Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Hornsby Bend, TX
Carver Gate Repair handles gate work across Hornsby Bend, TX, from swing gates on acreage off FM 969 to driveway gates in the subdivisions east of Austin-Bergstrom. Most calls in this area come down to two things: a gate that quit opening after a storm, or a gate that needs motor work after months of dust and heat. We quote a written price before any work starts, and the number does not move. Call (469) 530-2485 and a live person answers, day or night.
The three services we offer in Hornsby Bend each have their own page: Gate Repair in Hornsby Bend, Gate Installation in Hornsby Bend, and Gate Motor Repair in Hornsby Bend. This page is the overview: local pricing, neighborhoods, who we are, and the questions we hear most.
Why Hornsby Bend Homes Are Different
Hornsby Bend sits on Colorado River bottomland east of Austin, and the soil here is the story. It is heavy clay that swells after rain and contracts hard in summer. A gate post set without accounting for that movement will drift out of plumb within a couple of seasons. We see it most on ranches and acreage lots off FM 969 and along Harold Green Road, where gates are wider, heavier, and often tied to existing ranch fencing.
Winter freezes are rough on gate electronics here. Hard freezes coming off the river plain stress control boards that were not weather-sealed properly, and a run of ice followed by a fast thaw is exactly when we get calls about dead keypads and unresponsive operators. Summer is no better for unshielded components: heat plus dust cooked into a circuit board shortens its life. None of this is exotic; it is what Hornsby Bend is, and the work has to account for it.
Parts of Hornsby Bend sit across Travis and Bastrop counties, and permit expectations differ between them depending on where the property falls and whether the gate is on a public road approach. Many of the homes here were built as rural residential before the area filled in, so we regularly see driveway gates hung on pipe posts or attached to chain-link corners that were never designed for an automatic opener. We tell homeowners that before we touch the motor.
Our Main Hornsby Bend Services
Repair and motor work are the two calls we get most from Hornsby Bend homeowners. Below is what each job actually involves in this area.
Gate Repair in Hornsby Bend
Most repair calls start the same way: the gate worked yesterday and does not today. We start by checking what changed, whether that is a hinge that pulled loose in clay soil or a weld that finally gave out on a heavy ranch gate. In Hornsby Bend, we commonly replace sagging hinges, straighten posts that have shifted, and rehang gates so they swing without dragging. If a gate is off its track or caught on itself, we get it back in line that visit. Full details are on the Gate Repair in Hornsby Bend page, including what a typical service call runs in this area.
Gate Installation in Hornsby Bend
A new gate in Hornsby Bend means setting posts deep enough and wide enough for clay that moves. We measure the driveway, check the soil, and confirm the swing before we ever order a panel. Common installs here are single swing gates for driveways and double swing gates for wider entries on acreage. We also run the power and set the safety edges, which matters where children or livestock are on the property. For a full walkthrough of what gets built and what it costs, see Gate Installation in Hornsby Bend.
Gate Motor Repair in Hornsby Bend
When a motor stops or grinds and does not open, the cause in Hornsby Bend is usually one of three things: a control board that took a freeze, a limit switch out of adjustment, or a gear that stripped from fighting a gate out of alignment. We open the operator, test the output, and tell you what failed before we replace a part. We carry boards, arms, and remotes for common brands on the truck. Motor diagnostics and replacement are covered in detail on the Gate Motor Repair in Hornsby Bend page.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Hornsby Bend
We work on Linear, Viking, Ghost Controls, and DoorKing systems, among others. Common parts for these brands are stocked in our service vehicles, which keeps most repairs in Hornsby Bend to a single visit. If a board or arm has to be ordered, we tell you up front. See our brands for the full list.
Pricing for Gate Company in Hornsby Bend, TX
These are the ranges we see most often for gate work in Hornsby Bend. Every job gets a written price before work begins.
| Service | Typical Range in Hornsby Bend |
|---|---|
| Gate realignment (hinges, sag, drag) | $180 – $340 |
| Gate hinge replacement | $150 – $290 |
| Gate wheel replacement | $120 – $260 |
| Gate post repair / reset | $300 – $580 |
| Gate opener motor replacement | $650 – $1,300 |
| Gate control board replacement | $400 – $850 |
| Gate keypad installation | $250 – $520 |
| Gate sensor / safety edge replacement | $200 – $420 |
| Full single swing gate install | $2,800 – $5,200 |
| Full double swing gate install | $4,500 – $8,500 |
What pushes price up in Hornsby Bend is usually the ground: clay soil that requires deeper post footings, or a gate post that has shifted and needs to be pulled, set, and concreted before the gate can be rehung. The written price we hand you before the job starts is the price. It does not grow once the gate is open.
Neighborhoods We Serve in Hornsby Bend
We run calls throughout Hornsby Bend and the surrounding approach roads. Most of our work is in the subdivisions east of the river and the acreage lots that line FM 969 and the county roads feeding off it.
- Hornsby Bend proper, both Travis and Bastrop county sides
- Colorock and the streets off Harold Green Road
- Acreage and ranch entries along FM 969
- Properties along Webberville Road and the east river approach
For most non-emergency calls in Hornsby Bend, we can schedule within a day or two; emergency callouts are dispatched as they come in, and the phone is answered by a person around the clock.
Service Area – Cities Near Hornsby Bend
Beyond Hornsby Bend, we take calls across the region. Our dispatch and scheduling are coordinated from the brand’s Austin office, while crews serve Hornsby Bend locally. We regularly run jobs in Houston, TX, San Antonio, FL, Dallas, TX, and Fort Worth, TX. If your property is in one of these areas or between them, call and we will confirm coverage.
Serving Hornsby Bend, TX – Our Local Coverage Area
We’re based in the Hornsby Bend area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hornsby Bend
Most non-emergency calls in Hornsby Bend are scheduled within one to two business days. If the gate is stuck open or closed and it is a security problem, we treat it as an emergency and dispatch on the next available truck. The phone is answered by a live person 24/7, weekends and holidays included.
It depends on the property and which county side it falls on. Parts of Hornsby Bend sit in Travis County and parts in Bastrop County, and requirements differ. We can tell you what usually applies once we know the address and whether the gate is on a public road approach. The install itself is scheduled only after the price is in writing.
Check whether the breaker tripped and whether the gate is physically free to move. If the gate is bound or dragging, do not keep cycling the motor; that is what strips gears and burns out boards. Then call us. We diagnose first, show you what failed, and quote a written price before we replace anything. Call (469) 530-2485 and we will get a technician headed your way.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hornsby Bend Customers Say
"Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.