scheduling coordinates through the Dallas-Fort Worth office. For gate work in surrounding metros, see our pages for Dallas, TX, Fort Worth, TX, Houston, TX, and San Antonio, FL.
Serving Corinth, TX – Our Local Coverage Area
We’re based in the Corinth area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Corinth
Most Corinth calls get a same-day or next-day appointment, and emergency jobs are dispatched as soon as a technician is free. Call (469) 530-2485 and a live person will give you a straight answer and an arrival window.
Many Corinth subdivisions require design review for new gates or major changes, though repairs to an existing gate usually don’t. We can tell you what to ask your HOA and help you prepare the details a review board wants.
Yes. Every Carver job gets a written price before any work begins, and the number doesn’t change once we’re on site. Call (469) 530-2485 for a free estimate on gate work in Corinth.
When a gate stops working in Corinth, call (469) 530-2485. A live person answers, the estimate is free, and every repair is backed by a written one-year guarantee.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Corinth Customers Say
"Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.