Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Kirby, TX
Gate work in Kirby, TX runs on two timelines: what the soil does to posts, and what the heat does to motors. Most Kirby homes sit on flat lots with open front yards where a gate is the first thing visitors touch. When it won’t open at 7 a.m., the whole day stalls. We’re Carver Gate Repair, and our Kirby crews handle gate repair, installation, and motor work with written prices before anything gets touched. Call (469) 530-2485 and a live person answers, any hour.
Why Kirby Homes Are Different
Kirby sits just northeast of San Antonio, and the housing stock runs older and modest: single-family homes built from the 1950s through the 1980s dominate, with driveways set close to the street and gate posts poured decades before today’s heavier operators came along. Clay soil shifts seasonally here. Dry summers pull moisture from the ground and posts loosen, which throws swing gates out of plumb and drags slide gates across their track. The first sign is usually a gate that scrapes at the latch or a motor that whines under load. Add in months of hundred-degree heat, and control boards and limit switches get worked hard in ways a mild-climate install never does.
Because many Kirby properties sit outside a formal HOA, gate decisions stay between the homeowner and the city’s code requirements. That means quicker approvals, but it also means no one is checking that the original install met current safety standards. We regularly see Kirby gates with missing safety edges or photo eyes that were never wired. Our crews treat every job as if a child will be near that gate, because in these neighborhoods, they will be.
Our Main Kirby Services
Most Kirby calls fall into two buckets: a gate that stopped working, and a motor that runs but no longer operates the gate correctly. Each has its own dedicated Kirby page, with pricing and service details written out in full.
Gate Repair in Kirby
A Kirby gate repair usually starts with an autopsy of the moving parts: hinges, rollers, track, post anchors, and the latch. What we find often traces back to that clay soil and a post that moved half an inch. Our repair work includes re-anchoring posts, straightening frames, replacing worn hinges and rollers, and dialing the gate back to line and level. We also replace broken safety edges on the spot. One local habit worth knowing: Kirby gates that open over concrete driveways expand in summer heat, so clearance that worked in January binds in July. Full detail is on our Gate Repair in Kirby page.
Gate Installation in Kirby
New installations in Kirby require a different sequence than the rest of San Antonio: we start with a soil assessment and post depth, because clay that grabs a post in wet weather lets it wobble in a drought. Our Kirby crews set posts below the area’s typical shrink line, then build the gate to the swing direction that matches the driveway slope. Whether you need a simple walk gate or a driveway swing with an operator, every install includes a written line-item price before the first hole is opened. Gate Installation in Kirby covers the full process and what to expect.
Gate Motor Repair in Kirby
Most motor failures we see in Kirby are not the motor itself. It’s a limit switch that no longer tells the board where to stop, a loop detector that quit sensing a parked car, or a control board cooked by a summer lightning strike. We bench-test the full system before replacing anything, and we carry parts for major brands on the van so a typical Kirby motor repair is a one-trip job. When a motor is genuinely dead, we give you the number to replace it before we wrench anything. See Gate Motor Repair in Kirby for specifics.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kirby
The Kirby homes we visit run a mix of older Linear and DoorKing swing operators, plus a growing number of Ghost Controls and Viking units on newer installs. Our techs carry common boards, limit switches, and remotes for these lines, which keeps most Kirby repairs on a single visit. We train across the full our brands range.
Pricing for Gate Company in Kirby, TX
| Service | Typical range in Kirby |
|---|---|
| Gate hinge or roller replacement | $165 – $285 |
| Gate post re-anchoring (single post) | $260 – $480 |
| Swing gate alignment and latch rebuild | $180 – $340 |
| Slide gate track repair | $290 – $530 |
| Limit switch replacement | $145 – $255 |
| Loop detector replacement | $210 – $360 |
| Control board replacement | $235 – $450 |
| Swing gate motor replacement | $540 – $950 |
| Slide gate motor replacement | $680 – $1,180 |
| New walk gate, installed | $780 – $1,400 |
| New driveway swing gate, installed | $2,400 – $5,600 |
| New driveway slide gate, installed | $3,200 – $7,800 |
Prices in Kirby push to the higher end when a post has shifted enough to need re-pouring, or when heat damage means replacing both the motor and the control board rather than one or the other. Whatever the number, it is written down and agreed to before work starts. That number is the number. If a repair fails within a year, the second visit is free.
Neighborhoods We Serve in Kirby
We work all across Kirby, from the older blocks near Ackerman Road to the residential streets off Binz-Engleman and the newer construction pushing toward the eastern edge of town. Crews are local to the San Antonio metro and can usually reach a Kirby address within a few hours of the call.
- The neighborhoods off Ackerman Road
- Streets around Hopkins Elementary
- Residential pockets along Binz-Engleman Road
- The newer builds on the east side near FM 78
- Homes near Kirby Middle School
Service Area – Cities Near Kirby
Beyond Kirby, our crews cover the wider San Antonio metro and most of central Texas. We run calls into San Antonio, FL to the east, up toward Dallas, TX and Fort Worth, TX for scheduled installs, and across to Houston, TX for larger projects. Dispatch runs from the brand’s San Antonio office. Call (469) 530-2485 and we’ll confirm which crew covers your street.
Serving Kirby, TX – Our Local Coverage Area
We’re based in the Kirby area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Kirby
Same day in most cases. Kirby callers who reach us before noon are usually seen by that afternoon or early evening. Evening calls roll to our live 24/7 line and get scheduled for the next available morning, unless the gate is stuck open and needs immediate attention. Call (469) 530-2485 and we’ll tell you the window straight.
Most Kirby homes are not in an HOA, which usually means no architectural review. City permit requirements are light for repairing an existing gate. For a new driveway gate, Kirby code follows Bexar County standards on setback and operator safety, and we handle the paperwork if a permit is needed.
Every repair comes with a written guarantee covering parts and labor for a full year from the date of service. If the same repair fails inside that window, we return and fix it at no charge. It’s written on the invoice, not promised over the phone. That’s the Garrison Standard, and it’s non-negotiable.
Call (469) 530-2485 for a free estimate on any gate work in Kirby. A real person answers, a written price arrives before any tool is picked up, and the guarantee is on paper. The work is done right the first time. If it isn’t, we return free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kirby Customers Say
"Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.