Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Glenn Heights, TX
Carver Gate Repair is the gate company Glenn Heights homeowners call when a swing gate stops closing or a slide gate motor burns out. We work exclusively on gates and gate motors, and every job starts the same way: a real person answers the phone, a background-checked technician drives to Glenn Heights, and you get a written price before any work begins. If your gate is down, call (469) 530-2485 and Lonnie Burke’s crew will get it sorted. This page covers how gate work runs in Glenn Heights specifically.
Why Glenn Heights Homes Are Different
Glenn Heights sits just south of the Dallas-Fort Worth line, and the gate work here has a few recurring patterns. The soil is the biggest one. Glenn Heights sits on the Ellis County side of the Trinity River basin, and the ground shifts with wet-dry cycles. Gate posts set without deep enough footings lean out of plumb within a few seasons, and a leaning post pulls the gate off its hinges until the latch no longer lines up. We see it regularly on properties off Bear Creek Road and Uhl Road, where the clay expands after spring rain.
The second pattern is heat and electrical wear. North Texas summers put real stress on gate control boards, limit switches, and loop detectors. A board that runs for years in a mild climate can fail in August here because the cabinet traps heat. We carry replacement boards for the brands homeowners in Glenn Heights actually have installed, which shortens the repair instead of turning it into a two-trip job. Flat terrain also means most Glenn Heights gates are vehicular gates rather than walk gates, which changes the operator sizing and the safety sensor layout.
Our Main Glenn Heights Services
Most Glenn Heights calls fall into two buckets: a gate that stopped working and needs repair, or a motor that runs but won’t move the gate. If you’re planning a new installation, that work runs through the same shop and the same written-price standard. Here’s how each service works in Glenn Heights.
Gate Repair in Glenn Heights
Gate repair in Glenn Heights usually means one of three failures: a bent or broken hinge, a gate dragged out of alignment, or a strike post that no longer lines up with the latch. Our technician checks the full swing path, welds or replaces what’s worn, and adjusts the gate so it closes true. Because the soil shifts here, we pay extra attention to post plumb and hinge load before calling the job done. Every repair carries Gate Repair in Glenn Heights pricing in writing before work starts.
Gate Installation in Glenn Heights
A new gate in Glenn Heights needs a footing deep enough to handle shifting clay, plus hinges sized for a full-size vehicular gate. We measure, fabricate, and hang the gate, then set the operator and safety edges so the whole system passes a load test before we leave. Homeowners on acreage off Hampton Road often want a wider custom gate, and we build for that. See Gate Installation in Glenn Heights for what a full installation includes and what it costs.
Gate Motor Repair in Glenn Heights
When the gate is heavy but the motor won’t move it, the problem is usually in the operator: a failed limit switch, a burned control board, a stripped gear, or a dead capacitor. In Glenn Heights, heat-related board failures spike in July and August, so we keep common boards stocked locally rather than ordering every time. We work on nine motor brands so the fix matches the system already installed. Gate Motor Repair in Glenn Heights includes same-day motor swaps when parts allow.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Glenn Heights
We service Viking, Ghost Controls, and DoorKing operators most often in Glenn Heights, along with Elite on newer installations. Common boards, limit switches, and remotes for these brands are stocked in our Dallas-Fort Worth parts inventory, which keeps most motor repairs to a single visit. See our brands page for the full list of what we service.
Pricing for Gate Company in Glenn Heights, TX
| Service | Typical range in Glenn Heights |
|---|---|
| Gate repair (labor and standard parts) | $245 – $520 |
| Gate motor repair (limit switch, capacitor, gear) | $285 – $610 |
| Control board replacement | $390 – $740 |
| Swing gate operator installation | $1,600 – $3,800 |
| Slide gate operator installation | $2,000 – $4,500 |
| Full gate installation (custom, vehicular) | $3,200 – $9,500 |
Heat-related motor failures and cast-iron or custom gates push repairs toward the higher end of these ranges in Glenn Heights. Whatever the number is, we write it down before any work starts. The price on the sheet is the price on the invoice.
Neighborhoods We Serve in Glenn Heights
We cover all of Glenn Heights, most calls answered same day or next morning depending on the queue.
- Glenn Heights Estates
- Hampton Road corridor
- West Glenn Heights
- Bear Creek Road area
- Uhl Road acreages
Service Area – Cities Near Glenn Heights
Our crews run Glenn Heights jobs locally and also cover the wider metro. If your property is on the edge of town or you split time between cities, you can reach the same office for Dallas, TX, Fort Worth, TX, and Houston, TX. Some clients also ask about our San Antonio, FL coverage, which runs through the same Garrison Standard.
Serving Glenn Heights, TX – Our Local Coverage Area
We’re based in the Glenn Heights area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Glenn Heights
Most Glenn Heights calls get a same-day or next-morning arrival window. Motor failures and safety hazards are prioritized. Call (469) 530-2485 and a live person gives you the window before you hang up.
Some Glenn Heights subdivisions require an HOA architectural review before a new gate or operator goes in. Repairs to an existing gate usually don’t. We handle the mechanical work and leave the HOA filing to you, but we’ll note what’s needed when we quote.
Yes. Our technicians are trained on the gate itself and the motor operating it, so a sagging gate and a burned board get addressed in the same visit when you tell us both symptoms up front.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Glenn Heights Customers Say
"Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H.