Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Everman, TX
Carver Gate Repair handles gate repair, gate installation, and gate motor work for homeowners across Everman, TX. Most of the gates we see here are on slab foundation homes built from the 1950s through the 1980s, with a mix of chain-link, wrought iron, and newer steel gates. The compact lots and alley-access driveways in much of Everman mean we frequently work in tighter spaces than you’d find in newer suburbs, which changes how we stage tools and equipment. If your gate won’t open, sags on its hinges, or has a motor that’s stopped responding, call (469) 530-2485 and a live person answers.
Why Everman Homes Are Different
Everman sits in the path of north Texas weather that works against gate hardware year round. Summer heat bakes powder-coated steel until it fades and warps, and spring thunderstorms push water into posts, hinges, and motor housings. We regularly replace gate posts in Everman that have rusted out at ground level, especially on older chain-link and ornamental iron gates installed before modern galvanized coatings were standard.
The housing stock here leans toward mid-century single-family homes on smaller lots, which means many driveway gates were retrofitted onto existing fence lines rather than planned at construction. That leads to uneven post depth, awkward swing clearance, and motors that were undersized for the gate’s actual weight. We check post footings, hinge alignment, and operator draw together, because fixing one without the other just means a second visit.
Some Everman properties fall under HOA rules that dictate gate style, color, and even which way a gate swings. Before we spec a repair or plan an installation, we ask about HOA requirements and pull the relevant standards where needed. It saves homeowners an expensive redo and keeps the project moving.
Our Main Everman Services
Most Everman calls start with two problems: a gate that won’t move, or a gate that’s been removed and needs replacing. Each service below has its own detailed page with local pricing and job specifics.
Gate Repair in Everman
A sagging gate, a broken hinge, or a wheel that’s chewed through its track. These are common Everman repairs because our clay-heavy soil shifts with moisture, pulling posts out of plumb and throwing gate geometry off. We inspect the full swing path, weld or replace damaged hardware, and reset posts where the ground has moved. Gate Repair in Everman covers repair pricing, what we check on site, and how soon we can get a technician out.
Gate Installation in Everman
New gate installations in Everman must account for smaller setbacks and existing fence conditions. We build to your gate opening exactly, set posts below the local frost line, and match the gate to your HOA’s standards if one applies. Whether it’s a walk-through steel gate or a full driveway gate, the job starts with measurements and a written quote. Gate Installation in Everman explains the process from measure to final weld.
Gate Motor Repair in Everman
When an opener hums but the gate doesn’t move, or the remote stopped working, the problem is usually a limit switch, a control board, or a stripped gear in the operator. Everman’s storms and power surges hit motor components hard, and we replace failed parts rather than selling unnecessary full-motor swaps. Gate Motor Repair in Everman breaks down motor repair versus replacement cost and the brands we carry parts for locally.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Everman
Our technicians work on FAAC, BFT, Linear, and Viking gate operators, among others. We keep common boards, limit switches, and remote transmitters in our Dallas-Fort Worth parts inventory so Everman repairs don’t stall waiting on freight. Find the full list on our brands page.
Pricing for Gate Company in Everman, TX
| Service | Typical range in Everman |
|---|---|
| Gate hinge replacement | $120 – $260 |
| Gate wheel or roller replacement | $95 – $220 |
| Gate post reset or replacement | $300 – $650 |
| Chain-link gate repair | $140 – $310 |
| Wrought iron gate repair | $180 – $420 |
| Driveway gate motor repair | $240 – $560 |
| Gate motor replacement | $580 – $1,150 |
| Gate opener remote or receiver replacement | $85 – $190 |
| New gate installation (single residential) | $950 – $2,800 |
What moves the price in Everman is post condition, gate weight, and whether the existing operator can be rebuilt or needs a full swap. Clay soil that has shifted posts adds reset work before any hinge or motor repair holds up. Every price is written down and agreed before we touch a gate, so the number on the quote is the number on the invoice.
Neighborhoods We Serve in Everman
We dispatch gate technicians throughout Everman, including established residential pockets and the newer streets near the south side. Our DFW dispatch office schedules Everman calls for same-week service in most cases, and emergency gate-down calls route to a live dispatcher 24/7.
- East Everman
- Old Everman
- Biscayne Park area
- Everman Parkway corridor
- South Everman near the high school
Service Area – Cities Near Everman
Carver Gate Repair serves Everman and the surrounding north Texas communities. Homeowners in Fort Worth, TX and Dallas, TX can reach our DFW dispatch directly. We also maintain dedicated pages for Houston, TX and San Antonio, FL through the Garrison Partners network, so the same written-price standard follows you outside the metroplex.
Serving Everman, TX – Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Everman
Most Everman repair calls are scheduled for same-week service, and emergency gate-down situations that block a driveway or leave a property unsecured are routed to a live dispatcher 24/7. Call (469) 530-2485 and we’ll give you a straight answer on the next available window.
Some Everman neighborhoods require HOA approval before gate color, material, or swing direction changes. We ask about HOA rules at the start and can delay ordering materials until you confirm approval. For repairs that keep the same look and style, HOA review is rarely required.
Every gate repair from Carver Gate Repair carries a written guarantee good for a full year. If the repaired component fails during that window, we come back and make it right at no charge. No call-back fees, no argument, no second invoice.
Call (469) 530-2485 for a written estimate on any gate repair, installation, or motor job in Everman. A live person answers.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Everman Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K.