Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Jersey Village, TX
Carver Gate Repair is the gate specialist serving Jersey Village, TX. Most of our work here involves repairing and maintaining swing gates on larger residential lots, where a failed opener or a sagging leaf means a car parked in the driveway and a schedule thrown off. Jersey Village’s original 1960s and 1970s subdivisions have matured into neighborhoods with heavy tree lines and expansive driveways, and the gate systems in those homes are aging right along with the houses. If your gate won’t open or won’t close all the way, call (469) 530-2485 and a live person will answer, day or night.
Why Jersey Village Homes Are Different
Jersey Village sits along Highway 290 northwest of the Beltway, and the housing stock tells you most of what you need to know about the gate work here. The core neighborhoods were built in the 1960s through the 1980s, which means many homeowners are on their second or third opener system by now. Original chain-drive operators have been replaced, sometimes twice, and the wiring run to the gate post often dates back decades. When we open a control box in Jersey Village, we regularly find corroded terminal connections from years of Houston humidity.
The lots here run larger than what you’ll find inside the Loop, and many homes have long driveway runs from the street to the garage. That extra distance puts real stress on the operator, especially on hot afternoons when the motor runs longer and the gearbox has to work harder. Clay soil shifts with every wet-dry cycle, and a gate post that was plumb twenty years ago may have drifted enough to throw the leaf out of alignment, which loads the hinges unevenly and wears out the motor faster. We account for those conditions on every estimate, because a gate installed on shifting soil needs different attention than one on a stable slab.
Jersey Village also has a strong community identity, and some neighborhoods keep close watch on exterior changes. Before we install a new gate or upgrade to an automatic operator, we tell homeowners to check with their HOA on materials and finish. We’ll quote the work, handle the install, and make sure the hardware matches the neighborhood’s look, but the fastest approval always starts with the homeowner checking the covenant first.
Our Main Jersey Village Services
Most calls we take from Jersey Village fall into two buckets: a gate that has stopped working, and a homeowner who wants to upgrade or replace it. Below are the three services we run most often in this area, each with its own dedicated page so you can see exactly what the job involves and what it costs.
Gate Repair in Jersey Village
This is the work that fills most of our Jersey Village days. Gates here lean, drag, bind, or stop responding to the remote, and the cause is usually one of three things: worn hinges, a bent or rusted frame, or an operator that has lost its mind. We replace wheel assemblies, re-hang leaves, adjust limit switches, and bring gates back to square. Every Gate Repair in Jersey Village job starts with a written price and ends with a full-year written guarantee, no exceptions.
Gate Installation in Jersey Village
New construction in Jersey Village isn’t what it was forty years ago, but plenty of homeowners are still upgrading from a chain-link opening to a proper steel or ornamental driveway gate. We measure the opening, check grades, factor in the clay soil, and build the gate to match the house and the HOA’s rules. Gate Installation in Jersey Village covers the full run: posts, frame, hinges, operator, and the safety equipment that keeps the gate from closing on a car or a child.
Gate Motor Repair in Jersey Village
When the gate doesn’t respond, the leaf is fine but the motor is likely gone or the motherboard has failed. We troubleshoot operators from Viking, Ghost Controls, DoorKing, and Elite, and we keep common control boards and limit switches on our trucks so many Jersey Village motor repairs are done on the first visit. Gate Motor Repair in Jersey Village covers diagnostics, board replacement, gearbox rebuilds, and wiring repairs, always with the written price before we start.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Jersey Village
We work on gate operators from Viking, Ghost Controls, DoorKing, and Elite, and our trucks carry the control boards, remotes, and limit switches that keep those systems running. If you’re not sure what brand you have, open the control box and read the label, or call us and describe what it looks like. See our brands for the complete list.
Pricing for Gate Company in Jersey Village, TX
| Service | Typical range in Jersey Village |
|---|---|
| Gate repair diagnostic visit | $75 – $125 |
| Hinge replacement (per pair) | $180 – $320 |
| Gate wheel or caster replacement | $120 – $220 |
| Gate frame straightening | $250 – $500 |
| Gate opener motor replacement | $450 – $850 |
| Control board replacement | $250 – $500 |
| Limit switch adjustment or replacement | $120 – $220 |
| Loop detector replacement | $200 – $400 |
| Full gate installation (single swing) | $2,800 – $5,200 |
| Full gate installation (double swing, with opener) | $4,500 – $8,500 |
What pushes a Jersey Village price toward the top of a range is usually the driveway length, because a longer run calls for a stronger operator and more conduit work, plus the age of the existing wiring. The price you get from us is the price you pay, written down before any work starts, and it doesn’t move at the door.
Neighborhoods We Serve in Jersey Village
We cover the entire city of Jersey Village, from the older streets around Jersey Meadow and the golf course to newer builds near the western boundary. Most calls get a same-day or next-day visit, and we schedule around your gate, not the other way around.
- Jersey Meadow
- Village Center area
- The neighborhoods along Rio Grande Drive
- Homes east of Jersey Drive
- Western subdivisions near the golf course
Service Area – Cities Near Jersey Village
From our Houston-area dispatch, we also run calls into Houston, TX, San Antonio, FL, Dallas, TX, and Fort Worth, TX. The same written pricing and full-year guarantee apply in every market we cover.
Serving Jersey Village, TX – Our Local Coverage Area
We’re based in the Jersey Village area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Jersey Village
Most Jersey Village calls are reached the same day or the following morning. We schedule arrival windows, not open-ended “sometime today” blocks, and the dispatcher who answers (469) 530-2485 gives you a straight answer when you call.
It depends on your neighborhood covenant. Some Jersey Village HOAs require written approval before a gate replacement or a new automatic operator is installed, and others only care about exterior finish. You handle the covenant; we’ll match the hardware and the materials to what the HOA allows, and we’ll quote the work either way.
Every repair we do in Jersey Village carries a written 365-Day Done Right Promise. If the repair fails within a year, we return and fix it at no charge, no argument. The guarantee is printed on your invoice, not just mentioned on the phone.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Jersey Village Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K.