Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Heartland, TX
Carver Gate Repair is the gate company Heartland homeowners call when a gate stops opening, a motor quits mid-cycle, or a post has shifted far enough that the gate drags across the drive. We work exclusively on gates and the motors that run them, and every job starts the same way: a written price before any work begins. If you need a gate looked at in Heartland, call (469) 530-2485 and you’ll talk to a live person, day or night. Our Heartland crews handle everything from broken swing arms to full gate and operator replacement, and each of the three main services has its own detailed page linked just below.
Why Heartland Homes Are Different
Heartland sits far enough east of Dallas that the soil shifts through the year, and that movement is the root cause of a lot of the gate trouble we see here. Clay-heavy ground swells after spring rain and contracts through the dry heat of July and August. Gate posts set a few inches too shallow slowly lean, and a leaning post binds the gate against the latch or drags it across the concrete, which burns out motors faster than normal wear ever would.
Most Heartland homes are newer, built in the 2000s and 2010s, which means many original gates are reaching the age where factory operators begin to fail. Copper wiring in the original installs is generally solid, but we regularly find limit switches that were never adjusted properly when the home was finished, and loop detectors that were damaged when driveways were widened. The crews dispatched to Heartland know these patterns and look for them on the first visit, not the third. Because the neighborhood was master-planned with an HOA in many sections, homeowners also tend to need repair decisions made quickly and cleanly, with a written price they can show a board if asked.
Our Main Heartland Services
Most Heartland calls come in for one of two reasons: a gate that won’t open or close reliably, and a motor or operator that has stopped responding. The three services below cover what we do here, each with its own Heartland page.
Gate Repair in Heartland
Gate repair in Heartland usually means a weld that cracked at a hinge, a post that shifted in the clay soil, or a gate that sags enough to trip the safety edge. We inspect the full swing path, check post plumb, and write the price before cutting or welding anything. This is the service for physical gate damage and alignment. Gate Repair in Heartland details what a typical repair day looks like, including the written guarantee that covers the work for a full year.
Gate Installation in Heartland
New gate installations in Heartland are measured, ordered, and scheduled, never rushed. We set posts below the clay movement line, match the gate to the existing drive width and slope, and run the operator wiring before the gate is hung so nothing is an afterthought. A free measure and a written price come first. Gate Installation in Heartland covers the full process from measure to final walk-through, including what we do with the old gate and posts.
Gate Motor Repair in Heartland
When a Heartland gate won’t move but the gate itself is sound, the problem is almost always the operator: a burned control board, a failed limit switch, a capacitor that gave out, or a swing arm that stripped. We carry parts for the big brands on the truck, which means many motor repairs happen on the first trip. Gate Motor Repair in Heartland explains the diagnosis process, the brands we stock, and the written guarantee on every motor repair.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Heartland
Our Heartland trucks carry common parts for LiftMaster, DoorKing, Viking, and Elite operators, along with FAAC, BFT, Linear, Ghost Controls, and Mighty Mule. Carrying parts on the truck means many motor repairs in Heartland finish the same day. See our brands for the full equipment list.
Pricing for Gate Company in Heartland, TX
| Service | Typical range in Heartland |
|---|---|
| Gate repair (minor, hinges/weld) | $180 – $340 |
| Gate repair (post reset) | $400 – $750 |
| Gate installation (single swing, standard) | $2,800 – $5,500 |
| Gate installation (double swing, standard) | $4,500 – $8,000 |
| Gate motor repair (control board) | $250 – $500 |
| Gate motor repair (limit switch) | $150 – $300 |
| Gate motor replacement (residential swing) | $800 – $1,800 |
| Gate motor replacement (residential slide) | $1,200 – $2,500 |
| Loop detector replacement | $250 – $450 |
| Remote/keypad programming | $75 – $150 |
What pushes a Heartland price toward the upper end is usually post condition and access. A post that has to be reset in clay before any hardware gets touched adds labor, and a gate at the back of a long easement with no clear path for a welding rig takes more time. Whatever the number is, you’ll see it in writing before we start, and that written price is the price you pay.
Neighborhoods We Serve in Heartland
We dispatch to every section of Heartland, including the newer builds along the eastern edge and the original phases near the community center. Response for most Heartland calls is same-day when the call comes in before early afternoon; after that, we schedule for the next morning unless it’s an emergency, in which case a live person takes the call any hour.
- Heartland Original Phases
- The Preserve at Heartland
- Heartland East
- Heartland Town Center area
- Adjacent acreage lots off FM 741
Service Area – Cities Near Heartland
Most of our work stays inside Heartland proper, but our crews also cover nearby communities and the surrounding metro. If you’re just outside the neighborhood boundary, we still may be able to help. We also serve Dallas, TX, Fort Worth, TX, Houston, TX, and San Antonio, FL through our broader service network.
Serving Heartland, TX – Our Local Coverage Area
We’re based in the Heartland area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Heartland
Most Heartland calls get a same-day visit when they come in before about 2 p.m. Calls after that are scheduled for the next morning. Emergency calls are handled 24/7, and a live person always answers at (469) 530-2485, even on weekends and holidays.
Most Heartland HOAs require approval for new installations or major changes, but repairs to an existing gate usually don’t need board sign-off. If your section’s HOA does require documentation, our written estimate and scope-of-work sheet is generally what they ask to see. Call (469) 530-2485 and we’ll walk through your section’s typical process.
If you’re in Heartland or within a short drive of the community, yes. We serve all phases of Heartland and the surrounding acreage lots, and scheduling is coordinated from our Dallas-Fort Worth office. Call (469) 530-2485 and we’ll confirm coverage for your specific address in under a minute.
If your gate is acting up, stuck open, or dead at the keypad, call Carver Gate Repair at (469) 530-2485. You’ll get a live person, a straight answer, and a written price before any work starts. Estimates are free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Heartland Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.