Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Manhattan, NY
Finding a gate company in Manhattan, NY that shows up on time and quotes a price that holds is harder than it should be. Carver Gate Repair runs residential gate work across Manhattan with background-checked, uniformed technicians, written pricing before any work begins, and a written guarantee on every repair that covers a full year. Call (469) 530-2485 and a live person answers, 24 hours a day. The service pages linked just below cover each specific job we do here.
Why Manhattan Homes Are Different
Manhattan gate work carries challenges that don’t exist in the outer boroughs or the suburbs. Density is the first one. A gate off a narrow Upper West Side brownstone sidewalk or a rear service alley near SoHo has almost no staging room, and neighbors, pedestrians, and building superintendents all have a view of the job. That’s fine when a crew keeps the work area clean and moves deliberately. It’s a problem when a technician treats the sidewalk like a workshop and leaves hardware and cable clippings behind. Our crews work like a tenant, not a visitor, because in Manhattan the public right-of-way is effectively the front yard for most residential gates.
Weather matters here in ways it doesn’t in drier cities. Coastal humidity and winter salt air off the Hudson and East Rivers accelerate rust on steel gates and corrosion on terminals and exposed motor housings. We see more seized hinges and swollen limit-switch housings near the waterfront than on interior blocks. Buildings near Riverside Drive or the FDR take the worst of it. Any Manhattan gate repair needs weather-sealed electrical connections and hardware rated for salt exposure, or the same repair comes back in two seasons.
Housing stock matters too. Manhattan has a thick inventory of pre-war townhouses and co-op buildings with original ironwork gates, plus a rising number of modern condos with automated driveway and service-corridor gates. The older iron gates are often beautiful and mechanically tired. The newer automated systems are typically motor-heavy and sensor-dependent. Both live in a city where permit requirements and landmark rules can change by building and by block, so a technician who has worked on the Upper East Side may face a different approval reality in Greenwich Village. We navigate that ahead of the workday, not after the job starts.
Our Main Manhattan Services
Manhattan homeowners call us for three jobs more than anything else: a gate that won’t open, a gate that needs to be replaced, and a motor that runs but doesn’t move the gate.
Gate Repair in Manhattan
Most Manhattan gate repair calls start with a gate that drags, sags, or won’t latch. In this borough we’re often working on older iron gates set into brick or stone piers that have shifted over decades, so the issue is rarely just one hinge. We check the frame, the hardware, the alignment, and the ground clearance together, because a gate that scrapes a settled sidewalk near Union Square isn’t fixed by replacing a wheel. You get a written price before any work starts, and the repair is backed by the 365-Day Done Right Promise. Gate Repair in Manhattan
Gate Installation in Manhattan
Gate installation in Manhattan is a different job than it is in a suburb with a wide driveway and no sightlines to manage. We’re measuring walkways, rear service entrances, and building entries where the gate has to clear pedestrian traffic, meet fire access needs, and match the streetscape. Installation here means a site measure, a written price, and a scheduled install; this isn’t same-day work, and we don’t pretend it is. Every installation includes the bracket hardware, concrete-anchored posts, and a clear walkthrough of operation and maintenance. Gate Installation in Manhattan
Gate Motor Repair in Manhattan
A gate motor in Manhattan runs in tight, often damp locations: behind a garden gate off a Chelsea mews, under a stairwell near the East Village, inside a steel housing that hasn’t been opened in years. We service Viking, Ghost Controls, DoorKing, and Elite operators, and the work usually means diagnosing whether the board, the limit switch, or the capacitor is the actual failure before replacing anything. You’ll know the motor’s condition, the repair path, and the exact price before we touch a wire. Gate Motor Repair in Manhattan
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Manhattan
We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. Our Manhattan techs carry common Viking and Ghost Controls boards, DoorKing limit switches, and Elite remotes on the truck, so many motor failures are resolved on the first visit. See our brands for the full equipment list.
Pricing for Gate Company in Manhattan, NY
Gate work in Manhattan carries a genuine price range because some jobs are a swapped board and some are a re-hung iron gate on a settled sidewalk. Here are the line items homeowners ask about most. Every price is quoted in writing before any work starts.
| Service | Typical Range in Manhattan |
|---|---|
| Service call / diagnostic visit | $75 – $125 |
| Gate hinge repair or replacement | $180 – $420 |
| Gate sag adjustment and realignment | $150 – $300 |
| Latch or lock repair | $95 – $240 |
| Gate wheel or roller replacement | $120 – $300 |
| Gate frame repair or welding | $250 – $750 |
| Motor replacement | $650 – $1,200 |
| Control board replacement | $220 – $520 |
| Limit switch or sensor replacement | $140 – $340 |
| Full gate installation | $2,000 – $7,000 |
Two things push Manhattan prices toward the upper end of those ranges: access and condition. A gate wedged into a tight Chelsea service alley with no vehicle parking nearby costs more to service than one with a clear approach. And old iron gates on landmark blocks often need frame work discovered only after the gate is lifted and inspected. We quote the job, in writing, before any tool touches the gate, and the number on that quote is the number you pay.
Neighborhoods We Serve in Manhattan
We cover the full borough, from Battery Park City up through Inwood. Each neighborhood has its own gate stock and its own rhythm, and our techs know the difference between a SoHo service entrance and a Washington Heights brownstone front gate.
- Upper West Side
- Upper East Side
- Greenwich Village
- Chelsea
- Harlem
- Battery Park City
Typical response time for a Manhattan service call is same-day for motor failures and non-working gates, and next-day for installations and new-gate measures.
Service Area – Cities Near Manhattan
Most of our work stays on the island, but we do cross the bridges for clients who own property in multiple boroughs. Our coverage extends to Brooklyn, NY, Staten Island, NY, Bronx, NY, and up through Mount Vernon, NY. If you’re just outside Manhattan and need a gate motor or iron gate repaired, call and we’ll tell you when a tech can be there.
Serving Manhattan, NY – Our Local Coverage Area
We’re based in the Manhattan area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Manhattan
It depends on the building and the block. Landmarked districts and co-op buildings often have their own approval layers for visible front gates, while rear service gates and motor replacements typically fall outside that process. We flag any permit or approval reality during the estimate so the job doesn’t stall mid-way.
Same-day dispatch is available for non-working gates and motor failures across Manhattan. We schedule installations and new-gate measures on a set appointment window so the measure is done correctly, not rushed between service calls.
Every repair we do in Manhattan carries a written 365-Day Done Right Promise. If the same repair fails within a year of the service date, we return and make it right at no charge. That’s the policy in writing, not a verbal promise.
Contact Carver Gate Repair in Manhattan
If you have a gate that won’t open, a sagging iron gate, or a motor that hums but doesn’t move, call (469) 530-2485. A live person answers, you’ll get a straight answer, and we’ll schedule a tech for a written, upfront price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Manhattan Customers Say
"Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H.