Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Nassau Bay, TX
Carver Gate Repair provides gate repair, gate installation, and gate motor repair in Nassau Bay, TX, with written pricing delivered before any work begins and a written one-year guarantee on every repair. Nassau Bay’s homes sit close to Clear Lake, which means salt-laden air, steady humidity, and storm cycles that work on gate hardware year-round. If your gate is binding, sagging, or the motor runs without moving the gate, call (469) 530-2485 and we’ll get a technician out to look at it.
Why Nassau Bay Homes Are Different
Nassau Bay is a small, established community in Harris County, built around Clear Lake and the NASA Johnson Space Center. The housing stock is largely 1960s and 1970s construction, which means most original driveway gates were either never automated or retrofitted years ago with operators that are now two or three generations out of date. Aesthetic choices run traditional here: steel and aluminum picket gates, ranch-style entryways, and a fair number of solid privacy gates on the back side of homes where the yard faces the water.
The climate is the bigger factor. Coastal humidity accelerates rust on hinges, latch hardware, and unsealed weld points. Salt exposure from the bay shortens the life of exposed steel frames. When a gate that has worked for years begins to drag or fail, the first things we check are the bottom hinge and the mounting posts, because in Nassau Bay those are the points that corrode first. We also see more than the usual share of limit switch and control board failures on motors that live outside in unshaded positions, which is common on west-facing driveways here.
Many Nassau Bay properties fall within deed-restricted or HOA-governed neighborhoods. Before we install a new gate or replace a motor with a different footprint, we work with the homeowner to confirm what the association requires for gate style, height, and operator placement. That step can save a homeowner from a notice and a redo. It is part of the job here, and we treat it as such.
Our Main Nassau Bay Services
Most calls we take from Nassau Bay homeowners fall into two categories: a gate that has stopped working correctly and needs repair, or a motor system that has failed and needs to be rebuilt or replaced. Below are the three services we provide here, each with its own page that goes into specific detail.
Gate Repair in Nassau Bay
We repair sagging gates, broken hinges, bent frames, damaged welds, and latch or lock failures throughout Nassau Bay. Coastal moisture means we pay close attention to the hardware that takes the most load: lower hinges, post anchors, and welds near the base of the gate. Before any repair work is quoted, we inspect the full gate path, from post to latch. The price we write down is the price you approve. Gate Repair in Nassau Bay covers the full scope of that work.
Gate Installation in Nassau Bay
New gate installation in Nassau Bay starts with measurements, post condition, and the swing or slide path your driveway will allow. We install steel, aluminum, and ornamental gates sized to the opening, and we set posts in concrete where existing footings are cracked or out of square. HOA requirements matter here, so we help confirm the approved style and height before you order a gate. Gate Installation in Nassau Bay explains the full process from measure to final walk-through.
Gate Motor Repair in Nassau Bay
Gate motor repair in Nassau Bay often comes down to a failed limit switch, a stripped gear, a shorted control board, or a loop detector that no longer senses the vehicle. We diagnose the installed brand and model, write the repair scope, and quote the parts and labor before any work starts. Motors near Clear Lake live in a harsh environment, and we replace or seal components with that in mind. Gate Motor Repair in Nassau Bay details common failures and what repair typically involves.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Nassau Bay
We work on Viking, Ghost Controls, DoorKing, and Elite gate motor systems in Nassau Bay, along with five other major brands. Our technicians carry common control boards, limit switches, and receivers for these brands so most repairs do not require a second trip. For parts that must be ordered, we tell you the lead time before we leave. See our brands for the full list.
Pricing for Gate Company in Nassau Bay, TX
These are the ranges we typically see for gate work in Nassau Bay. Every job is quoted in writing before work begins, so the number you approve is the number you pay.
| Service | Typical range in Nassau Bay |
|---|---|
| Gate repair (labor only, per visit) | $90 – $180 |
| Hinge replacement (parts and labor) | $120 – $260 |
| Latch or lock replacement | $80 – $190 |
| Bent frame straightening | $150 – $350 |
| Weld repair (per section) | $75 – $175 |
| Gate installation (single swing, no motor) | $1,200 – $3,200 |
| Gate installation (double swing, no motor) | $2,400 – $5,500 |
| Gate motor repair (labor, per visit) | $100 – $200 |
| Gate motor replacement (operator and labor) | $850 – $2,200 |
| Limit switch replacement | $130 – $280 |
| Loop detector replacement | $180 – $360 |
| Control board replacement | $250 – $550 |
What pushes a Nassau Bay quote toward the higher end of these ranges is usually corrosion. A gate that has spent ten years in salt air will need more prep work before new hardware goes on. Posts that have rusted inside the concrete footings sometimes need to be re-bedded, which is labor the homeowner cannot see until the old gate comes off. We quote it up front, in writing, before we start.
Neighborhoods We Serve in Nassau Bay
We serve the full Nassau Bay city limits and the immediate surrounding streets. Response time for most calls in Nassau Bay is same-day for urgent repairs and within one business day for scheduled work.
- Nassau Bay proper
- Point Lookout area
- Clear Lake Terrace
- Swan Lagoon area
- NASA Road 1 corridor
Service Area – Cities Near Nassau Bay
While this page covers Nassau Bay, Carver Gate Repair also serves homeowners in Houston, TX, San Antonio, FL, Dallas, TX, and Fort Worth, TX. If you are just outside Nassau Bay, call (469) 530-2485 and we will tell you which crew covers your street.
Serving Nassau Bay, TX – Our Local Coverage Area
We’re based in the Nassau Bay area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Nassau Bay
For urgent gate failures, we typically dispatch a technician to Nassau Bay the same day. Scheduled work is usually set within one business day. The phone is answered by a live person around the clock, so you will not leave a voicemail. Call (469) 530-2485 for a current arrival window.
For repairs that keep the same gate and operator, approval is rarely needed. For a new gate, a different height or style, or a motor that changes the footprint, the HOA may require prior approval. We will help you confirm what your association requires before any installation work is quoted or scheduled.
Most gate repairs do not require a permit in Nassau Bay. New installations that involve electrical runs or new post footings may need city review. We identify those requirements during the estimate and quote the work so that any required review happens before construction starts. Nothing is hidden and nothing is skipped.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Nassau Bay Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.